Cisco 300-101 Online Practice Questions and Exam Preparation

Cisco 300-101 Online Questions & Answers

• Question 841:

  A network engineer is troubleshooting connectivity issues with a directly connected RIPng neighbor. Which command shows directly connected RIPng neighbor adjacencies only?

  A. router# show ipv6 rip next-hops
  B. router# show ip rip neighbors
  C. router# show ipv6 routers
  D. router# show ipv6 rip database
  A. router# show ipv6 rip next-hops

• Question 842:

  Which feature can automatically assign IP addresses in a PPPoE environment?

  A. DHCP
  B. BOOTP
  C. PPP
  D. APPA
  C. PPP

• Question 843:

  Which two options are benefits of BGP peer groups?(Choose two)

  A. A Configuration change can be applied simultaneously to all peers in the peer group
  B. They cam optimize backbone routers
  C. They can be updated via multicast
  D. Each neighbor in a peer group can have different inbound BGP policies
  E. The use soft update to minimize bandwidth consumption
  F. They support groups of paths
  A. A Configuration change can be applied simultaneously to all peers in the peer group
  D. Each neighbor in a peer group can have different inbound BGP policies

• Question 844:

  Which OSPF network type uses a DR?

  A. Nonbroadcast multi-access
  B. point-to-multipoint
  C. point-to-point
  D. point-to-point nonbroadcast
  A. Nonbroadcast multi-access

• Question 845:

  Which two types of traffic can benefit from LLQ? (Choose two.)

  A. email
  B. voice
  C. telnet
  D. video
  E. file transfer
  B. voice
  D. video

• Question 846:

  An IPv6 overlay tunnel is required to communicate with isolated IPv6 networks across an IPv4 infrastructure. There are currently five IPv6 overlay tunnel types. Which three IPv6 overlay tunnel statements are true? (Choose three)

  A. Overlay tunnels can only be configured between border routers capable of supporting IPv4 and IPv6.
  B. Overlay tunnels can be configured between border routers or between a border router and a host capable of supporting IPv4 and IPv6.
  C. Cisco IOS supports manual, generic, routing encapsulation (GRE), IPv6-compatible, 4to6, and multiprotocol Label Switching (MPLS) Overlay tunneling mechanism.
  D. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4-compatible, 6to4, and IntraSite Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechanisms.
  E. A manual overlay tunnel supports point-to-multipoint tunnels capable of carrying IPv6 and Connectionless Network Service (CLNS) packets.
  F. Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.
  B. Overlay tunnels can be configured between border routers or between a border router and a host capable of supporting IPv4 and IPv6.
  D. Cisco IOS supports manual, generic routing encapsulation (GRE), IPv4-compatible, 6to4, and IntraSite Automatic Tunnel Addressing Protocol (ISATAP) overlay tunneling mechanisms.
  F. Overlay tunneling encapsulates IPv6 packets in IPv4 packets for delivery across an IPv4 infrastructure.

• Question 847:

  Which IPV6 address type does RIPng use for next-hop addresses?

  A. anycast
  B. global
  C. multicast
  D. site-local
  E. link-local
  E. link-local

• Question 848:

  Which command denies the default route?

  A. ip prefix-list deny-route seq 5 deny 0.0.0.0/32
  B. ip prefix-list deny-route seq 5 deny 0.0.0.0/8
  C. ip prefix-list deny-route seq 5 deny 0 0 0.0/0
  D. ip prefix-list deny-route seq 5 deny 0.0.0.0/16
  C. ip prefix-list deny-route seq 5 deny 0 0 0.0/0

• Question 849:

  Which two statements about 6to4 tunneling are accurate? (Choose two)

  A. Prepending a reserved IPv6 code to the hexadecimal representation of 192.168.0.1 facilitates 6to4 tunneling.
  B. Each 6to4 site receives a /48 prefix in a 6to4 tunnel.
  C. 2002::/48 is the address range specifically assigned to 6to4.
  D. Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4 tunneling.
  E. 6to4 is a manual tunnel method.
  B. Each 6to4 site receives a /48 prefix in a 6to4 tunnel.
  D. Prepending 0x2002 with the IPv4 address creates an IPv6 address that is used in 6to4 tunneling.

• Question 850:

  Which option is a prerequisite for stateful NAT64?

  A. IPsec for IPv6
  B. DNS64
  C. Application Layer Gateway
  D. ICMP64
  B. DNS64