Riverbed 830-01 Online Practice Questions and Exam Preparation

Riverbed 830-01 Online Questions & Answers

• Question 311:

  Which of the following is true regarding the CMC appliance?

  A. Can be configured using its default IP address of 192.168.1.1
  B. Can be initially set up via the CLI
  C. Can be initially setup via the AUX interface
  D. Can be initially set up via telnet
  E. Both C and D
  B. Can be initially set up via the CLI

• Question 312:

  You need to perform a tcpdump of traffic entering the Steelhead appliance's lan0_0 interface. Which of the following demonstrate the proper command format to perform the tcpdump and capture to a file?

  A. tcpdump –p lan0_0 –S 300 –w lancap.cap
  B. tcpdump –i lan0_0 –s 300 –w lancap.cap
  C. tcpdump –i lan0_0
  D. tcpdump –I lan0_0 –s 300
  E. tcpdump –i lan0_0 -3 300 –r lancap.cap
  B. tcpdump –i lan0_0 –s 300 –w lancap.cap

• Question 313:

  When configuring failover, in what manner must you configure your Steelhead appliances? 1) Master/Backup 2) Primary/Secondary/Tertiary 3) Master/Master 4) Backup/Backup 5) Primary/Principle

  A. 1
  B. 2
  C. 3, 4
  D. 1, 3, 4
  E. 1, 2, 3, 4, 5
  A. 1

• Question 314:

  A customer with a new physical in-path installation decides to turn on the optimization service during lunch time on a working day. This is done so that he can see if the users perceive any performance improvement. When starting the optimization service, he does not enable the in-path kickoff option. Assuming there were several already active connections when he starts the optimization service, how will the Steelhead appliances handle these existing connections?

  A. The Steelhead appliance will optimize all connections, including pre-existing
  B. The Steelhead appliance will pass-through all pre-existing connections, leaving them un-optimized
  C. The Steelhead appliance will reset all pre-existing connections, thus automatically changing their optimization status from un-optimized to optimized
  D. The Steelhead appliance will list the connections as "pre-existing" on the Current Connections page
  E. Both B and D
  F. Both C and D
  E. Both B and D

• Question 315:

  Using an Interceptor appliance is an alternative to what network designs? (Select 2)

  A. WCCP
  B. PBR
  C. Connection Forwarding
  D. Fixed-target rules
  E. Peering rules
  A. WCCP
  B. PBR

• Question 316:

  You have a firewall between your clients and servers with a SteelHead deployed on the trunk link connected between them. The firewall must see all traffic on the original client and server IP address and VLAN IDs. What is required to support this?

  A. Full transparency and simplified routing all
  B. Correct addressing and simplified routing all
  C. Full transparency with probe-caching enabled
  D. Full transparency and simplified routing dest-source
  E. Correct addressing and simplified routing dest-source
  A. Full transparency and simplified routing all

• Question 317:

  The Optimization service has been disabled on a Steelhead appliance. Which of the following events occur as a result?

  A. LAN and WAN interfaces stop intercepting
  B. Primary interface becomes disabled
  C. AUX interface becomes disabled
  D. The Steelhead appliance reboots
  A. LAN and WAN interfaces stop intercepting

• Question 318:

  To verify that the Steelhead Mobile client software is running, what process should you look for in the Windows Task Manager?

  A. rbtsport.exe
  B. taskmgr.exe
  C. svchost.exe
  D. services.exe
  E. rivmobile.exe
  A. rbtsport.exe

• Question 319:

  Which of the following is NOT supported in Alarm Settings?

  A. Raise alarm when network interface duplex errors are detected
  B. Raise alarm when network interface link errors are detected
  C. Raise alarm when the number of optimized connections exceeds user specified limit
  D. Raise alarm if a software version mismatch is detected in the network
  E. Raise alarm when asymmetric routes are detected
  C. Raise alarm when the number of optimized connections exceeds user specified limit

• Question 320:

  In a previously optimized environment, users have recently upgraded their Windows XP workstations to Windows 7. After the upgrade, users are complaining about slow CIFS and encrypted MAPI performance. What is the most likely cause?

  A. The Steelhead appliance is only configured for transparent mode for SMB signing and MAPI encryption.
  B. Windows 7 is not supported.
  C. The client-side Steelhead appliance is not joined to the domain.
  D. The server-side Steelhead appliance is not joined to the domain.
  E. The Steelhead appliance only supports NTLM.
  A. The Steelhead appliance is only configured for transparent mode for SMB signing and MAPI encryption.