Cisco 300-101 Online Practice Questions and Exam Preparation

Cisco 300-101 Online Questions & Answers

• Question 661:

  Refer to the exhibit. Which interoperability technique implemented on the dual-stack routers would allow connectivity between IPv6 sites across automatic created tunnels using the 2002::/16 prefix?

  

  A. Dual Stack
  B. NAT-PT
  C. 6to4 tunnel
  D. GRE tunnel
  E. ISATAP tunnel
  C. 6to4 tunnel

• Question 662:

  A network administrator is troubleshooting a DMVPN setup between the hub and the spoke. Which action should the administrator take before troubleshooting the IPsec configuration?

  A. Verify the GRE tunnels
  B. Verify ISAKMP
  C. Verify NHRP
  D. Verify crypto maps.
  A. Verify the GRE tunnels

• Question 663:

  

  A network engineer is working on the network topology and executes the command no ip split- horizon on interface S0/0 of the hum router. What is the result of this command?

  A. A routing loop is created.
  B. Each of the spoke routers can see the routes that are advertised from the other spoke routers
  C. The Spoke routers can see the routes that are advertised by the hub router
  D. The hub router can see the routes that are advertised by the spoke routers
  B. Each of the spoke routers can see the routes that are advertised from the other spoke routers

• Question 664:

  A network engineer initiates the ip sla responder tcp-connect command in order to gather statistics for performance gauging. Which type of statistics does the engineer see?

  A. connectionless-oriented
  B. service-oriented
  C. connection-oriented
  D. application-oriented
  C. connection-oriented

• Question 665:

  Refer to the exhibit

  

  How does R1 handle the route to netowk 10.1.80.0.0/24?

  A. R1 redistributes network 10.1.80.0/24 into EIGRP without changing the mask
  B. R1 changes the mask to /32 and then redistributes network 10.1.80.0/24 into EIGRP as a classful network
  C. R1 changes the mask to /32 and then redistributes network 10.1.80.0/24 into EIGRP as a classless network
  D. R1 changes the mask to /32 and then redistributes network 10.1.80.0/24 into EIGRP as a classless network
  A. R1 redistributes network 10.1.80.0/24 into EIGRP without changing the mask

• Question 666:

  A network engineer wants to baseline the network to determine suitablilty for real-time voice applications.Which IP SLA operation is best suited for this task?

  A. udp-jitter
  B. tcp-jitter
  C. ip sla logging traps
  D. ip sla reaction-configuration
  A. udp-jitter

• Question 667:

  You have implemented mutual route redistribution between OSPF and EIGRP on a border router. When checking the routing table on one of the OSPF routers within the OSPF routing domain, you are seeing some, but not all of the expected routes. Which two things should you verify to troubleshoot this problem? (Choose two.)

  A. The border router is using a proper seed metric for OSPF.
  B. The border router is using a proper seed metric for EIGRP.
  C. The administrative distance is set for OSPF and EIGRP
  D. The missing EIGRP routes are present in the routing table of the border router
  E. The subnet keyword on the border router in the redistribute EIGRP command
  D. The missing EIGRP routes are present in the routing table of the border router
  E. The subnet keyword on the border router in the redistribute EIGRP command

• Question 668:

  To enable BGP tunneling over an IPv4 backbone, the IPv4 address 192.168.30.1 is converted into a valid IPv6 address. Which three IPv6 addresses are acceptable formats for the IPv4 address? (Choose three.)

  A. 192.168.30.1:0:0:0:0:0:0
  B. 0:0:0:0:0:0:192.168.30.1
  C. ::192.168.30.1
  D. C0A8:1E01::
  E. 192.168.30.1::
  F. ::C0A8:1E01
  B. 0:0:0:0:0:0:192.168.30.1
  C. ::192.168.30.1
  F. ::C0A8:1E01

• Question 669:

  A router in an EVN environment is choosing a route. Which value is given the highest selection priority?

  A. IGP administrative distance of the route
  B. Replication status of the route
  C. VNET tag of the route
  D. Default administrative distance of a route
  E. Lexical value of the source VRF name
  A. IGP administrative distance of the route

• Question 670:

  Which command must you configure globally to support RIPng?

  A. ip routing
  B. ip cef
  C. ipv6 enable
  D. ipv6 unicast-routing
  D. ipv6 unicast-routing