Extreme Networks EW0-100 Online Practice Questions and Exam Preparation

Extreme Networks EW0-100 Online Questions & Answers

• Question 111:

  What steps would you take to cause an ESRP enabled switch to transition to the slave and not transition back to the master state?

  A. Configure ESRP priority 0.
  B. Configure ESRP priority 1.
  C. Configure ESRP priority 254.
  D. Configure ESRP priority 255.
  D. Configure ESRP priority 255.

• Question 112:

  An Extreme Networks ABR can support up to __________ OSPF areas.

  8

• Question 113:

  Exhibit:

  

  How would you disable ports 3 through 8 on module 1 and all ports on modules 3 and 4?

  A. disable ports slot 1 ports 2-8, slot 3 ports 1-8, slot 4, ports 1-8
  B. unconfig ports 1:3-1:8, 3:1-4:8
  C. config vlan delete ports 1:3-1:8, 3:1-4:8
  D. disable ports 1:3-1:8, 3:1-4:8
  D. disable ports 1:3-1:8, 3:1-4:8

• Question 114:

  Which command would you use to determine the IP routes that are tracked by ESRP?

  A. show esrp
  B. show esrp detail
  C. show esrp config
  D. None of these.
  B. show esrp detail

• Question 115:

  Which of the following commands would you use to enable ECMP for RIP?

  A. enable rip route sharing
  B. enable route sharing rip
  C. enable iproute sharing
  D. None of these
  D. None of these

• Question 116:

  Which command would you use to configure VLAN corporate with IP address 192.168.0.1/16?

  A. config vlan corporate ipaddress 192.168.0.1/16
  B. config ipaddress corporate vlan 192.168.0.1/16
  C. config ipaddress 192.168.0.1/16 vlan corporate
  D. config ipaddress 192.168.0.1/16 corporate vlan
  A. config vlan corporate ipaddress 192.168.0.1/16

• Question 117:

  Which command would you use to configure ESRP ping tracking for the gateway address 10.0.0.1 with a frequency of 2 seconds and a miss threshold of 5?

  A. enable vlan add track-ping add 10.0.0.1 frequency 2 miss 5
  B. enable esrp add track-ping add 10.0.0.1 frequency 2 miss 5
  C. config esrp track-ping add 10.0.0.1 frequency 2 miss 5
  D. config vlan add track-ping 10.0.0.1 frequency 2 miss 5
  D. config vlan add track-ping 10.0.0.1 frequency 2 miss 5

• Question 118:

  OSPF allows network summary addresses to be injected:

  A. at ASBRs.
  B. at ABRs.
  C. at DRs.
  D. at BDRs.
  B. at ABRs.

• Question 119:

  What is the default STP maxage value?

  A. 20 seconds
  B. 30 seconds
  C. 40 seconds
  D. 60 seconds
  A. 20 seconds

• Question 120:

  How do you disable Split Horizon?

  A. disable rip splithorizon noadvertise
  B. unconfig rip splithorizon
  C. disable rip splithorizon
  D. unconfig rip splithorizon noadvertise
  C. disable rip splithorizon