Cisco 100-105 Online Practice Questions and Exam Preparation

Cisco 100-105 Online Questions & Answers

• Question 721:

  To what type of port would a cable with a DB-60 connector attach?

  A. Serial port
  B. Console port
  C. Ethernet port
  D. Fibre optic port
  A. Serial port

• Question 722:

  You attempt to ping a remote device by name from a PC, and the ping operation fails and returns the error message "Ping request could not find host." You verify that the router DHCP pool is configured with a name server. What are two possible reasons for the problem? (Choose two.)

  A. The DNS server is not reachable.
  B. The PC network interface card device driver is missing.
  C. The host that must be resolved does not exist.
  D. The subnet mask of the DHCP pool is incorrect.
  E. The DHCP server cannot provide an address to the PC.
  A. The DNS server is not reachable.
  C. The host that must be resolved does not exist.

• Question 723:

  Which routing protocol has the smallest default administrative distance?

  A. IBGP
  B. OSPF
  C. IS-IS
  D. EIGRP
  E. RIP
  D. EIGRP

• Question 724:

  Which value must the device send as its username when using CHAP to authenticate with the remote peer site id: XXXXXXXX over a PPP link?

  A. The automatically generated user name
  B. The local host name
  C. The user name defined by the administrator
  D. The host name of the remote device.
  B. The local host name

• Question 725:

  What are three parts of an IPv6 global unicast address? (Choose three.)

  A. an interface ID that is used to identify the local host on the network
  B. an interface ID that is used to identify the local network for a particular host.
  C. a subnet ID that is used to identify networks inside of the local enterprise site
  D. a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP
  E. a global routing prefix that is used to identify the portion of the network address provided by a local administrator
  A. an interface ID that is used to identify the local host on the network
  C. a subnet ID that is used to identify networks inside of the local enterprise site
  D. a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP

• Question 726:

  What is the default configuration of a Cisco switch?

  A. No default gateway assigned
  B. System name is Cisco
  A. No default gateway assigned

• Question 727:

  DRAG DROP

  Drag and drop the router DHCP configuration steps from the left into the Cisco-recommended sequence on the right.

  Select and Place:

  

  

• Question 728:

  Which purpose of a floating static route is true?

  A. It disables dynamic routing.
  B. It supersedes the route that is installed in the routing table.
  C. It improves resiliency when an interface goes down.
  D. It is used in the absence of a default route.
  C. It improves resiliency when an interface goes down.

• Question 729:

  Which command displays the number of times that an individual router translated an inside address to an outside address?

  A. show ip protocol
  B. show ip nat translation
  C. show counters
  D. show ip route
  E. show ip nat statistics
  E. show ip nat statistics

• Question 730:

  Which characteristics are representative of a link-state routing protocol? (Choose three.)

  A. provides common view of entire topology
  B. exchanges routing tables with neighbors
  C. calculates shortest path
  D. utilizes event-triggered updates
  E. utilizes frequent periodic updates
  A. provides common view of entire topology
  C. calculates shortest path
  D. utilizes event-triggered updates