Huawei H12-211 Online Practice Questions and Exam Preparation

Huawei H12-211 Online Questions & Answers

• Question 301:

  When the router is powered on, the configuration file is read from the default storage path for initialization of the router. If there is no default storage path Configuration file, what will the router use to initialize?

  A. New configuration
  B. Initial configuration
  C. Default configuration
  D. Current configuration
  C. Default configuration

• Question 302:

  The above information is the port status information displayed on a switch running STP. Based on this information. The following description is wrong ().

  

  A. It is possible to include only this switch in this network.
  B. This switch may be a switch in the network.
  C. This switch is a non-designated switch for the network it is connected to
  D. This switch may be connected to 6 other switches.
  C. This switch is a non-designated switch for the network it is connected to

• Question 303:

  [R1]display interface GigabitEthernet0/0/0 GigabitEthernet0/0/0 current state : Administratively DOWN Line protocol current state : DOWN

  Refer to the display output. What can be determined based on the output of the display command?

  A. Interface Gigabit Ethernet 0/0/0 is connected to a wrong cable
  B. Interface Gigabit Ethernet 0/0/0 is not associated with an IP address
  C. Interface Gigabit Ethernet 0/0/0 is not associated with a dynamically defined route.
  D. Interface Gigabit Ethernet 0/0/0 has been manually shut down by an administrator.
  D. Interface Gigabit Ethernet 0/0/0 has been manually shut down by an administrator.

• Question 304:

  The following description about the ICMP redirect function is correct (). (multiple choice)

  A. After the router receives the data packet from an interface and sends the data packet from the interface again, the router will send ICMP. Redirect the message to the source device.
  B. After the router receives the data packet from an interface, it finds that the IP address of the interface and the destination IP address of the data packet are on the same network segment. The router will send an ICMP redirect message to the source device.
  C. After the router receives the data packet from an interface and sends the data packet from the interface, the source device will send an ICMP weight. Direct the message to the router.
  D. After the router receives the data packet from an interface, it finds the source IP address of the data packet and the next hop when the router continues to forward the data packet. If the IP address belongs to the same network segment, the router will send an ICMP redirect message to the source device.
  A. After the router receives the data packet from an interface and sends the data packet from the interface again, the router will send ICMP. Redirect the message to the source device.
  D. After the router receives the data packet from an interface, it finds the source IP address of the data packet and the next hop when the router continues to forward the data packet. If the IP address belongs to the same network segment, the router will send an ICMP redirect message to the source device.

• Question 305:

  If the network address of a network is 192.168.1.0, then its broadcast address must be 192.168.1.255.

  A. Correct
  B. Error
  B. Error

• Question 306:

  If a network's address is 192.168.1.0, the broadcast address of the network is 192.168.1.255.

  A. True
  B. False
  A. True

• Question 307:

  The ACL of the AR G3 series router supports two matching sequences: configuration order and automatic sorting.

  A. Correct
  B. Error
  A. Correct

• Question 308:

  Warning: Auto-Config is working. Before configuring the device, stop Auto-Config. If you perform configurations when Auto-Config is running, the DHCP, routing, DNS, and VTY configurations will be lost.

  Do you want to stop Auto-Config? [y/n]:

  When an administrator first initializes the router, a warning is displayed. Which statement regarding this warning is correct?

  A. If Auto-Config is required, the administrator should select `y'
  B. If Auto-Config is not required, the administrator should select `n', for which subsequent configuration of the DHCP server, routing, DNS server and VTY user configuration is lost
  C. When a device is started for the first time, the Auto-Config function is active.
  D. When a device is started for the first time, the Auto-Config function is inactive.
  C. When a device is started for the first time, the Auto-Config function is active.

• Question 309:

  Which of the following statements about the "ip route-static 10.0.2.2 255.255.255.255 10.0.12.2 preference 20" command is true?

  A. The destination network address of the route is 10.0.12.2/32.
  B. The mask length of the destination network address of the route is 32 bits.
  C. The preference of the route is 100.
  D. The route must exist in the routing table.
  B. The mask length of the destination network address of the route is 32 bits.

• Question 310:

  The broadcast address of the subnet 192.168.1.0/25 is 192.168.1.128.

  A. Correct
  B. Error
  B. Error