Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 101:

  You need to resolve the issue for UserB.

  What are two possible ways to achieve this goal? Each correct answer presents a complete solution.

  A. Set up configuration and weight for partial visibility.
  B. Set up configuration and weight for full visibility.
  C. Create a product master with predefined variants for ounces and boxes.
  D. Create a catch weight item.
  B. Set up configuration and weight for full visibility.
  D. Create a catch weight item.

  ---

  Explanation

  Mixes are generally stored and sold in 16-ounce bags. Some quantities are sold and distributed in 5, 10, and 20-gallon containers to large restaurants.

  B: Catch weight items that use full visibility require that the inventory quantity is known for each catch weight unit. For example, assume shrimps are sold in boxes and the customer requires that each box must have a unique identification and a known weight. In this example, the item number for the boxes of shrimps should be created as a catch weight item that uses full visibility. You create catch weight items that use full visibility if you assign a unique serial number to each catch weight unit.

  D: You often use catch weight products in industries where products can vary slightly by weight or size, or both, such as the food industry. Catch weight products use two units of measure ?an inventory unit and a catch weight unit. The inventory unit is the unit of measure in which the product is weighed and invoiced. The catch weight unit is the unit in which the inventory transactions are performed, such as sold, received, transferred, picked, and shipped. The nominal quantity represents the conversion between the catch weight unit and the inventory unit. Minimum and maximum quantities represent the allowed interval in which the inventory quantity can vary

  Incorrect:

  Not A: Catch weight items that use partial visibility require that the inventory quantity is known for batches of items that use a catch weight unit. For example, assume that a company receives a batch of 100 boxes of shrimps with a nominal weight of 10 kilograms. Because all of the boxes belong to the same batch, they all use the same batch number. As each box can vary in weight, the whole batch of boxes is weighed. The number of boxes and their total weight can be registered in a single transaction.

  Not C: Product masters and product variants

  In an agile world, where products must be quickly adapted to customer requirements, product definitions specify a set of products instead of distinct products. In Supply Chain Management, those generic products are known as product masters. Product masters hold the definition and rules that specify how distinct products are described and behave in business processes. Based on these definitions, distinct products can be generated. These distinct products are known as product variants.

  A product master is associated with a product dimension group and a configuration technology to specify the business rules. The product dimensions (Color, Size, Style, and Configuration) are a specific set of attributes that can be used throughout the application to define and track specific behaviors of the related products. These dimensions also help users search for and identify the products.

  Configuration technologies

  You can choose among three configuration technologies:

  * The predefined variants are defined by predefined product dimensions. The variant definition includes the definition of a specific valid combination of dimensions, such as Color, Style, and Size. Each combination produces a distinct product variant.

  * Etc.

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/product-information

  https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-catch-weight-items

• Question 102:

  HOTSPOT

  You need to resolve the shop supervisor's issue.

  Which options should you use? To answer, select the appropriate option in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 103:

  DRAG DROP

  A manufacturer is implementing Dynamics 365 Supply Chain Management to create blends of oil and industrial lubricant.

  The manufacturer requires detailed documentation for the production order process before manufacturing begins for the products.

  The shop floor must review, approve, and anticipate all production runs.

  Before production starts, the manufacturer wants to ensure that the order can be completed by a certain timeframe based on capacity.

  You need to define the production life cycle stages.

  Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 104:

  A company uses Lean manufacturing processes with Kanban boards.

  When unexpected transfer jobs occur, the board do not clear properly.

  You need to ensure that the boards clear properly.

  What are two possible ways to clear the board? Each correct answer presents a complete solution.

  NOTE: Each correct selection is worth one point.

  A. Change unplanned to planned.
  B. Delete the unplanned job.
  C. Revert the planned Kanban job status.
  D. Remove the planned Kanban job.
  C. Revert the planned Kanban job status.

  ---

  Explanation

  https://learn.microsoft.com/en-us/dynamics365/supply-chain/production-control/tasks/remove-kanban-job-

  schedule

  https://www.inogic.com/blog/kanban-board-infocentre/uninstalling-kanban-board/

• Question 105:

  A company uses cost groups to track calculated costs of items preassembled by vendors.

  The company needs to analyze service costs for each vendor's preassembled items.

  You need to assign the cost group type to the preassembled items.

  Which costs should you assign?

  A. Direct material
  B. Indirect
  C. Direct manufacturing
  D. Direct outsourcing
  A. Direct material

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/cost-management/cost-groups

• Question 106:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen.

  A manufacturing company produces electronic components and devices.

  The company has scheduling issues related to using working time calendars in manufacturing.

  You need to ensure that the working time calendar is used when manufacturing jobs are scheduled.

  Solution: Enable automatic consumption of run time.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  
  

• Question 107:

  HOTSPOT

  You need to configure each item for plastic manufacturing.

  Which production types should you use? To answer, select the appropriate option in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 108:

  DRAG DROP

  A company plans to account for indirect costs related to materials used to manufacture products.

  The items used to manufacture products have surcharge rates that depend on the type of product being used.

  You need to set up the costing sheet to include surcharges for specific items.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 109:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

  The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. IngredientA is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient

  You need to ensure that the system is set up to support the manufacturing process.

  Solution: Set up the IngredientB formula line as a phantom BOM.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  
  

• Question 110:

  You need to track the cost of donating leftover flour and sugar to local food banks.

  Which production option should you configure?

  A. by-product
  B. scrap percentage
  C. batch attribute
  D. catch weight
  A. by-product

  ---

  Explanation

  Leftover flour and sugar from production runs are collected, packaged, and donated to local food banks if the amount is too small to use in other runs.

  By-products are materials of value that are produced as a residual of, or incidental to, the production process. By-products can be recycled, sold as is, or used for other purposes. You can set up by-products to contribute costs, burden, to the overall production process.

  https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/about-co-products-and-by-

  products