Cisco 300-615 Online Practice Questions and Exam Preparation

Cisco 300-615 Online Questions & Answers

• Question 211:

  Refer to the exhibit.

  

  An engineer troubleshoots the HSRP configuration and notes that the remote end uses HSRP version 1. The engineer sets the local HSRP to version 1, but the problem continues. Which action resolves the issue?

  A. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.
  B. Set the local group number as 300 in the remote data center configuration
  C. Run version 1 and version 2 HSRP on VLAN300 in the local data center.
  D. Reduce the priority of the local HSRP to below 100 to force the local HSRP to standby and then change the version to version 1.
  A. Change the local group number to 255 or less and request that the remote data center matches the group member in its configuration.

  ---

  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-16/fhp-xe-16-book/fhp-hsrp-v2.pdf

• Question 212:

  Refer to the exhibit.

  

  An engineer fails to install Perl in the guest shell on a Cisco Nexus 9000 Series Switch. Which two actions must be taken in the guest shell to resolve the issue? (Choose two.)

  A. Add the DNS server and suffix.
  B. Add a default gateway and nameserver.
  C. Install the unbound resolver package using curl.
  D. Configure domain-name and nameserver under the management VRF.
  E. Export the http_proxy and https_proxy environment variables.
  A. Add the DNS server and suffix.
  D. Configure domain-name and nameserver under the management VRF.

  ---

• Question 213:

  

  Refer to the exhibit. An engineer is configuring a VMM domain integration, but the operation fails to complete. Which two actions resolve the issue? (Choose two.)

  A. Configure the route from virtual machine manager OOB management network to vCenter.
  B. Use a different device package.
  C. Change VMware vCenter IP address.
  D. Change the VMware vCenter access credentials.
  E. Update the VMware vCenter version to be compatible with the Cisco ACI release.
  C. Change VMware vCenter IP address.
  D. Change the VMware vCenter access credentials.

  ---

• Question 214:

  Refer to the exhibit.

  

  An engineer experiences an issue presented with the Cisco UCS system. Which action resolves the issue?

  A. Change the discovery policy backplane speed preference to 4x10G.
  B. Reboot the blade server and acknowledge the fault.
  C. Update the I/O module firmware on the Cisco UCS chassis.
  D. Connect the adapter to the fabric interconnects using a breakout cable.
  A. Change the discovery policy backplane speed preference to 4x10G.

  ---

• Question 215:

  An upgrade of protected RPMs from the Bash shell does not take effect. Which action resolves this issue?

  A. Restart the Bash shell.
  B. Reload the switch.
  C. Upgrade the RPMs from the Guest shell.
  D. Disable and re enable the Bash feature.
  D. Disable and re enable the Bash feature.

  ---

• Question 216:

  DRAG DROP

  A firmware upgrade on a fabric interconnect fails. A bootflash contains a valid image. Drag and drop the recovery steps from the left onto the correct order on the right.

  Select and Place:

  

  

  ---

  Explanation/Reference:

• Question 217:

  A network engineer finds an error that says, "BIOS failed power-on self-test." When the engineer checks the console, they discover that the Cisco UCS Blade firmware upgrade process stopped at the "Configuring and testing memory" stage.

  Which set of actions resolves the issue?

  A. 1. Add the CIMC firmware on a server. 2. Initialize the CIMC firmware on a server.
  B. 1. Update the BIOS firmware on a server. 2. Activate the BIOS firmware on a server
  C. 1. Create a new host firmware package. 2. Assign the host firmware package to the service profile template.
  D. 1. Upgrade the firmware on an adapter. 2. Enable the firmware on an adapter.
  B. 1. Update the BIOS firmware on a server. 2. Activate the BIOS firmware on a server

  ---

• Question 218:

  An engineer troubleshoots FCoE on a Cisco MDS 9000 Series Switch. What does this output indicate about port channel 1?

  

  A. Port channel 1 is configured to connect to an NPIV switch.
  B. Port channel 1 is configured to be an ISL.
  C. Port channel 1 is configured to connect to an NPV switch.
  D. Port channel 1 is configured to connect to a host bus adapter.
  B. Port channel 1 is configured to be an ISL.

  ---

• Question 219:

  Refer to the exhibit.

  

  The administrator set up two pairs of Cisco Nexus switches. The administrator set dfferent vPC priorities on all four Nexus switches. As soon as the administrator activates the vPC between the two pairs the network faces different issues. The problems range from both Nexus pairs declare themselves as root bridge, as well as spanning-tree inconsistencies and traffic forwarding issues. Which action resolves these issues?

  A. Change the role priority on one pair.
  B. Configure peer-config-check-bypass on both pairs.
  C. Configure a vPC peer link between both peers.
  D. Change domain ID on one pair to a diferent ID.
  D. Change domain ID on one pair to a diferent ID.

  ---

• Question 220:

  An IOM fails during a firmware upgrade and is unresponsive. Which action recovers the module?

  A. Restore UCSM configuration from backup.
  B. Roll back to the previous firmware.
  C. Use AutoInstall to reinstall the firmware.
  D. From the peer IOM, reset the faulty module.
  B. Roll back to the previous firmware.

  ---