Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 231:

  Which three CLI configuration commands are for port profile as a private VLAN on Cisco Nexus 1000V Series switch? (Choose three.)

  A. Switch (config-port-prof)# switchport private-vlan trunk allowed vlan vlan-range
  B. Switch (Config)# port-profiletypevethernetname
  C. Switch (config-port-prof)# switchport mode private-vlan host promiscuous
  D. Switch (config-port-prof)# switchport Private-vlan mapping primary_Vlan add secondary_vlan
  E. Switch (config-port-prof)# switchport Private-vlan host-association primary-vlan secondary-vlan
  A. Switch (config-port-prof)# switchport private-vlan trunk allowed vlan vlan-range
  D. Switch (config-port-prof)# switchport Private-vlan mapping primary_Vlan add secondary_vlan
  E. Switch (config-port-prof)# switchport Private-vlan host-association primary-vlan secondary-vlan

• Question 232:

  Which switch is not a valid Cisco Nexus 7000 Series model?

  A. Cisco Nexus 7000 4-slot switch
  B. Cisco Nexus 7000 8-slot switch
  C. Cisco Nexus 7000 9-slot switch
  D. Cisco Nexus 7000 10-slot switch
  E. Cisco Nexus 7000 18-slot switch
  B. Cisco Nexus 7000 8-slot switch

• Question 233:

  Which three options are valid ACE probes? (Choose three.)

  A. HTTP
  B. Telnet
  C. Java scripting
  D. TCL scripting
  E. XML scripting
  F. SSH
  A. HTTP
  B. Telnet
  D. TCL scripting

• Question 234:

  The OTV overlay interface is a logical multiaccess and multicast-capable interface that must be explicitly defined by the user, and is the location where the entire OTV configuration is applied. Which two statements about the OTV overlay interface are true? (Choose two.)

  A. When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the overlay interface.
  B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.
  C. When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the join interface.
  D. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the overlay interface toward the routed domain.
  E. The OTV edge device performs the static OTV encapsulation on the Layer 3 packet and sends it to the join interface toward the switching domain.
  A. When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the overlay interface.
  B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.

• Question 235:

  Given a host with two NICs assigned to an N1k profile, which topologies are suitable for this type of configuration (Choose three.)

  port-profile type Ethernet name VM-Data vmware port-group switchport mode trunk switchport allowed vlan 400-410 channel-group auto mode active no shut state enabled

  A. Cisco UCS fabric interconnects
  B. Pair of N5K's in VPC.
  C. Standalone N5K
  D. Pair of N5K's in non-VPC
  E. Cisco Catalyst 6000 Switch in VSS
  B. Pair of N5K's in VPC.
  C. Standalone N5K
  E. Cisco Catalyst 6000 Switch in VSS

• Question 236:

  Consistency checks and compatibility checks are performed before a vPC is created. During a compatibility check, one vPC peer conveys configuration information to the other vPC peer to verify that vPC member ports can actually form a port channel. Which two statements about virtual port channel graceful consistency checks are true? (Choose two.)

  A. Graceful consistency check is enabled by default.
  B. When graceful consistency check is enabled, only the links on the secondary peer device are suspended.
  C. Graceful consistency check is disabled by default. To enable this feature, use the graceful consistency-check command under the vPC domain configuration mode.
  D. When graceful consistency check is enabled, only the inconsistent VLANs on the secondary peer device are suspended.
  E. Graceful consistency check is disabled by default.
  A. Graceful consistency check is enabled by default.
  B. When graceful consistency check is enabled, only the links on the secondary peer device are suspended.

• Question 237:

  Refer to the exhibit.

  

  What is the most likely reason for the output that is shown in bold in the exhibit?

  A. One or more of the VLANs that are assigned to the vNIC have been deleted from Cisco UCS Manager.
  B. One or more of the VLANs that are assigned to the vNIC are assigned to different disjoint Layer 2 uplinks.
  C. There are no Ethernet uplinks that are enabled.
  D. The host to which the vNIC belongs is currently powered off.
  E. The vNIC is currently active and uses the fabric failover peer vNIC.
  B. One or more of the VLANs that are assigned to the vNIC are assigned to different disjoint Layer 2 uplinks.

• Question 238:

  Refer to the exhibit.

  

  Company ABC recently implemented the network load balancing across distributed data centers. It doesn't work as expected. Which option is a possible solution to address the issue?

  A. Add static ARP entries on Cisco Nexus for both load balancers
  B. Add a new OTV broadcast group
  C. Use a dedicated VLAN for network load balancer
  D. Enable selective unknown unicast flooding
  D. Enable selective unknown unicast flooding

• Question 239:

  Which four statements about SNMP implementation on the Cisco Nexus 7000 Series switch are true? (Choose four.)

  A. Cisco NX-OS supports one instance of the SNMP per virtual device context.
  B. By default, Cisco NX-OS uses the default VDC for SNMP.
  C. SNMP supports multiple MIB module instances and maps them to logical network entities.
  D. SNMP is VRF aware. You can configure SNMP to use a particular VRF to reach the SNMP notification host receiver.
  E. Only SNMP version 3 is supported on NX-OS.
  F. Cisco NX-OS supports one instance of the SNMP per switch.
  G. Each VDC can have multiple SNMP sessions configured in it.
  A. Cisco NX-OS supports one instance of the SNMP per virtual device context.
  B. By default, Cisco NX-OS uses the default VDC for SNMP.
  C. SNMP supports multiple MIB module instances and maps them to logical network entities.
  D. SNMP is VRF aware. You can configure SNMP to use a particular VRF to reach the SNMP notification host receiver.

• Question 240:

  Which are valid statements about Cisco Virtual Interface Card (VIC)? (Choose two.)

  A. The Cisco VIC can create an unlimited number of Virtual NICs.
  B. The number of vNICs on the Cisco VIC that can be created is determined by the number of chassis uplinks.
  C. vNICs are created using software on the host operating system.
  D. The host operating system sees a vNIC as a physical PCIe device.
  E. The host operating system sees a vNIC as a sub-interface of a primary NIC.
  F. The Cisco VIC can create 1024 vNICs.
  B. The number of vNICs on the Cisco VIC that can be created is determined by the number of chassis uplinks.
  D. The host operating system sees a vNIC as a physical PCIe device.