NetApp NS0-182 Online Practice Questions and Exam Preparation

NetApp NS0-182 Online Questions & Answers

• Question 61:

  You finished an ONTAP 9.5 installation using the information provided by the customer, but the NFS exports and CIFS shares cannot be accessed using the newly created data LIFs. In this situation, which action should you perform before you leave the customer's site?

  A. Advise the customer to but Cisco switches because NetApp supports only Cisco switches for CIFS and NFS.
  B. Review the ONTAP network configuration with the customer and make sure that it is correct.
  C. Connect to the customer's switch infrastructure and reset the port configurations.
  D. Advise the customer to solve the issue on their own, this is not part of a basic installation.
  B. Review the ONTAP network configuration with the customer and make sure that it is correct.

• Question 62:

  After completing an installation, the customer wants to know how they can manually open a new technical case with NetApp Global Support. What are three ways to accomplish this task? (Choose three.)

  A. Use the support site.
  B. Use the NetApp Field Portal.
  C. Use the mobile app.
  D. Use a telephone.
  E. Use AutoSupport.
  A. Use the support site.
  C. Use the mobile app.
  E. Use AutoSupport.

• Question 63:

  What are two ways to obtain customer licenses for a new ONTAP system? (Choose two.)

  A. Access the NetApp Support site.
  B. Open a support ticket.
  C. Access the Field Portal site.
  D. Access NetApp Knowledge Base.
  A. Access the NetApp Support site.
  B. Open a support ticket.

• Question 64:

  When planning the installation of a new ONTAP 9.5 cluster for a customer, which three steps should you perform? (Choose three.)

  A. Complete a Service Event Report.
  B. Use Config Builder to create a configuration spreadsheet.
  C. Review the hardware components in Hardware Universe.
  D. Open a support case to prepare for the installation.
  E. Search for Technical Support bulletins for the hardware.
  A. Complete a Service Event Report.
  B. Use Config Builder to create a configuration spreadsheet.
  C. Review the hardware components in Hardware Universe.

• Question 65:

  You are given a standard license key for NFS.

  In which scenario would this standard licensed be used?

  A. The licensed is locked to a node with a specific serial number
  B. The license will be available for any node in the cluster.
  C. The license will be available for use on an HA pair for use.
  D. The license is locked to a cluster with a specific serial number.
  A. The licensed is locked to a node with a specific serial number

• Question 66:

  You have a 2-node switchless cluster named clusterA. You are planning on adding two additional nodes to clusterA. What must you consider before you add the addiHonal nodes to clusterA?

  A. Convert clusterA to a switched cluster by migrating the data lIFs from direct connect to die cluster interconnect switch.
  B. Convert clusterA to a single-node cluster.
  C. Convert clusterA to a switch** cluster by migrating the cluster LIFs from direct connect to the cluster interconnect switch.
  D. Use direct connect to add the additional nodes to clusterA.
  C. Convert clusterA to a switch** cluster by migrating the cluster LIFs from direct connect to the cluster interconnect switch.

• Question 67:

  While installing new Cisco cluster switches, you need to download the appropriate RCF to the switch.

  In this scenario, which two file transfer protocols would be used? (Choose two.)

  A. HTTP
  B. FTP
  C. SCP
  D. NFS
  A. HTTP
  B. FTP

• Question 68:

  You have a 2-node switchless cluster in a remote location. Node1 has taken over node 2. You want to access node 2 to investigate the problem. In this scenario, how would you contact node 2 from a remote location?

  A. Use SSH to access the Service Processor on node 2.
  B. Use telnet to access the Service Processor IP on node 2.
  C. Use SSH to access the node management IP on node 1.
  D. Use SSH to access the node management IP on node 2.
  A. Use SSH to access the Service Processor on node 2.

• Question 69:

  You install a new AFF A300 2-node switchless cluster with ONTAP 9.5 at a customer site. Each node has a root aggregate as part of the system configuration. In this scenario, what is the default disk partitioning called?

  A. root-data-data partitioning
  B. data-data partitioning
  C. root-data partitioning
  D. root-data-root partitioning
  C. root-data partitioning

• Question 70:

  A customer has a standard request for information regarding the installation, configuration, usage, and maintenance of his NetApp equipment. What is the appropriate priority level to use when he opens a case?

  A. P2
  B. P1
  C. P4
  D. P3
  C. P4