Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 191:

  HOTSPOT

  You need to modify the production order defaults for the manufacturing execution production order Start process.

  What should you do? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 192:

  DRAG DROP

  A discrete manufacturer uses the time and attendance registration for production operations.

  All employees register daily clock in and clock out times during a 40-hour. Monday through Friday workweek.

  Pay periods are every two weeks. Workers are paid hourly.

  The production manager will create work schedules with the following windows:

  1. Mandatory work hours

  2. Work hours during which employees can leave early without accruing absences

  3. Work hours during which employees can work extra time

  If a junior production worker works over 90 hours in a pay period. the worker will receive lime and a half over 80 hours. If a senior production worker works over 90 hours in a pay period, the worker will receive double time over 80 hours.

  Vou need to configure the system for these requirements.

  Where should you configure this functionality? To answer, drag the appropriate forms to the correct requirements. Each form may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

• Question 193:

  You are responsible for training the operations staff on production transactions in Dynamics 365 Supply Chain Management. The company uses backflushing for material consumption principles.

  You need to train the operators on how to report unintended scrap.

  What are two possible ways to achieve this goal? Each correct answer presents a complete solution.

  NOTE: Each correct selection is worth one point.

  A. Report additional time in route card journal
  B. Post additional materials in a picking list journal
  C. Report an error quantity at Report as finished
  D. Report an additional good quantity at Report as finished
  B. Post additional materials in a picking list journal
  C. Report an error quantity at Report as finished

  ---

  
  

• Question 194:

  You need to configure the system to meet the order requirements for unscented cleaning solution.

  Which three actions should you perform? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Add the ingredients for unscented cleaning solution to a regulated products inclusion list.
  B. On the inventory management parameters, set the value for the Print Product Safety Data Sheet and Prevent Sales Pack Slip/Invoice Posting to TRUE.
  C. In Document Handling, associate the PSDS file with the PSDS record and set restriction field set to Internal.
  D. Configure the ingredient as a restricted and regulated product.
  E. Ensure that the PSDS file is active and within the expiration date requirements.
  A. Add the ingredients for unscented cleaning solution to a regulated products inclusion list.
  B. On the inventory management parameters, set the value for the Print Product Safety Data Sheet and Prevent Sales Pack Slip/Invoice Posting to TRUE.
  E. Ensure that the PSDS file is active and within the expiration date requirements.

  ---

  Explanation

  A: Regulated items are identified once they are listed as a regulated item. It is common that material may be regulated in just certain regions, countries, or states. Therefore, the restricted items are entered for each region. If items are not on a Regional regulated item list, they are assumed to be not regulated. This list can be accessed either through Inventory management or the released products form.

  B: The inventory parameters (path: Inventory management Setup> Inventory and warehouse management parameters) allow you to govern the rules in the management of the product safety data sheet. These parameters are stored in an exclusive Product compliance section and are set within each legal entity. In this form you can outline:

  * Whether to automatically print safety data sheets when shipping.

  * Etc.

  E: Expiry advice defines the number of days before the expiration date of product safety data sheets that the system should begin presenting messages.

  Requirements, Liquid cleaning solution manufacturing, include:

  An ingredient used to manufacture unscented cleaning solution is defined as a restricted product. You must be able to automatically print a product safety data sheet (PSDS) with the packing slip for any order that includes unscented cleaning solution.

  https://dynamicconsulting.com/2020/10/29/managing-product-safety-data-sheets/

  https://stoneridgesoftware.com/managing-product-safety-data-sheets-in-dynamics-365-operations/

• Question 195:

  HOTSPOT

  A company plans to implement routing and route postings.

  You must direct positing of route cards based upon the route group at Report as finished. You set the start default order for route posting to Never and the Report as finished to Route Group Dependent.

  You set up the route group as shown below.

  

  Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

  NOTE: Each correct selection is worth one point.

  

  

  ---

  
  

• Question 196:

  A customer produces light projection toys for holiday decorations throughout the year.

  The production process creates the projection toy at the following work cells: stands, main assembly, electric, visuals, and packaging.

  Vendors must create templates for each toy they produce each season.

  They must manage the transfer of templates to the warehouse. Each transfer for each vendor must use the same purchase agreement.

  You need to configure the subcontracted transfer activity.

  What should you do?

  A. Set the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the vendor.
  B. Set the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse.
  C. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the warehouse.
  D. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements inside the vendor ID of the vendor.
  E. Set the transfer activity Freighted by value to Shipper. Ensure that purchase agreements include the vendor ID of the warehouse.
  F. Set the transfer activity Freighted by value to Carrier. Ensure that purchase agreements include the vendor ID of the warehouse.
  C. Set the transfer activity Freighted by value to Recipient. Ensure that purchase agreements include the vendor ID of the warehouse.

  ---

  
  

• Question 197:

  DRAG DROP

  A company uses Dynamics 365 Supply Cham Management.

  Several production orders are in the started status.

  An issue with equipment causes a rollback in the production status tor some of the orders.

  Some orders must be reset once the equipment is repaired, based on which products were being manufactured.

  You need to reset the production orders based on the requirements

  Which status should you use for each requirement? To answer, drag the appropriate statuses to the correct requirements. Each status may be used once, more than once, or not at all.

  You may need to drag the split bar between panes or scroll to view content.

  Select and Place:

  

  

• Question 198:

  A company implements Dynamics 365 Supply Chain Management.

  Due to increased demand and limited space in the work cell area tor product LOOM, you must subcontract overflow work to another company.

  You have the following requirements:

  1. Locate a warehouse at the subcontractor building.
  2. Support picking and shipping activity tracking.
  3. Associate costs of transporting materials between the locations in the cost of the finished product.

  You need to modify the production flow.

  Which three actions should you perform? Each correct answer presents part of the solution.

  NOTE Each correct selection is worth one point.

  A. Create a resource and work cell resource group for the subcontractor.
  B. Modify the over flow work operation and associate it with the subcontractor.
  C. Create transfer activities and assign them to the subcontractor.
  D. Modify the over ow work activity and assign it to the subcontractor.
  E. Create a new production flow version.
  A. Create a resource and work cell resource group for the subcontractor.
  B. Modify the over flow work operation and associate it with the subcontractor.
  C. Create transfer activities and assign them to the subcontractor.

  ---

  
  

• Question 199:

  HOTSPOT

  A customer produces light projection toys for holiday decorations throughout the year.

  You must implement Bills of material (BOMs) for the product lifecycle. The solution must meet the following requirements:

  

  You need to create a BOM for each phase.

  Which BOM types should you use? To answer, select the appropriate configuration options in the answer area

  NOTE: Each correct selection is worth one point.

  

  

• Question 200:

  A company produces energy-efficient LED lighting solutions. Production is dependent on primary and secondary resources.

  The primary resource is skilled assembly workers responsible for assembling LED lighting fixtures. The workers can work on only one fixture at a time during production.

  The secondary resource is automated LED soldering machines, which typically operate at a 50% load capacity. The machines can work on multiple LED lighting fixtures at the same time.

  The company must optimize the allocation of resources to meet customer demands efficiently.

  You need to configure the resources to meet the customer demand.

  What should you do?

  A. Navigate to the primary resource and define priority.
  B. Navigate to the primary resource and disable Finite material.
  C. Navigate to the primary resource and enable Exclusive.
  D. Navigate to the primary resource and disable Finite capacity.
  C. Navigate to the primary resource and enable Exclusive.