Riverbed 830-01 Online Practice Questions and Exam Preparation

Riverbed 830-01 Online Questions & Answers

• Question 301:

  Which logging severity levels are supported by the CMC appliance? (Select 4)

  A. Emergency
  B. Educational
  C. Info
  D. Notice
  E. Critical
  A. Emergency
  C. Info
  D. Notice
  E. Critical

• Question 302:

  -- Exhibit

  

  -- Exhibit -Refer to the exhibit. The connection from USER1, going to SERVER2 is not being optimized by SH10.

  What is the possible cause? (Select 2)

  A. The connection was forwarded to another Steelhead.
  B. This connection was pass through.
  C. Connection forwarding is working.
  D. This connection was never established.
  A. The connection was forwarded to another Steelhead.
  C. Connection forwarding is working.

• Question 303:

  When a SteelHead reaches `admission control', what happens to the network traffic it is processing?

  A. Existing optimized connections continue to be optimized but new connections are passed through.
  B. All existing connections continue to be optimized and new connections are also optimized.
  C. Existing optimized connections are passed through and new connections are optimized.
  D. All connections are reset to clear the alarm.
  E. All new connections are optimized except those which are MAPI pre-population.
  A. Existing optimized connections continue to be optimized but new connections are passed through.

• Question 304:

  In configuring failover settings, which of the following interfaces is used for communicating with the backup Steelhead appliance?

  A. inpath0_0
  B. inpath0_1
  C. Primary
  D. AUX
  E. None of the above
  A. inpath0_0

• Question 305:

  After a new physical in-path installation, all applications appear to be slower. Adding a pass-through rule does not seem to fix the problem. Which of the following is the most likely cause of the problem?

  A. Duplex mismatch
  B. Firewall blocking auto-discovery probes
  C. No fixed-target rules installed
  D. A and C
  E. A, B, and C
  A. Duplex mismatch

• Question 306:

  True or False? To be able to use Active Directory assignments, the SteelCentral Controller for SteelHead Mobile must be joined to the domain.

  A. True
  B. False
  A. True

• Question 307:

  You are troubleshooting a connection which is being passed-through. An in-path rule to optimize it is present, both SteelHeads are working and not in admission control. You examine the logs and find:

  [intercept.WARN] asymmetric routing between 10.11.111.19:33262 and 10.11.25.23:5001 detected (no SYN/ACK)

  What is the reason for the asymmetry?

  A. Complete asymmetry
  B. SYN Retransmit
  C. Server-side asymmetry
  D. Client-side asymmetry
  E. Multi-SYN Retransmit
  D. Client-side asymmetry

• Question 308:

  -- Exhibit

  

  -- Exhibit -Refer to the exhibit. According to the screenshot, what does the highlighted symbol represent? (Select 2)

  A. The configuration of the Steelhead appliances on that cluster are not the same.
  B. The configuration of each one of those Steelhead appliances are different than the one on the CMC.
  C. It's missing a Push.
  D. It's not missing a Push.
  B. The configuration of each one of those Steelhead appliances are different than the one on the CMC.
  C. It's missing a Push.

• Question 309:

  What is required to be configured on a Steelhead appliance in order to work with an Interceptor appliance?

  A. Connection Forwarding
  B. Peering rules
  C. Fixed-target rules
  D. Pass-through rules
  E. Nothing needs to be configured since this is all automated
  A. Connection Forwarding

• Question 310:

  You have just completed upgrading the software version on your SteelCentral Controller for SteelHead Mobile. What will happen to the software on the SteelHead Mobile clients?

  A. The administrator must disconnect all clients and reinstall the software.
  B. They will stop optimizing they have upgraded.
  C. Nothing can happen until the administrator selects the new version in Manage > Assignments, Group Assignments.
  D. They will be upgraded automatically when they next connect.
  C. Nothing can happen until the administrator selects the new version in Manage > Assignments, Group Assignments.