Cisco 300-101 Online Practice Questions and Exam Preparation

Cisco 300-101 Online Questions & Answers

• Question 381:

  Which option is the minimum privilege level that the allows the user to execute all user-level commands but prohibits enable-level commands by default?

  A. Level 1
  B. Level 0
  C. Level 14
  D. Level 15
  A. Level 1

• Question 382:

  A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C.

  

  Which configuration on Router B will achieve the desired effect?

  A. access-list 1 permit 172.16.10.0 0.0.0.255 interface S0 ip policy route-map policy route-map policy permit 10 match ip address 1 set ip next-hop 172.16.12.3
  B. access-list 1 permit 172.16.10.0 0.0.0.255 interface E0 ip policy route-map policy route-map policy permit 10 match ip address 1 set ip next-hop 172.16.12.2
  C. access-list 1 permit 172.16.10.0 0.0.0.255 !interface E0 ip policy route-map policy route-map policy permit 10 match ip address 1 set ip next-hop 172.16.14.4
  D. access-list 1 deny 172.16.10.0 0.0.0.255 interface S0 ip policy route-map policy route-map policy permit 10 match ip address 1 set ip next-hop 172.16.12.2
  A. access-list 1 permit 172.16.10.0 0.0.0.255 interface S0 ip policy route-map policy route-map policy permit 10 match ip address 1 set ip next-hop 172.16.12.3

• Question 383:

  Refer to the exhibit.

  

  Which two statements are correct regarding the routes to be redistributed into OSPF? (Choose two)

  A. The network 192.168.1.0 will be allowed and assigned a metric of 100.
  B. The network 192.168.1.0 will be allowed and assigned a metric of 200.
  C. All networks except 10.0.0.0/8 will be allowed and assigned a metric of 200.
  D. The network 172.16.0.0/16 will be allowed and assigned a metric of 200.
  E. The network 10.0.10.0/24 will be allowed and assigned a metric of 200.
  A. The network 192.168.1.0 will be allowed and assigned a metric of 100.
  D. The network 172.16.0.0/16 will be allowed and assigned a metric of 200.

• Question 384:

  An engineer has configured a router to use EUI-64, and was asked to document the IPv6 address of the router. The router has the following interface parameters:

  mac address 2201.420A.0004 subnet 2001:DB8:0:1::/64

  Which IPv6 addresses should the engineer add to the documentation?

  A. 2001:DB8:0:1:01:42AF:FE0F:4
  B. 2001:DB8:0:1:FFFF:2201:420F:4
  C. 2001:DB8:0:1:FE80:2201:420F:4
  D. 2001:DB8:0:1:C601:42AE:800F:4
  A. 2001:DB8:0:1:01:42AF:FE0F:4

• Question 385:

  DRAG DROP

  Drag and drop the statements about NAT64 from the left onto the correct NAT64 types on the right

  Select and Place:

  

  

• Question 386:

  When unicast reverse path forwarding is configured on an interface, which action does the interface take first when it receives a packet?

  A. It verifies that the source has a valid CEF adjacency.
  B. It checks the egress access lists.
  C. It verifies a reverse path via the FIB to the source.
  D. It checks the ingress access lists.
  C. It verifies a reverse path via the FIB to the source.

• Question 387:

  Under which condition does UDP dominance occur?

  A. when TCP traffic is in the same class as UDP
  B. when UDP flows are assigned a lower priority queue
  C. when WRED is enabled
  D. when ACLs are in place to block TCP traffic
  A. when TCP traffic is in the same class as UDP

• Question 388:

  After a recent DoS attack on a network, senior management asks you to implement better logging functionality on all IOS-based devices. Which two actions can you take to provide enhanced logging results? (Choose two.)

  A. Use the msec option to enable service time stamps.
  B. Increase the logging history
  C. Set the logging severity level to 1.
  D. Specify a logging rate limit.
  E. Disable event logging on all noncritical items
  A. Use the msec option to enable service time stamps.
  B. Increase the logging history

• Question 389:

  Which SNMP version provides both encryption and authentication?

  A. SNMPv4
  B. SNMPv2c
  C. SNMPv3
  D. SNMPv1
  C. SNMPv3

• Question 390:

  Refer to the exhibit.

  

  Which command only announces the 1.2.3.0/24 network out of FastEthernet 0/0?

  A. distribute list 1 out
  B. distribute list 1 out FastEthernet0/0
  C. distribute list 2 out
  D. distribute list 2 out FastEthernet0/0
  D. distribute list 2 out FastEthernet0/0