Microsoft 70-643 Online Practice Questions and Exam Preparation

Microsoft 70-643 Online Questions & Answers

• Question 201:

  You have a server that runs Windows Server 2008 Enterprise Edition. The server has the Failover Clustering feature installed. The server has three nodes named NODE1, NODE2, and NODE3.

  The Microsoft Distributed Transaction Coordinator (MSDTC) resource is installed on the cluster. The cluster has a dedicated cluster group named Group1 that includes the MSDTC resource.

  You discover that Group1 is unable to failover to NODE3 from NODE1 or NODE2. The failover from NODE1 to NODE2 functions without errors.

  You need to configure Group1 to support the failover between all cluster nodes.

  What should you do?

  A. Remove the MSDTC resource from Group1.
  B. Select NODE3 as a preferred owner for Group1.
  C. Remove NODE3 as a possible owner from all cluster resources in Group1.
  D. Configure NODE3 as a possible owner for all cluster resources in Group1.
  D. Configure NODE3 as a possible owner for all cluster resources in Group1.

• Question 202:

  You manage a computer named FTPSrv1 that runs Windows Server 2008.

  Your company policy requires that the FTP service be available only when required by authorized projects.

  You need to ensure that the FTP service is unavailable after restarting the server.

  What should you do?

  A. Run the iisreset command on the FTPSrv1 server.
  B. Run the net stop msftpsvc command on the FTP server.
  C. Run the suspend-service msftpsvc cmdlet in Microsoft Windows PowerShell tool.
  D. Run the WMIC /NODE:FTPSrv1 SERVICE WHERE caption="FTP Publishing Service" CALL ChangeStartMode "Disabled" command on the FTP server.
  D. Run the WMIC /NODE:FTPSrv1 SERVICE WHERE caption="FTP Publishing Service" CALL ChangeStartMode "Disabled" command on the FTP server.

  ---

  To make sure that FTP service unavailable after restarting the server, you need to Run the WMIC /NODE: TKFSVE SERVICE WHERE the caption="FTP Publishing Service" CALL ChangeStartMode "Disabled" command on this particular FTP server.

  The WMI command-line (WMIC) utility provides a command-line interface for WMI. The /Node command allows you to specify computer names and synchronously execute all commands against all computers listed in this value. To disable FTP service on the computer, you need to use ChangeStartMode "Disabled" command.

  Reference: http://msdn2.microsoft.com/en-us/library/aa394531(VS.85).aspx

  Reference: Gathering WMI Data without Writing a Single Line of Code / System Configuration Changes http://technet.microsoft.com/en-us/magazine/cc160919.aspx

• Question 203:

  Your network contains two servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.

  

  The network contains 100 client computers that connect to Remote Desktop Services (RDS) on Server2.

  Server1 has 100 Remote Desktop Services Per Device client access licenses (RDS Per Device CALs) installed.

  You exchange 10 client computers for 10 new client computers. You need to ensure that the RDS Per Device CALs allocated to the old client computers can be immediately reallocated to the new client computers.

  What should you do?

  A. From the Remote Desktop Session Host Configuration console on Server2, modify the Licensing settings.
  B. From the Remote Desktop Licensing Manager tool on Server1, run the Manage RDS CALs wizard and click the Migrate action.
  C. From the Remote Desktop Licensing Manager tool on Server1, navigate to the Windows Server 2008 R2 - Installed RDS Per Device CALs node and run the Install Licenses wizard.
  D. From the Remote Desktop Licensing Manager tool on Server1, navigate to the Windows Server 2008 R2 - Installed RDS Per Device CALs node and click the Revoke RDS CAL action.
  D. From the Remote Desktop Licensing Manager tool on Server1, navigate to the Windows Server 2008 R2 - Installed RDS Per Device CALs node and click the Revoke RDS CAL action.

  ---

  Revoke a Remote Desktop Services Per Device Client Access License When a Remote Desktop Session Host (RD Session Host) server is configured to use Per Device licensing mode, and a client computer or device connects to an RD Session Host server for the first time, the client computer or device is issued a temporary license by default. When a client computer or device connects to an RD Session Host server for the second time, if the Remote Desktop license server is activated and enough RDS Per Device CALs are available, the license server issues the client computer or device a permanent RDS Per Device CAL. If the license server is not activated or does not have any RDS Per Device CALs available, the device continues to use the temporary license. The temporary license is valid for 90 days.

  In some circumstances, you might want or need to return an RDS Per Device CAL that has been issued back to the available pool on the license server before the automatic expiration period has been reached. For example, you might want to do this if the client computer or device is no longer a part of your environment. You can revoke an RDS Per Device CAL by using the Remote Desktop Licensing Manager tool. After you have revoked the RDS Per Device CAL, that RDS Per Device CAL is immediately available to be issued to another client computer or device. Revocation is not a substitute for ensuring that you have enough RDS Per Device CALs to support your environment. You can only revoke up to twenty percent of the number of RDS Per Device CALs of a particular version installed on your license server.

  Source: http://technet.microsoft.com/en-us/library/cc732416.aspx

• Question 204:

  Your network contains 20 servers that run Windows Server 2008 R2 and 800 client computers that run Windows 7 Enterprise. The network contains a server named Server1 that has the Key Management Service (KMS) installed. You discover that the Windows 7 client computers are not added to the current count on the KMS host. You need to ensure that all client computers are added to the KMS current count on Server1.

