1. Home
  2. Cisco
  3. 350-601

Cisco 350-601 Online Practice Questions and Exam Preparation

350-601 Exam Details

  • Exam Code
    :350-601
  • Exam Name
    :Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
  • Certification
    :CCIE Data Center
  • Vendor
    :Cisco
  • Total Questions
    :708 Q&As
  • Last Updated
    :May 28, 2026

Cisco 350-601 Online Questions & Answers

  • Question 121:

    An engineer implements an Application Performance Monitoring (APM) solution. The solution runs in a vSphere infrastructure where the vSwitch support for promiscuous mode is disabled for security reasons. As a result, the final implementation must receive a copy of bidirectional traffic to a load balancer that is connected to a Cisco Nexus 93108 Series Switch. The APM solution supports GRE encapsulated traffic.

    Which configuration must be applied to the switch to meet this requirement?

    A. interface vlan1 switchport monitor destination ip 10.1.1.1 exit monitor session 1 rx monitor session 1 tx source interface ethernet1/9
    B. monitor session 1 both source interface ethernet 1/9 destination interface ethernet 1/12 erspan-id 1 vrf mgmt0 filter vlan 3 no shut
    C. configure terminal monitor session 1 type erspan-source erspan-id 1 destination ip 10.1.1.1 source interface ethernet 1/9 both vrf default no shut
    D. interface ethernet 1/9 erspan-id 1 monitor session 1 type erspan-source interface mgmt0 monitor session 1 type erspan-destination destination ip 10.1.1.1 no shut

  • Question 122:

    Which two components are used by the Cisco Nexus switches telemetry process? (Choose two)

    A. data encoding
    B. data manipulation
    C. telemetry agent
    D. telemetry compression
    E. data collection

  • Question 123:

    Which communication method does NFS use for requests between servers and clients?

    A. SMB
    B. RPC
    C. SSC
    D. XDR

  • Question 124:

    Refer to the exhibit.

    Why does the python code for Cisco NX-API print error message?

    A. The "type" is wrong in the header of the request and should be "cli_ conf".
    B. NX-API does not allow configuration for features via the requests module.
    C. The "type" is wrong is the body of the request and should be "cli_ conf".
    D. The JSON is not a supported format for the NX-API.

  • Question 125:

    Refer to the exhibit.

    An engineer must replace the Fabric Interconnect called UCS-FI LAB1 with the Fabric Interconnect called UCS-Fl LAB2. The new Fabric Interconnect must be restored with the latest configuration of UCS-Fl LAB1.

    Which backup type must be used to meet this requirement?

    A. All configuration
    B. Logical configuration
    C. Full state
    D. System configuration

  • Question 126:

    Refer to the exhibit.

    An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches becomes isolated.

    What is wrong with the implementation?

    A. E Ports on both MDS switches must be configured as F ports for the zoning to function.
    B. Zones are local to the MDS switch and name service must be used to activate the connection between E ports.
    C. Different zone set names must be configured on both MDS switches.
    D. Zones must have the same name on both MDS switches for the E ports to function.

  • Question 127:

    An engineer must perform backup and restore of the Cisco UCS Manager configuration. The configuration must be stored on a remote server via XML encoding. The backup must store the configurations of the chassis. FEX, rack servers. lOMs, and blade server.

    Which set of actions accomplishes these goals?

    A. Perform a logical configuration backup and run the replace import method.
    B. Perform a ful state configuration backup and run the restore procedure.
    C. Perform a system configuration backup and run the merge import method
    D. Perform an all configuration backup and run the system restore procedure.

  • Question 128:

    DRAG DROP

    Refer to the exhibit.

    Drag and drop the code snippets from the bottom onto the blanks in the code to complete the JSON request that implements the ACL presented. Not all code snippets are used.

    Select and Place:

  • Question 129:

    A network engineer is configuring the Cisco UCS service profile template with Ansible using this code:

    hostname: 192.168.10.23

    username: cisco

    password: f718c4329405726531f6247ff982 name: DCE-CTRL template_type: updating-template uuid_pool: UUID-POOL storage_pronte: DCE-StgProf maintenance_policy: default server_pool: Container-Pool host_firmware_package: 4.1(1a) bios_policy: Docker Which attribute must be used to apply the iSCSI initiator identifiers to all iSCSI vNICs for the service profiles derived from the service template?

    A. san_connectivity_policy
    B. lan_connectivity_policy
    C. boot_policy
    D. iqn_pool

  • Question 130:

    The Cisco UCS blade chassis must send SNMPv3 traps to a network monitoring system. The SNMP trap messages should be authenticated and have protection from closure.

    Which SNMP security privileged level should be configured?

    A. noPriv
    B. auth
    C. noAuth
    D. priv

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.