1. Home
  2. Cisco
  3. 200-301

Cisco 200-301 Online Practice Questions and Exam Preparation

200-301 Exam Details

  • Exam Code
    :200-301
  • Exam Name
    :Implementing and Administering Cisco Solutions (200-301 CCNA) v1.1
  • Certification
    :CCNA
  • Vendor
    :Cisco
  • Total Questions
    :1716 Q&As
  • Last Updated
    :May 24, 2026

Cisco 200-301 Online Questions & Answers

  • Question 101:

    DRAG DROP

    Drag and drop the functions from the left onto the correct network components on the right.

    Select and Place:

  • Question 102:

    A Cisco engineer is configuring a factory-default router with these three passwords:

    1. The user EXEC password for console access is p4ssw0rd1.
    2. The user EXEC password for Telnet access is s3cr3t2.
    3. The password for privileged EXEC mode is priv4t3p4ss.

    Which command sequence must the engineer configure?

    A. enable secret priv4t3p4ss ! line con 0 password p4ssw0rd1 ! line vty 0 15 password s3cr3t2
    B. enable secret priv4t3p4ss ! line con 0 password p4ssw0rd1 login ! line vty 0 15 password s3cr3t2 login
    C. enable secret priv4t3p4ss ! line con 0 password login p4ssw0rd1 ! line vty 0 15 password login s3cr3t2 login
    D. enable secret privilege 15 priv4t3p4ss ! line con 0 password p4ssw0rd1 login ! line vty 0 15 password s3cr3t2 login The correct command sequence is: enable secret priv4t3p4ss line con 0 password p4ssw0rd1 login line vty 0 15 password s3cr3t2 login

  • Question 103:

    What is the difference between 1000BASE-LX/LH and 1000BASE-ZX interfaces?

    A. 1000BASE-ZX is supported on links up to 1000km, and 1000BASE-LX/LH operates over links up to 70 km.
    B. 1000BASE-LX/LH interoperates with multimode and single-mode fiber, and 10008ASE- ZX needs a conditioning patch cable with a multimode.
    C. 1000BASE-LX/LH is supported on links up to 10km, and 1000BASE-ZX operates over links up to 70 km
    D. 1000BASE-ZX interoperates with dual-rate 100M/1G 10Km SFP over multimode fiber, and 1000BASE-LX/LH supports only single-rate.

  • Question 104:

    Which QoS feature drops traffic that exceeds the committed access rate?

    A. policing
    B. FIFO
    C. shaping
    D. weighted fair queuing

  • Question 105:

    Which action implements physical access control as part of the security program of an organization?

    A. configuring a password for the console port
    B. backing up syslogs at a remote location
    C. configuring enable passwords on network devices
    D. setting up IP cameras to monitor key infrastructure

  • Question 106:

    Refer to the exhibit.

    Which per-hop QoS behavior is R1 applying to incoming packets?

    A. marking
    B. shaping
    C. queuing
    D. policing

  • Question 107:

    Refer to the exhibit.

    Two new switches are being installed. The remote monitoring team uses the support network to monitor both switches. Which configuration is the next step to establish a Layer 2 connection between the two PCs?

    A. SwitchA(config)#interface GigabitEthernet0/1 SwitchA(config-if)#switchport access vlan 500 SwitchB(config)#interface GigabitEthernet0/1 SwitchB(config-if)#switchport access vlan 500
    B. SwitchA(config)#interface GigabitEthernet0/1 SwitchA(config-if)#switchport mode trunk SwitchB(config)#interface GigabitEthernet0/1 SwitchB(config-if)#switchport mode trunk
    C. SwitchA(config)#interface GigabitEthernet0/0 SwitchA(config-if)#switchport trunk allowed vlan 500,550 SwitchB(config)#interface GigabitEthernet0/0 SwitchB(config-if)#switchport trunk allowed vlan 500,550
    D. SwitchA(config)#interface GigabitEthernet0/0 SwitchA(config-if)#spanning-tree portfast SwitchA(config-if)#spanning-tree bpduguard enable SwitchB(config)#interface GigabitEthernet0/0 SwitchB(config-if)#spanning-tree portfast SwitchB(config-if)#spanning-tree bpduguard enable

  • Question 108:

    Why would a network administrator choose to implement RFC 1918 address space?

    A. to route traffic on the internet
    B. to provide flexibility in the IP network design
    C. to provide overlapping address space with another network
    D. to limit the number of hosts on the network

  • Question 109:

    Refer to the exhibit. Which router or router group are NTP clients?

    A. R1
    B. R2 and R3
    C. R1, R3, and R4
    D. R1, R2, and R3

  • Question 110:

    DRAG DROP

    Drag and drop the wireless standards from the left onto the number of nonoverlapping channels they support on the right.

    Select and Place:

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 200-301 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.