Extreme Networks EW0-100 Online Practice Questions and Exam Preparation

Extreme Networks EW0-100 Online Questions & Answers

• Question 121:

  Which of the following can you use to create a router interface?

  A. Create a VLAN, enable loopback mode, and assign an IP address and subnet mask.
  B. Create a VLAN and assign it an IP address and subnet mask.
  C. Create a VLAN and assign it an IPX net ID.
  D. None of these.
  A. Create a VLAN, enable loopback mode, and assign an IP address and subnet mask.

• Question 122:

  

  Which command provided the following information? __________. Do not abbreviate the CLI command.

  show vlan

• Question 123:

  What is the maximum number of ESRP domain member VLANs?

  A. 1000
  B. 2000
  C. 3000
  D. 4000
  C. 3000

• Question 124:

  How many autonomous systems are supported by Extreme Networks switches running OSPF?

  A. 1
  B. 2
  C. 4
  D. 8
  A. 1

• Question 125:

  In order for you to configure proxy ARP between subnets the __________ keyword must not be used.

  always

• Question 126:

  Exhibit:

  

  You need to setup an 8-port load share group between two switches. Summit #1 will use ports 1-8 and Summit #2 will also use ports 1-8. You will need to connect the ports in the following order: Summit #1, port 1 to Summit #2 port 8, Summit #1, port 2 to Summit #2, port 7, and so forth. Which commands will provide you with the desired result?

  A. Summit #1: enable sharing 1 grouping 1-8, Summit #2: enable sharing 1 grouping 1-8
  B. Summit #1: enable sharing 1 grouping 1-8, Summit #2: enable sharing 8 grouping 1-8
  C. Summit #1: config sharing 1 grouping 1-8, Summit #2: config sharing 1 grouping 1-8
  D. Summit #1: config sharing 1 grouping 1-8, Summit #2: config sharing 8 grouping 1-8
  A. Summit #1: enable sharing 1 grouping 1-8, Summit #2: enable sharing 1 grouping 1-8

• Question 127:

  

  Which predefined protocol filter does the following information relate to?________________

  netbios

• Question 128:

  Which command would you use to configure esrp vlan tracking for vlan engineering?

  A. config vlan add track-vlan engineering
  B. config esrp add track-vlan engineering
  C. enable vlan add track-vlan engineering
  D. enable esrp add track-vlan engineering
  A. config vlan add track-vlan engineering

• Question 129:

  What is the maximum recommended number of VLANs for a multinetted port?

  A. 2
  B. 3
  C. 4
  D. 5
  C. 4

• Question 130:

  What is the default STP forward delay value?

  A. 2 seconds
  B. 10 seconds
  C. 15 seconds
  D. 20 seconds
  C. 15 seconds