Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 201:

  You need to configure production control parameters for liquid cleaning solution manufacturing.

  What are two possible ways to achieve this goal? Each correct answer presents a complete solution.

  NOTE: Each correct selection is worth one point.

  A. Require an electronic signature when the formula is approved.
  B. Select Block editing and approve the formula.
  C. Select the Block removal of approval option for the formula
  D. Select the Block editing option only.
  B. Select Block editing and approve the formula.
  C. Select the Block removal of approval option for the formula

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/formulas-versions

• Question 202:

  DRAG DROP

  You need to set up the system to calculate the overhead rates automatically for production.

  Which four actions should you perform in sequence?

  To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

• Question 203:

  HOTSPOT

  A company uses Dynamics 365 Supply Chain Management and wants to implement a distributed hybrid topology model to address performance issues at its distribution centers.

  The company operates a manufacturing plant, PlantA, located at the company's headquarters in Frankfurt, Germany, and has multiple distribution locations:

  1. Distribution1: Scotland

  2. Distribution2: Ireland

  3. Distribution3: United Kingdom

  4. Distribution4: Belgium, Germany, and the Netherlands

  5. Distribution5: Shetland Islands

  All distribution centers rely on Dynamics 365 Supply Chain Management to receive and distribute goods from PlantA. Warehouse personnel use the warehouse app to perform their tasks.

  Distribution1, 2, and 3 frequently transfer goods between each other and are managed collectively due to their proximity. However, Distribution5 (Shetland Islands) experiences connectivity issues that disrupt daily operations.

  The company aims to minimize its IT infrastructure, particularly in remote areas, while maintaining support for daily activities at all locations.

  You need to recommend an appropriate topology configuration.

  Which type of scaled unit should you implement? To answer, select the appropriate options in the answer area.

  

  

• Question 204:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

  The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor ingredient A is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

  You need to ensure that the system is set up to support the manufacturing process.

  Solution: Create a dimension-based product master with variants and use the trade agreements to specify the different pricing.

  Does the solution meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  Explanation

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/pim/dimension-based-product-configuration

• Question 205:

  You are the lead product design manage at a Process manufacturing plant.

  A formula that produces egg yolks as a by-product. This by-product is added back into inventory at standard cost and can be used in other production batches.

  You need to select the by-product cost allocation.

  Which cost allocation type should you use?

  A. Per series
  B. Percent
  C. Recycled
  D. Per quantity
  C. Recycled

  ---

  
  

• Question 206:

  DRAG DROP

  You are the quality assurance manager of a pharmaceuticals company.

  One of your customers has requested to only receive batches of item B0001 that have an acid concentration between 5.5 - 10.5 percent.

  You need to set up the customer specific batch attribute to track percent acid for B0001.

  Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  
  

• Question 207:

  HOTSPOT

  A discrete manufacturer uses Dynamics 365 Supply Cham Management for time and attendance registrations on the shop floor.

  Production worker A and production worker 8 clock in at 7 AM. They clock out at different times. Their work schedules are shown in the following table.

  

  You need to determine how the current configuration will book the time.

  What is logged in the system for each worker? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

  ---

  
  

• Question 208:

  You use the master planning module for Dynamics 365 Supply Chain Management.

  Planned production orders have been created.

  Several sales orders are canceled in response to concerns about recent online reviews of a product.

  You need to enable the appropriate action message.

  Which action message should you enable?

  A. Increase
  B. Decrease
  C. Advance
  D. Postpone
  E. Derived actions
  B. Decrease

  ---

  Explanation

  Decrease - The system will generate action messages when production orders, purchase orders, and other receipt transactions should be decreased to prevent excess inventory levels.

  Incorrect:

  * Increase - The system will generate action messages when production orders, purchase orders, and other receipt transactions should be increased to prevent shortages in inventory.

  * Advance - The system will generate action messages, as they are needed, to move orders to an earlier date. In the Advance margin field, you can specify the maximum number of days that can pass between a receipt and an issue without an advance action.

  * Postpone - The system will generate action messages, as they are needed, to move orders to a later date. In the Postpone margin field, you can specify the maximum number of days that can pass between a receipt and an issue without a postpone action.

  * Derived actions - Action messages that are created for receipt transactions will be propagated to any derived requirements, and the necessary action messages will be generated for the receipt transactions that satisfy those requirements.

  https://learn.microsoft.com/en-us/dynamics365/supply-chain/master-planning/action-messages

• Question 209:

  A manufacturing company uses master planning in Dynamics 365 Supply Chain Management.

  The production planner increases the lead time of an item. On the next master planning output the planner receives a cancel action message on existing purchase orders.

  The message includes a suggested earlier date for the planned purchase orders.

  The demand for the item has not changed since the original purchase order was placed.

  Dynamic negative days is not used.

  You need to resolve the issue.

  What should you do?

  A. Increase positive days.
  B. Decrease negative days to be less than the item lead time.
  C. Decrease positive days.
  D. Increase negative days to be greater than the item lead time.
  A. Increase positive days.

  ---

  Explanation

  The production planner increases the lead time of an item.

  As a rule, the positive days are set to a number that is between the longest lead time of the items and the coverage time fence. We recommend that you assign items that are regularly procured or produced to a coverage group where the positive days equal the item's lead time.

  Incorrect:

  Not B: The lead time was increased, we should not decrease the negative days.

  Not D: We recommend that you set the negative days to a number that is less than the lead time of the item.

  Note:

  Negative days

  Negative days indicate how late item receipts will be allowed. They represent the number of days that you're willing to wait before you order new replenishment when you have negative inventory or don't have enough inventory. Negative days answer the question, Should we create a new purchase order for the item, or should we use an existing purchase, even though we know that the item will be late?

  Positive days

  Positive days indicate how far in the future master planning considers the current inventory or receipts to fulfill a future demand. For example, if the positive days are set to 100, the current inventory can be used to fulfill demand in the next 100 days. If there is an order 150 days from the current date, master planning will create a planned order to satisfy that demand, even though the on-hand inventory for the item can satisfy the order. For fast-moving items that have a short lead time, you might not want to use the on-hand inventory for an order that is far in the future. In this fast-moving case, the current on-hand inventory will be gone quickly, and more orders could be placed in the future to fulfill a future demand on time, which would be possible due to the short lead time of the item.

  https://learn.microsoft.com/en-us/dynamics365/supply-chain/master-planning/master-planning-setup

• Question 210:

  You need to set up the configuration model to price the motorcycles correctly.

  What should you do?

  A. Set Order type in price model to Sales Order and Pricing method in Version to Attribute based
  B. Set Order type in price model to Sales Order and Pricing method in Version to Cost based.
  C. Set Order type in price model to Sales Quotation and Pricing method in Version to Attribute based.
  D. Set Order type in price model to Sales Quotation and Pricing method in Version to Cost based
  A. Set Order type in price model to Sales Order and Pricing method in Version to Attribute based