Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 81:

  HOTSPOT

  A company manufactures light projection toys for holiday decorations, with a unique template produced for each toy. The company plans to adopt Lean manufacturing processes.

  The production master data must satisfy the following requirements:

  1. Templates for a specific holiday should only be included for in-store products sold in regions where that holiday is celebrated.

  2. Templates should also align with the appropriate season for in-store products.

  3. Online customers must have the ability to order specific toys for any holiday or region.

  You need to configure the production master data to meet these requirements.

  What settings should you configure? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 82:

  You need to resolve the issue for UserC.

  Which two options should you configure? Each correct answer presents a complete solution.

  A. Forward tracing
  B. Best advice period in days
  C. Best before period in days
  D. Backward tracing
  E. Shelf life period in days
  C. Best before period in days
  E. Shelf life period in days

  ---

  Explanation

  Scenario:

  * UserC learns that mixes containing BaseA have been stamped with a batch date from the flour vendor and is not being calculated from the mix manufacturing date. The mixes from the past month that might be impacted need to be identified and the calculation needs to be corrected.

  * BaseA and BaseB are made in large batches and stored until they are used in the other mixes.

  * Mixes with BaseA have a shelf life of six months due to the type of flour it uses.

  You can reset shelf life dates for an inventory batch.

  Use this procedure to reset the shelf life date for an inventory batch. The shelf life defines the effective period of a product as measured in days, months, or years. Reports and picking strategies for products are determined based on the shelf life of a particular lot by using FIFO (First In, First Out) rules.

  Click Inventory management > Inquiries > Dimensions > Batches.

  Select the inventory batch to update.

  Click Reset shelf life dates.

  In the Reset shelf life dates form, select a new date in the date field that you want to change.

  Manufacturing date

  Shelf advice date Select the recommended date when a batch or lot should be retested to validate that it still meets testing standards.

  Best before date Select the date before an inventory batch is best used. If you change the best before date, you are asked whether to recalculate the expiration date.

  Note: In the Shelf life period in days field, enter the number of days that are added to the batch date of the item to determine the expiration date of the item.

  https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/reset-shelf-life-dates-for-an-inventory-batch

  https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/set-up-an-item-as-a-shelf-life-item

• Question 83:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen

  A manufacturing plant uses Lean process. You plan to outsource a painting operation to a subcontracting vendor. You create a service item named SP-01 to represent the painting service.

  You need to create a subcontracting activity for the painting service.

  Solution:

  1. Create a purchase agreement for the subcontracting vendor that contains the pricing information for SP-01

  2. Create a vendor resource and a work cell for outsourced painting, then add the resource to the work cell

  3. Create a production flow process activity using the painting work cell and the service item as the picking activity

  4. Create a service term on the activity to tie the purchase agreement to the activity

  Does this solution meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  Explanation

  References:

  https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/activity-based-subcontracting

• Question 84:

  DRAG DROP

  A skateboard manufacturer uses route operations to schedule resources and estimate units per hour.

  All products use the same sub assembly item and resource sanding process.

  You observe an Increase in the number of units a sanding belt resource can produce.

  The production schedule is now inaccurate due to the number of units the sanding belt line can produce.

  You must make a permanent change to the number of units the resource can produce for all future orders.

  You need to adjust the process quantity on the route operation.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  
  

• Question 85:

  You are responsible for product and formula maintenance for a paint manufacturer.

  You create a formula for white paint and add its lines.

  When the formula size increases or an ingredient changes, the quantity of the pigment ingredient must be adjusted proportionately.

  You need to set up the formula line for the pigment.

  Which formula feature should you use?

  A. Pegged supply
  B. Step consumption
  C. Scalable
  D. Variable
  C. Scalable

  ---

  Explanation

  References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/formulas-versions#use-the-scalable-feature

• Question 86:

  HOTSPOT

  A company uses a make-to-stock strategy for their key production components.

  The number of active Kanban's for these components must be constant.

  You need to configure a new Kanban rule.

  How should you set up the Kanban type and replenishment strategy? To answer select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

  ---

  
  

• Question 87:

  A company plans to use master planning in Dynamics 365 Supply Cha-n Management. The company will sell items between legal entities.

  The company has several facilities across legal entities that can manufacture the same products- Some products are produced only in some plants. To meet product demand, when one facility rs over capacity, another facility is used to fulfill the downstream demand.

  The organizational entities are: Legal Entity A: Plant 1,2, and 3 Legal Entity B: Plant 4 and S Legal Entity C: Plant 6. 7. and 8

  The following plants must be planned together

  Plan1, Plant 3, and Plant 4

  Plant 2, Plant 6, and Plant 8

  Plant 5 and Plant 7

  You need to configure master planning for the facilities.

  Which configuration mechanism should you use?

  A. Intercompany planning groups
  B. Coverage groups
  C. Item model groups
  D. Production groups
  A. Intercompany planning groups

• Question 88:

  A vendor plans to supply replacements for a product that they manufactured.

  The cost associated with manufacturing most components of the replacement product differ from costs associated with the original product.

  You need to plan for the new cost of the item in determining the sales price.

  Which costing version explosion mode should you use?

  A. According to BOM line type
  B. Multilevel
  C. Single level
  D. Make to Order
  B. Multilevel

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/simulate-cost-changes-costing-version-planned-costs

• Question 89:

  DRAG DROP

  A beverage manufacturing company is implementing Dynamics 365 Supply Chain Management.

  The company will use the batch balancing functionality to create the beverages.

  1. IngredientA must be configured for a target value of 40 with a minimum of 35 and a maximum of 45.
  2. IngredientB must be configured to account for target value variances.

  You need to configure the ingredient-based calculations

  Which ingredient type should you configure for each requirement?

  To answer, drag the appropriate ingredient types to the correct requirements. Each ingredient type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  Select and Place:

  

  

  ---

  
  

• Question 90:

  HOTSPOT

  A customer produces light projection toys for holiday decorations throughout the year. Because holidays vary by region and time of year, the company wants to implement Lean manufacturing.

  The production process creates the toys at the following work cell: stands, main assembly, electric, visuals, and packaging.

  You need to implement the production process.

  Which configuration options should you use? To answer, select the appropriate configuration options in the answer area.

  NOTE: Each correct selection is worth one point.