Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 121:

  Which statement describes the below output from an MDS switch? Flow ID. 44 Initiator VSAN: 200 Initiator WWN: 50:06:04:8a: cc: 19:12: db Target VSAN: 200 Target WWN: 50:06:04:8c: de: ad: be: ef

  Target LUN: ALL LUNs Acceleration enabled Write-Acceleration Buffers: 1024 Configuration Status: flow verification failed

  

  A. The zone containing both the initiator and target does not exist
  B. The zone set has not been activated
  C. The target is not logged into the fabric
  D. The pWWN used for the target is invalid
  C. The target is not logged into the fabric

• Question 122:

  How are unified port expansion modules for Cisco UCS 6200 Series Fabric Interconnects licensed?

  A. All ports are fully licensed by default.
  B. The first eight ports on the module are licensed by default.
  C. The expansion modules contribute eight licenses to the global pool by default.
  D. The expansion modules contribute six licenses to the global pool by default.
  E. The first six ports on the module are licensed by default.
  D. The expansion modules contribute six licenses to the global pool by default.

• Question 123:

  Which two statements about the clear zone database vsan 2 command when performed on a Cisco Nexus 5500 switch are true? (Choose two.)

  A. Zone set for VSAN 2 is cleared from all switches in VSAN 2.
  B. The full zone set database is cleared for VSAN2 and the active zone set database for VSAN2 is untouched.
  C. This command is valid only if the feature clearzone is enabled.
  D. The active and full zone set for VSAN2 is deactivated and erased from the local switch.
  E. You must issue the copy running-config startup-config command to copy the active zone set database to the full zone set database after this command.
  A. Zone set for VSAN 2 is cleared from all switches in VSAN 2.
  C. This command is valid only if the feature clearzone is enabled.

• Question 124:

  Refer to the components below.

  Cisco UCS 6100 Fabric Interconnect Cisco Nexus 1000V Cisco UCS 5100 Blade Chassis

  Which data center design layer contains these components?

  A. the Virtualization layer
  B. the Management layer
  C. the Compute layer
  D. the Services layer
  C. the Compute layer

• Question 125:

  Which mechanism do the CNA and the Cisco Nexus 5000 Series Switches use to provide a lossless class of Ethernet traffic?

  A. LLDP
  B. LACP
  C. PFC
  D. FIP
  C. PFC

• Question 126:

  In one-armed design, which method must be used to achieve symmetric load balancing in ACE?

  A. Dual NAT
  B. Round Robin
  C. Dynamic Routing Protocol
  D. MAC Probe
  A. Dual NAT

• Question 127:

  Cisco IOS NetFlow gathers data that can be used in which three of these? (Choose three.)

  A. accounting
  B. authentication
  C. authorization
  D. network monitoring
  E. network planning
  A. accounting
  D. network monitoring
  E. network planning

• Question 128:

  Refer to the exhibit.

  

  Your company requires a Cisco UCS configuration that will, at a minimum, allow the configuration in the provided exhibit.

  Which Cisco UCS components will meet the requirement? (Choose three.)

  A. Cisco UCS 6148, Cisco UCS 6248UP, or the Cisco UCS 6296UP fabric interconnects
  B. Cisco UCS 2104XP Fabric Extender
  C. Cisco UCS 2204XP or 2208XP Fabric Extenders
  D. Cisco UCS M81KR Virtual Interface Card
  E. Cisco UCS Virtual Interface Card 1280
  F. Cisco UCS Virtual Interface Card 1240 with a port expander
  A. Cisco UCS 6148, Cisco UCS 6248UP, or the Cisco UCS 6296UP fabric interconnects
  E. Cisco UCS Virtual Interface Card 1280
  F. Cisco UCS Virtual Interface Card 1240 with a port expander

• Question 129:

  In a FabricPath network, known unicast traffic is sent with the outer destination address populated with the destination SID, SSID, and local ID. Which statement describes the outer destination address in the case of unknown unicast?

  A. The outer destination address is a reserved multicast MAC address known as MC1 (010F.FFC2.02C0).
  B. The outer destination address is a broadcast address (FFFF.FFFF.FFFF).
  C. The outer destination address is not required because FabricPath uses the FTag to forward unknown unicast.
  D. The outer destination address is a reserved multicast MAC address known as MC1 (010F.FFC1.01C0).
  D. The outer destination address is a reserved multicast MAC address known as MC1 (010F.FFC1.01C0).

• Question 130:

  The Cisco nexus 1000V Switch uses a multihypervisor licensing approach. Which three statements are true? (Choose three.)

  A. The Essentials edition comes with a 180-day trial for the Advanced edition.
  B. An advanced edition license is required for each CPU socket on each VEM.
  C. The VXLAN gateway is included in the Essential edition license.
  D. The Cisco Nexus 1000 v switch supports Essential and Advanced license editions.
  E. Only the Advance edition license is supported with multihypervisor.
  F. You can migrate the license from a Cisco Nexus 1000V Switch for KVM to a Cisco Nexus 1000V Switch for VMware.
  B. An advanced edition license is required for each CPU socket on each VEM.
  D. The Cisco Nexus 1000 v switch supports Essential and Advanced license editions.
  F. You can migrate the license from a Cisco Nexus 1000V Switch for KVM to a Cisco Nexus 1000V Switch for VMware.