Huawei H12-211 Online Practice Questions and Exam Preparation

Huawei H12-211 Online Questions & Answers

• Question 291:

  Refer to the graphic. RTA and RTB have established an IPv6 network for which an IPv6 address has been configured only on the G0/0/1 interface. RTA is unable to ping RTB. The administrator then configures v3 along with a router-id on both routers, and enables OSPFv3 on G0/0/1 of both RTA and RTB.

  Which of the following statements are correct? (Choose two).

  A. RTA and RTB can establish an OSPFv3 neighbor relationship.
  B. RTA and RTB cannot establish an OSPFv3 neighbor relationship.
  C. RTA can ping RTB.
  D. RTA cannot ping RTB.
  A. RTA and RTB can establish an OSPFv3 neighbor relationship.
  D. RTA cannot ping RTB.

• Question 292:

  As shown in the figure, all three switches run GVRP, create VLAN 10 and VLAN 20 on SWA and SWC, and create them on SWB.

  VLAN 10. SWB dynamically learned VLAN 20 from SWA and SWC through GVRP. If the port G0/0/1 on the SWB is modified to be GVRP In the Fixed mode, the following description is correct ().

  

  A. Host A can continue to communicate with Host C.
  B. Host B can continue to communicate with Host D
  C. Hosts belonging to the same VLAN can continue to communicate
  D. All hosts cannot communicate with any other host
  A. Host A can continue to communicate with Host C.

• Question 293:

  Refer to the graphic. Two peering routers are running RIP. RTA is using RIPv2 to advertise its routes, while RTB is using RIPv1 to advertise the route 1.1.1.1/32. The administrator configures "RIP version 2 multicast" for interface G0/0/1 of RTB. How will the route 1.1.1.1/32 appear in the the IP routing table of RTA?

  A. This route will not appear in the IP routing table of RTA.
  B. This route will appear in the IP routing table of RTA as 1.0.0.0/8.
  C. This route will appear in the IP routing table of RTA as 1.0.0.0/24.
  D. This route will appear in the IP routing table of RTA as 1.0.0.0/32.
  D. This route will appear in the IP routing table of RTA as 1.0.0.0/32.

• Question 294:

  You can run the "startup saved-configuration backup.cfg" command on the user interface of the Versatile Routing Platform (VRP) to specify the "backup.cfg" file as the configuration file for next startup.

  A. True
  B. False
  A. True

• Question 295:

  Refer to the graphic. Host A is located in a private network. It is required that Host A not only be capable of routing traffic over the public network, but also that public users are able to actively communicate with Host

  A. Which NAT translation method should be configured on the gateway?
  B. Static NAT
  C. Dynamic NAT
  D. Easy-IP
  E. NAPT
  A. Which NAT translation method should be configured on the gateway?

• Question 296:

  If you use a 10 Gigabit optical module to interconnect two Huawei S5700 switches, the working mode of the interconnect port defaults to full duplex.

  A. Correct
  B. Error
  A. Correct

• Question 297:

  There are 50 private IP addresses in a company network. The administrator uses NAT technology to access the public network, and the company has only one public network address. Which NAT conversion method meets the requirements?

  A. Static conversion
  B. Dynamic conversion
  C. easy-ip
  D. NAPT
  C. easy-ip

• Question 298:

  Refer to the graphic. Which of the following statement describes the network shown?

  

  A. There are 4 collision domains in the network.
  B. There are 2 broadcast domains in the network.
  C. There are 6 broadcast domains in the network.
  D. There are 6 collision domains in the network.
  B. There are 2 broadcast domains in the network.

• Question 299:

  When the packet security mode of IPSec is tunnel mode, the IP address of the intranet host is hidden. The reason for this is to protect the entire original data. Package security

  A. Yes
  B. Wrong
  A. Yes

• Question 300:

  There is a TTL field in the header of the IP packet. The correct statement about this field is ()

  A. The length of this field is 7 digits.
  B. This field is used for packet fragmentation.
  C. This field is used for packet anti-ring
  D. This field is used to prioritize the packet data packet.
  C. This field is used for packet anti-ring