Cisco 200-601 Online Practice Questions and Exam Preparation

Cisco 200-601 Online Questions & Answers

• Question 1:

  Which is an issue with running CIP Motion on a REP network and identifies an alternate resiliency protocol that works for CIP Motion?

  A. CIP Motion requires a star topology which is not supported by REP. DLR is a suitable resiliency protocol for CIP motion.
  B. REP convergence is not fast enough. DLR is a suitable resiliency protocol for CIP motion.
  C. CIP Motion requires a star topology which is not supported by REP. RPVST+ is a suitable resiliency protocol for CIP motion.
  D. REP convergence is not fast enough. RPVST+ is a suitable resiliency protocol for CIP motion.
  B. REP convergence is not fast enough. DLR is a suitable resiliency protocol for CIP motion.

• Question 2:

  What are the two most relevant factors in determining the class of administration that is required to maintain the telecommunications infrastructure? (Choose two.)

  A. the size of the infrastructure
  B. the complexity of the infrastructure
  C. the age of the infrastructure
  D. the industry that the infrastructure supports
  E. the physical environment of the infrastructure
  A. the size of the infrastructure
  B. the complexity of the infrastructure

• Question 3:

  A cookie cutter machine requires 2 standard controllers and a safety controller. All of these controllers and machine level I/O have been placed on VLAN 104. The safety controller must monitor an emergency stop connected to an I/O adapter on an adjacent machine (VLAN 105). Which packet type will be used?

  A. UDP Multicast TTL = 1
  B. UDP Multicast TTL = 2
  C. UDP Unicast
  D. TCP Unicast
  C. UDP Unicast

• Question 4:

  What security component can be deployed to increase the defense in depth and specifically can be positioned against 'man-in-the-middle' attack?

  A. Deploy 802.1AE
  B. Deploy 802.1X
  C. Deploy 802.1Q
  D. Deploy 802.1AX
  A. Deploy 802.1AE

• Question 5:

  A ProfiNET management system operator is unable to add a ProfiNET Conformance Class B device to a SIMATIC management station. The device is connected to interface FastEthernet1/3. Based on the provided CLI output, which statement is correct?

  switch#show profinet lldp Fa1/1 port-003-00000 On Fa1/2 port-004-00000 On Fa1/3 port-005-00000 Off Fa1/4 port-006-00000 Off Fa1/5 port-007-00000 On Fa1/6 port-008-00000 Off Fa1/7 port-009-00000 On Fa1/8 port-010-00000 Off

  A. LLDP has been disabled on this switch
  B. The connected device is not sending LLDP packets with ProfiNET extensions
  C. The port label needs to be changed on interface FastEthernet 1/3 to "port-003-00000"
  D. ProfiNET is disabled on this switch
  B. The connected device is not sending LLDP packets with ProfiNET extensions

• Question 6:

  Which in-depth approach is used when deploying defense in an industrial zone?

  A. Use PLCs and control systems from multiple vendors in such a way that the process will become resilient for failures of one vendor.
  B. Deploy two factor authentications for all operators which need to login remote while working from home.
  C. Collect log files at a central location for easy back-up and encryption to provide privacy.
  D. Create multiple zones in the industrial zone and protect / inspect traffic between the zones with firewalls and intrusion monitors.
  D. Create multiple zones in the industrial zone and protect / inspect traffic between the zones with firewalls and intrusion monitors.

• Question 7:

  Which best describes the difference between 802.11n and 802.11ac?

  A. 802.11ac offers more channels over more bands than 802.11n
  B. 802.11ac MCS 1 is about twice as fast as 802.11n MCS1
  C. 802.11ac offers more modulation schemes than 802.11n
  D. 802.11ac 1SS MCS 9 is allowed over a 20, 40, 80 and 160 MHz channel, while 802.11n 1SS MCS 9 is only allowed over a 20 or 40 MHz channel.
  C. 802.11ac offers more modulation schemes than 802.11n

• Question 8:

  What is the reason that ProfiNET frames are discarded by default on Catalyst switches?

  A. ProfiNET uses a nonstandard Ethernet frame format
  B. The frames have an 802.1q tag with VLAN ID equal to 0 (zero)
  C. Catalyst switches do not support ProfiNET traffic
  D. A ProfiNET VLAN must be configured and enabled on a Catalyst switch
  B. The frames have an 802.1q tag with VLAN ID equal to 0 (zero)

• Question 9:

  Which describes the relationship between a workgroup bridge?

  A. Wired clients of a workgroup bridge can communicate, through the workgroup bridge, with wireless clients of an autonomous or a controller-based access point
  B. Wireless clients of a controller-based AP can communicate, through the workgroup bridge, with wireless clients of an autonomous access point
  C. Wireless clients of an autonomous access point can communicate with wired clients of a workgroup bridge, but Wireless clients of a controller-based access point cannot communicate with wired clients of a workgroup bridge
  D. Wireless clients of a controller-based access point can communicate with wired clients of a workgroup bridge, but Wireless clients of an autonomous access point cannot communicate with wired clients of a workgroup bridge
  A. Wired clients of a workgroup bridge can communicate, through the workgroup bridge, with wireless clients of an autonomous or a controller-based access point

• Question 10:

  Your controller has a high performance EtherNet/IP interface with port speed of >30,000 packets per second and 80% spare capacity. A new PowerFlex 753 drive will be added to the system with an RPI of 2ms and has been connected to a switch; you have been asked to set up the switch port. You open the EDS file and see that the drive will support 16 CIP connections and has transmit and receive capacity of 1,000 control packets per second. What do you set as the storm control pps threshold limit for the port?

  A. 16
  B. 1,000
  C. 2,500
  D. 25,000
  C. 2,500