Riverbed 830-01 Online Practice Questions and Exam Preparation

Riverbed 830-01 Online Questions & Answers

• Question 351:

  Which of the following is true about fetching Steelhead appliance's configurations from a CMC appliance?

  A. Fetched configurations are automatically saved as groups, which can be managed and applied to appliances and appliance policies
  B. Configurations cannot be fetched from the CMC appliance, they must be pushed C. Fetched configurations are automatically saved as policies, which can be managed and applied to appliances and appliance groups
  D. Fetched configurations are saved as system settings, which can be managed and applied to appliances and appliance groups
  C

• Question 352:

  What CLI command is used to view logs?

  A. show log
  B. show debug logging enable
  C. show debug logs enable
  D. view debug generate dump
  E. view logs
  F. tail -f/var/logs
  A. show log

• Question 353:

  For a new connection, an Interceptor appliance has no peer affinity, which Steelhead appliance will the Interceptor appliance choose for the connection?

  A. The Interceptor appliance selects the Steelhead appliance with the least connections
  B. The Interceptor appliance selects the Steelhead that has the most connections
  C. The Interceptor appliance selects the most loaded Steelhead appliance
  D. The Interceptor appliance selects the Steelhead appliance with the most peer affinity
  A. The Interceptor appliance selects the Steelhead appliance with the least connections

• Question 354:

  Branch office users live streaming video URL fragment requests are not optimized even though Microsoft Silverlight stream splitting is enabled. What could be the causing this? (Select 3)

  A. The client-side Steelhead appliance optimization service wasn't restarted.
  B. HTTP optimization is disabled on the client-side Steelhead appliance.
  C. The server-side Steelhead appliance optimization service wasn't restarted.
  D. HTTP optimization is disabled on the server-side Steelhead appliance.
  A. The client-side Steelhead appliance optimization service wasn't restarted.
  B. HTTP optimization is disabled on the client-side Steelhead appliance.
  D. HTTP optimization is disabled on the server-side Steelhead appliance.

• Question 355:

  In the exhibit, Client41 and Client42 have full access to the HTTP and FTP services provided by Server31 and Server32 respectively. They continue to have access to these servers after SH3 and SH4 are deployed. A quick check on SH3 and SH4 registers the connections from Client41 and Client 42 as pass-through traffic. Note that SH3 and SH4 are in auto-discovery mode. What are the likely causes? (Select 2)

  

  A. Pass-through rules are specified in the Steelhead appliances to bypass TCP traffic from Client41 and Client42
  B. Deny rules are specified in the Steelhead appliances to bypass IP traffic from Client41 and Client42
  C. There is a firewall inside the WAN cloud which strips the TCP options field
  D. There is a firewall inside the WAN cloud which strips the IP options field
  A. Pass-through rules are specified in the Steelhead appliances to bypass TCP traffic from Client41 and Client42
  C. There is a firewall inside the WAN cloud which strips the TCP options field

• Question 356:

  A user downloads a Microsoft Excel document from a server over an optimized connection. The transfer is very fast. The user makes some changes to the spreadsheet and then saves the document. The transfer is very slow. The user edited a Word document shortly before but that downloaded and saved at the same fast speeds. What happened to the Excel document?

  A. Microsoft Excel compresses and encrypts the data by default when saving Microsoft Excel data does not perform well for LZ compression and will always be slow.
  B. Microsoft Excel compresses the data by default when saving.
  C. Microsoft Excel reorders the entire data stream when it saves so it is now new (cold) data to the SteelHead.
  D. Microsoft Excel encrypts data by default when saving.
  B. Microsoft Excel compresses the data by default when saving.

• Question 357:

  Which of the following are valid QoS priority queues for Steelhead appliances? (Select 3)

  A. Normal
  B. Medium
  C. Real-time
  D. Low
  E. Critical
  A. Normal
  C. Real-time
  D. Low

• Question 358:

  The Interceptor appliance can be configured to redirect traffic to the Steelhead appliances via what methods?

  A. GRE
  B. L2
  C. ISIS
  D. Multicast
  E. Redirection is automatic and not configurable
  E. Redirection is automatic and not configurable

• Question 359:

  You have an in-house HTTP application running on port 8443 but you are not seeing HTTP optimization. You checked and made sure that the HTTP blade is enabled. What is the likely problem?

  A. Primary port needs to be on the LAN side of the Steelhead
  B. There is a separate license key for the HTTP blade
  C. The HTTP blade will only work on port 80 and 8080 and can not be changed
  D. The HTTP blade only supports HTTP 1.1 and the application is using HTTP 1.0
  E. HTTP blade is enabled by default on port 80 and 8080. An in-path rule is necessary for all other ports.
  E. HTTP blade is enabled by default on port 80 and 8080. An in-path rule is necessary for all other ports.

• Question 360:

  What is the command to verify a configuration of the Interceptor peers and peer neighbors?

  A. verify interceptor deployment
  B. service verify
  C. debug validate deployment
  D. config checker
  C. debug validate deployment