1. Home
  2. Cisco
  3. 300-615

Cisco 300-615 Online Practice Questions and Exam Preparation

300-615 Exam Details

  • Exam Code
    :300-615
  • Exam Name
    :Troubleshooting Cisco Data Center Infrastructure (DCIT)
  • Certification
    :CCNP Data Center
  • Vendor
    :Cisco
  • Total Questions
    :298 Q&As
  • Last Updated
    :Jul 15, 2026

Cisco 300-615 Online Questions & Answers

  • Question 231:

    Refer to the exhibit.

    The Cisco ACI fabric is configured with RADIUS realm as the default authentication method. The customer1_admin user is configured with the read-all role but still can create new objects in Tenant1. Which Cisco AV pair must be used to resolve the issue?

    A. shell:domains=customer1/read-all/, customer1//read-all
    B. shell:domains=customer1/access-admin/
    C. shell:domains=customer1//admin
    D. shell:domains=customer1/tenant-admin/

  • Question 232:

    A system administrator adds two vNICs to an existing service profile that is used to run a vSphere environment to support disjoint Layer 2 network connectivity. However, after the server is rebooted, the host is not accessible on the network Which action resolves the issue?

    A. Build a new service profile with the desired network configuration.
    B. Remove all existing vNICs and add them in the desired order.
    C. Create a vNIC placement policy to avoid adapter renumbering.
    D. Add the disjoint Layer 2 VLANs to an existing vNIC rather than adding new vNICs.

  • Question 233:

    Refer to the exhibit.

    The connection between a Cisco Nexus 5548UP switch and a Cisco MDS switch fails to initialize. What is the cause of the issue?

    A. VSAN 1 is suspended.
    B. The SFP is unsupported.
    C. Trunk mode must be activated.
    D. The interface is in an incorrect mode.

  • Question 234:

    Refer to the exhibit. This configuration has been applied:

    1.

    Eth1/5 and Eth1/7 as uplink ports and belong to port-channel 100

    2.

    Eth1/6 and Eth1/12 as uplink ports and belong to port-channel 200

    Two Cisco Nexus 9000 Series Switches, SW1 and SW2, fail to form a virtual port channel toward both fabric Two Cisco Nexus 9000 Series Switches, SW1 and SW2, fail to form a virtual port channel toward both fabric interconnect switches. Which set of ports must be allocated to which port channels to resolve the issue?

    A. Eth1/8 and Eth1/10 members of port-channel 100 Eth1/9 and Eth1/11 members of port-channel 200
    B. Eth1/7 and Eth1/12 members of port-channel 110 Eth1/5 and Eth1/6 members of port-channel 210
    C. Eth1/8 and Eth1/9 members of port-channel 200 Eth1/10 and Eth1/11 members of port-channel 100
    D. Eth1/12 and Eth1/6 members of port-channel 110 Eth1/5 and Eth1/7 members of port-channel 210

  • Question 235:

    Refer to the exhibit.

    An engineer performs a POST operation using REST API on the Cisco Nexus switch to retrieve a managed object, but the operation fails. Which configuration resolves the issue?

    A. https:/172.16.10.1/api/node/mo/uni/tn-Test1.xml?rsp-subtree=modified=config-only
    B. https://172.16.10.1/api/node/mo/uni/tn-Test1.xml?rsp-subtree=fullandrsp-prop-include=config-only
    C. icurl -k -v https:// 172.16.10.1/api/node/mo/uni/tn-Test1.xml?rsp-subtree=modified=config-only
    D. icurl -k -v https://172.16.10.1/api/mo/uni.xml?rsp-subtree=no

  • Question 236:

    Refer to the exhibit. An engineer implemented this fcdomain configuration on the MSD_1 and MDS_2 devices. However, after the engineer applies the configuration, this error is received. Which action resolves the issue?

    A. Increase the priority of MDS_1 to 20.
    B. Change the domain of MDS_1 to 20.
    C. Move MDS_2 to static VSAN 20.
    D. Restart fcdomain vsan 20 on MDS 2.

  • Question 237:

    Refer to the exhibit.

    Partial configuration from N9K-1 and N9K-2 is included. The client has two WANs connected.

    1.

    WAN-1 is for normal business-day activities.

    2.

    WAN-2 is for server backups during nonworking hours of 1:00 a.m. to 5:00 a.m. daily.

    The client says that at the scheduled time for backup, the data center server failed to use the WAN-2 link to back up the servers to the cloud backup system. What is the solution to this problem?

    A. The event timer must be written in epoch time format.
    B. The Cisco Nexus switch must be configured with one applet because a configuration with two applets will fail.
    C. The Cron entry must be configured without double quotes.
    D. The applet called "Backup" must include an action to remove the current static route.

  • Question 238:

    A maintenance operation on power rail A caused a reboot of the servers in a Cisco UCS B-Series chassis. The Cisco UCS system has these attributes:

    1.

    The system is equipped with four PSUs.

    2.

    N+1 mode is used.

    3.

    PSU 1 and 2 are connected to rail A.

    4.

    PSU 3 and 4 are connected to rail B.

    Which action prevents server reboot when rail A goes down?

    A. Use GRID mode do not change physical plugs.
    B. Configure nonredundant mode with PSU1 and 3 on A and PSU2 and 4 on
    C. Use N+2 mode; do not change physical plugs.
    D. Configure N+1 mode with PSU1 and 2 on and PSU3 and 4 on A.

  • Question 239:

    A vPC Type-1 inconsistency between two vPC peers in a VXLAN EVPN setup is discovered. Which two actions need to be attempted to resolve the issue? (Choose two.)

    A. Configure the NVE interfaces to be Up on both switches.
    B. Set a different distributed gateway virtual MAC address.
    C. Set a different secondary IP addresses on NVE source-interface.
    D. Configure the same VNI to multicast group maping.
    E. Set a different primary IP addresses on NVE source-interface.

  • Question 240:

    Refer to the exhibit.

    A new Cisco Nexus 5548 Switch connects to a network. SAN switching is configured on the switch. The switch fc2/10 NP uplink is shown in the exhibit. Which action ensures that fc2/10 is in an up state?

    A. Replace the SFP port module in fc2/10.
    B. Configure the admin port type E on the upstream switch that connects the port.
    C. Enable NPIV on the upstream switch that connects the port.
    D. Configure the BB_credit buffers on the upstream switch that connects the port.

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 300-615 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.