Microsoft 70-680 Online Practice Questions and Exam Preparation

Microsoft 70-680 Online Questions & Answers

• Question 251:

  Your company office network includes a file server that has Windows Server 2008 R2 installed and client computers that have Windows 7 Enterprise installed. The computers are members of an Active Directory domain. The file server has the BrachCache features installed.

  You create a shared folder on the server and enable BranchCache on the shared folder.

  You discover that the users of the client computers are unable to access files in the shared folder.

  You need to provide access for the users to the shared folder.

  What should you do?

  A. Run the Netsh branchcache set service mode=HOSTEDSERVER client authentication=NONE command
  B. Configure firewall exception rules for multicast traffic, inbound and outbound traffic for local UDP port 3702, and inbound and outbound traffic for local TCP port 80.
  C. Create a Group Policy that sets Hash Publication for BranchCache as disabled.
  D. Run the netsh branchcache set service mode=DISTRIBUTED command.
  E. Create a Group Policy object and configure the Set percentage of disk space used for client computer cache option.
  F. Check permissions.
  G. Run the netsh branchcache set service mode=HOSTEDCLIENT command.
  H. Create a Group Policy object and enable the Set BranchCache Hosted Cache mode policy.
  I. Configure firewall exception rules for inbound and outbound traffic for local TCP port 80 and for inbound and outbound traffic for local TCP port 8443.
  F. Check permissions.

  ---

  Have the users been given access to the files (what does BranchCache have to do with accessing files locally etc).

• Question 252:

  You have a custom image of Windows 7.

  You discover that the boot configuration data store in the custom image is corrupted. You need to create a new configuration data store within the custom image.

  What should you do?

  A. Run Imagex.exe and specify the /append parameter. Run Bcdedit.exe.
  B. Run Imagex.exe and specify the /mountrw parameter. Run Bcdedit.exe.
  C. From Windows System Image Manager (Windows SIM), select the image and then create a configuration set.
  D. From Windows System Image Manager (Windows SIM), select the image and then create a catalog.
  B. Run Imagex.exe and specify the /mountrw parameter. Run Bcdedit.exe.

  ---

  Imagex

  ImageX is a command-line tool that enables original equipment manufacturers (OEMs) and corporations to capture, to modify, and to apply file-based disk images for rapid deployment. ImageX works with Windows image (.wim) files for

  copying to a network, or it can work with other technologies that use .wim images, such as Windows Setup, Windows Deployment Services (Windows DS), and the System Management Server (SMS) Operating System Feature Deployment

  Pack.

  /append

  Appends a volume image to an existing Windows image (.wim) file. Creates a single instance of the file, comparing it against the resources that already exist in the .wim file, so you do not capture the same file twice

  /mountrw

  Mounts a .wim file from Windows XP with Service Pack 2 (SP2), Windows Server 2003 with Service Pack 1 (SP1), or Windows Vista with read/write permission to a specified directory. Once the file is mounted, you can view and modify all the

  information contained in the directory.

  Bcdedit

  BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, including creating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit serves essentially the same purpose

  as Bootcfg.exe on earlier versions of Windows, but with two major improvements: BCDEdit exposes a wider range of boot options than Bootcfg.exe, and BCDEdit has improved scripting support.

  NOT Windows SIM

  Opens Windows images, creates answer files, and manages distribution shares and configuration sets.

  NOTE: question specifies configuration data store, not configuration set.

• Question 253:

  Your company network includes a Windows Server 2008 R2 server named Server1 and client computers that have Windows 7 installed. All computers are members of an Active Directory domain. You use a computer named Client1.

  You plan to collect events from Client1 on Server1 by using HTTPS. On Server1, you start and configure the Windows Event Collector service. ON Client1, you start the Windows Remote Management Service.

  You discover that no events are being collected.

  You need to ensure that events are forwarded from Client1 to Server1.

  What should you do?

  A. On Client1, create an inbound rule to allow port 5986 for the Public connection type.
  B. On Server1, create a Windows Event Collector firewall exception for the connection type.
  C. On Client1, create an outbound Rule to allow port 443 for the Domain connection type.
  D. ON Client1, create an inbound rule to allow port 5986 for the Domain connection type.
  D. ON Client1, create an inbound rule to allow port 5986 for the Domain connection type.

• Question 254:

  You are a systems administrator for a company that uses Windows 7 computers.

  The company plans on upgrading all the computers. You have configured one computer, named SOURCE, with a power plan that meets a criteria for reduced power consumption. You want to test this power plan on another computer named

  DEST.

  You need to transfer the power plan from SOURCE to DEST.

  Which three actions should you perform in sequence? (To answer, move the appropriate four actions from the list of actions to the answer area and arrange them in the correct order. )

  Select and Place:

  

  

  ---

  Note:

  * powercfg. exe

  You can use the Powercfg. exe tool to control power settings and configure computers to default to Hibernate or Standby modes.

  The Powercfg. exe tool is installed with Windows.

  /Syntax:

  powercfg [-l] [-q ] [-x] [-changename] [-duplicatescheme] [-d] [-deletesetting] [-setactive] [-getactivescheme] [-setacvalueindex] [-setdcvalueindex] [-h] [-a] [-devicequery] [-deviceenablewake] [-devicedisablewake] [-import] [-export] [-lastwake]

  [-?] [-aliases] [-setsecuritydescriptor] [-getsecuritydescriptor]/ export filename GUID Exports a power scheme, represented by the specified GUID, to the specified file.

