Cisco 300-101 Online Practice Questions and Exam Preparation

Cisco 300-101 Online Questions & Answers

• Question 831:

  What command allows permit or deny IPv6 traffic?

  A. traffic-filter access-list-name
  B. access-list
  C. access-list ipv6
  D. access-group
  A. traffic-filter access-list-name

• Question 832:

  Option invalid redistribute from EIGRP into OSPF

  A. ACL
  B. tag
  C. metric
  D. route map
  A. ACL

• Question 833:

  Which two commands do you need to implement on a router to support the pppoe client? (Choose Two)

  A. peer default ipaddress pool
  B. mtu
  C. bba-group pppoe
  D. pppoe enable group
  E. pppoe-clientdialer-pool-number
  B. mtu
  E. pppoe-clientdialer-pool-number

• Question 834:

  Refer to the following access list.

  access-list 100 permit ip any any log

  After applying the access list on a Cisco router, the network engineer notices that the router CPU utilization has risen to 99 percent. What is the reason for this?

  A. A packet that matches access-list with the "log" keyword is Cisco Express Forwarding switched
  B. A packet that matches access-list with the "log" keyword is fast switched.
  C. A packet that matches access-list with the "log" keyword is process switched.
  D. A large amount of IP traffic is being permitted on the router.
  C. A packet that matches access-list with the "log" keyword is process switched.

• Question 835:

  Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?

  A. ip access-list extended 200 deny tcp host 10.10.10.1 eq 80 any permit ip any any
  B. ip access-list extended 10 deny tcp host 10.10.10.1 any eq 80 permit ip any any
  C. ip access-list extended NO_HTTP deny tcp host 10.10.10.1 any eq 80
  D. ip access-list extended 100 deny tcp host 10.10.10.1 any eq 80 permit ip any any
  D. ip access-list extended 100 deny tcp host 10.10.10.1 any eq 80 permit ip any any

• Question 836:

  Which criterion does the BGP maximum paths feature use for load balancing?

  A. MED
  B. local preference
  C. weight
  D. router ID
  C. weight

• Question 837:

  Congestion in the network. What is the effect on UDP?

  A. Sender will have to buffer more data.
  B. Receiver will have to buffer more data before sending packets to higher layers
  C. There will be latency.
  C. There will be latency.

• Question 838:

  A network engineer wants to verify the status of a recently configured NTP setup on one of the routers. The engineer executes the show ntp associations command. What does the output indicate?

  A. the synchronized NTP servers that are configured on the device.
  B. the authentication mode that is used with the NTP server.
  C. the security key value for the configured NTP server.
  D. the facility that is configured for the NTP server.
  A. the synchronized NTP servers that are configured on the device.

• Question 839:

  Refer to Exhibit, which statement about the configuration on the Cisco router is true?

  

  A. The router sends only NTP traffic, using the loopback interface, and it disables eth0/0 from sending NTP traffic.
  B. Eth0/0 sends NTP traffic on behalf of the loopback interface
  C. The router sends only NTP traffic, using the eth0/0 interface, and it disables loopback0 from sending NTP traffic.
  D. The router never sends NTP traffic, as using the loopback interface for NTP traffic is not supported on IOS routers.
  A. The router sends only NTP traffic, using the loopback interface, and it disables eth0/0 from sending NTP traffic.

• Question 840:

  What does the number 16 in the following command represent? Router(config)#snmp-server user abed public v2c access 16

  A. the mask of the files that are allowed to use community string public
  B. the standard named access list 16, which contains the access rules that apply to user abed.
  C. the number of concurrent users who are allowed to query the SNMP community
  D. the user ID that is allowed to use the community string public
  B. the standard named access list 16, which contains the access rules that apply to user abed.