  / -import filename [GUID]

  Imports all power settings from the specified file.

• Question 255:

  You have a dual boot PC running both Vista and Windows 7 on partitions on the computer. Which file would you edit to force the PC to book Vista by default?

  A. boot.ini
  B. ntfsboot.cfg
  C. bcdedit.exe
  D. system.cfg
  C. bcdedit.exe

• Question 256:

  You are a system administrator for a regional accounting firm. The existing computers have either Windows Vista Enterprise or Windows Vista Home Premium installed.

  Your manager wants you to upgrade all computers to Windows 7.

  You need to determine which editions of Windows 7 support an in-place upgrade from the two editions of Windows Vista.

  In the table below, identify which editions of Windows 7 will support an in-place upgrade from Windows Vista Enterprise and Home Premium. (Make only one selection in each column. This question is worth two points. )

  Hot Area:

  

  

  ---

  Note:

  * You can only do an in place upgrade from Vista Enterprise to Windows 7 Enterprise, and only in the same bit level (32 or 64bit).

  

• Question 257:

  You have a computer that runs Windows 7. Your computer s disk configuration is shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that you can create a striped volume on the computer.

  What should you do?

  A. Add an additional hard disk.
  B. Convert all disks to dynamic disks.
  C. Install a digitally-signed disk driver.
  D. Set the Startup Type of the Virtual Disk Service (VDS) to Automatic.
  B. Convert all disks to dynamic disks.

  ---

  A striped volume is a dynamic volume that stores data in stripes on two or more physical disks. Data in a striped volume is allocated alternately and evenly (in stripes) across the disks. Striped volumes offer the best performance of all the

  volumes that are available in Windows, but they do not provide fault tolerance. If a disk in a striped volume fails, the data in the entire volume is lost.

  You can create striped volumes only on dynamic disks. Striped volumes cannot be extended. You can create a striped volume onto a maximum of 32 dynamic disks.

  Backup Operator or Administrator is the minimum membership required to complete the actions below.

  Creating a striped volume

  Using the Windows interface

  Using a command line

  To create a striped volume using the Windows interface In Disk Management, right-click the unallocated space on one of the dynamic disks where you want to create the striped volume, and then click New Striped Volume....

  Follow the instructions on your screen.

  To create a striped volume using a command line

  Open a command prompt and type diskpart.

  At the DISKPART prompt, type list disk. Make note of the number of the disk where you want to create a striped volume.

  At the DISKPART prompt, type create volume stripe [size=] [disk=[, [,

  ...]].

• Question 258:

  You have a Windows 7 computer in a workgroup. Multiple users with different local user accounts share the computer.

  You need to restrict the rights so that only Administrators can download and install Windows Updates.

  What should you do?

  A. Set the Allow all users to install updates option on this computer to Unchecked.
  B. Configure Windows Updates to download updates but let you choose to install them.
  C. Turn off Automatic Updates.
  D. Remove all local users from the Administrators security group.
  A. Set the Allow all users to install updates option on this computer to Unchecked.

  ---

  Ref: http://windows.microsoft.com/en-us/windows/updates-faq#1TC=windows-7

• Question 259:

  You have an offline virtual hard disk (VHD) that contains a generalized installation of Windows 7 Ultimate.

  You need to disable the built-in games in the VHD. You must achieve this goal by using the minimum amount of administrative effort.

  What should you do?

  A. Start a computer from the VHD. Run Ocsetup.exe and specify the /uninstall parameter. Recapture the VHD.
  B. Start a computer from the VHD. From Programs and Features, turn off the Games feature and then recapture the VHD.
  C. Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Pkgmgr.exe and specify the /uu parameter.
  D. Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Dism.exe and specify the /apply-unattend parameter.
  D. Create an answer file that has InboxGames disabled. On a computer that runs Windows 7, attach the VHD. Run Dism.exe and specify the /apply-unattend parameter.

  ---

  Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows?images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers, and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. /Apply-Unattend (Applies an unattend.xml file to an image.) If you are updating device drivers using an unattended answer file, you must apply the answer file to an offline image and specify the settings in the offlineServicing configuration pass. If you are updating packages or other settings using an unattended answer file, you can apply the answer file to an offline or online image. Specify the settings in the offlineServicing configuration pass.

• Question 260:

  Your network consists of an Active Directory domain and a DirectAccess infrastructure.

  You install Windows 7 on a new portable computer and join the computer to the domain.

  You need to ensure that the computer can establish DirectAccess connections.

  What should you do?

  A. Install a computer certificate.
  B. Create a new network connection.
  C. Enable the Network Discovery firewall exception.
  D. Add the computer account to the Network Configuration Operators group.
  A. Install a computer certificate.

  ---

  Certificates

  The DirectAccess IPsec session is established when the client running Windows 7 and the DirectAccess server authenticate with each other using computer certificates. DirectAccess supports only certificate-based authentication.

  DirectAccess Client Configuration

  Clients receive their DirectAccess configuration through Group Policy. This differs from traditional VPN configuration where connections are configured manually or distributed through the connection manager administration kit. Once you have

  added the computer's client account to the designated security group, you need to install a computer certificate on the client for the purpose of DirectAccess authentication. An organization needs to deploy Active Directory Certificate Services

  so that clients can automatically enroll with the appropriate certificates.