  What should you do?

  A. On Server1, run slmgr.vbs /ato.
  B. On Server1, run slmgr.vbs /rearm.
  C. On each client computer, run slmgr.vbs /ato.
  D. On each client computer, run slmgr.vbs /rearm.
  D. On each client computer, run slmgr.vbs /rearm.

  ---

  Clients are not adding to the KMS count:

  You need to run sysprep /generalize or slmgr.vbs /rearm to reset the client computer ID (CMID) and other product activation information. Otherwise, each client computer looks identical and the KMS host does not count them as separate

  KMS clients.

  Source: http://technet.microsoft.com/en-us/library/cc303695.aspx

• Question 205:

  Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are configured as a failover cluster named Cluster1.

  Cluster1 hosts a clustered application named App1. App1 has a physical disk resource named Cluster Disk 1. You need to use the Chkdsk tool to fix all of the errors on Cluster Disk 1.

  What should you do first?

  A. From Disk Management, take Cluster Disk 1 offline.
  B. From Disk Management, disable write caching for Cluster Disk 1.
  C. From Failover Cluster Manager, modify the dependencies for Cluster Disk 1.
  D. From Failover Cluster Manager, enable maintenance mode for Cluster Disk 1.
  D. From Failover Cluster Manager, enable maintenance mode for Cluster Disk 1.

  ---

  Run a Disk Maintenance Tool Such as Chkdsk on a Clustered Disk To run a disk maintenance tool such as Chkdsk on a disk or volume that is configured as part of a clustered service, application, or virtual machine, you must use maintenance mode. When maintenance mode is on, the disk maintenance tool can finish running without triggering a failover. If you have a disk witness, you cannot use maintenance mode for that disk. Maintenance mode works somewhat differently on a volume in Cluster Shared Volumes than it does on other disks in cluster storage, as described in Additional considerations, later in this topic. Membership in the local Administrators group, or equivalent, is the minimum required

  to complete this procedure

  To run a disk maintenance tool such as Chkdsk on a clustered disk

  1.

  In the Failover Cluster Manager snap-in, if the cluster is not displayed, in the console tree, right- click Failover Cluster Manager, click Manage a Cluster, and select or specify the cluster you want.

  2.

  If the console tree is collapsed, expand the tree under the cluster that uses the disk on which you want run a disk maintenance tool.

  3.

  In the console tree, click Storage.

  4.

  In the center pane, click the disk on which you want to run the disk maintenance tool.

  5.

  Under Actions, click More Actions, and then click the appropriate command:

  If the disk you clicked is under Cluster Shared Volumes and contains multiple volumes, click Maintenance, and then click the command for the appropriate volume. If prompted, confirm your action.

  If the disk you clicked is under Cluster Shared Volumes and contains one volume, click Maintenance, and then click Turn on maintenance mode for this volume . If ompted, confirm your action.

  If the disk you clicked is not under Cluster Shared Volumes, click Turn on maintenance mode for this disk.

  6.

  Run the disk maintenance tool on the disk or volume. When maintenance mode is on, the disk maintenance tool can finish running without triggering a failover.

  7.

  When the disk maintenance tool finishes running, with the disk still selected, under Actions, click More Actions, and then click the appropriate command: If the disk you clicked is under Cluster Shared Volumes and contains multiple volumes, click Maintenance, and then click the command for the appropriate volume. If the disk you clicked is under Cluster Shared Volumes and contains one volume, click Maintenance, and then click Turn off maintenance mode for this volume . If the disk you clicked is not under Cluster Shared Volumes, click Turn off maintenance mode for this disk.

  Source: http://technet.microsoft.com/en-us/library/cc772587.aspx

• Question 206:

  You have a server named Server1 that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed.

  You have an SMTP gateway that connects to the Internet. The internal firewall prevents all computers, except the SMTP gateway, from establishing connections over TCP port 25.

  You configure the SMTP gateway to relay email for Server1.

  You need to configure a Web site on Server1 to send email to Internet users.

  What should you do?

  A. On Server1, install the SMTP Server feature.
  B. On Server1, configure the SMTP Email feature for the Web site.
  C. On an internal DNS server, create an MX record for Server1.
  D. On an internal DNS server, create an MX record for the SMTP gateway.
  B. On Server1, configure the SMTP Email feature for the Web site.

  ---

  Configure SMTP Email (IIS 7)

  Configure SMTP email in IIS when you want to deliver email messages from your site. Mail can be delivered immediately or it can be delivered to a file location on disk where it can be retrieved for delivery later. For example, a company can

  provide an email link for sending feedback messages or for requesting information.

  To configure SMTP email for a Web application

  1.

  Open IIS Manager and navigate to the level you want to manage. For information about opening IIS Manager, see Open IIS Manager (IIS 7). For information about navigating to locations in the UI, see Navigation in IIS Manager (IIS 7).

  2.

  In Features View, double-click SMTP Email.

  3.

  On the SMTP Email page, type the email address of the sender in the Email address text box.

  4.

  On the SMTP Email page, select one of the following delivery methods:

  a. Deliver email to SMTP server: to deliver email messages immediately. This requires an operational SMTP server for which the user has credentials. b. Store email in pickup directory: to store emails in a file location on disk for later delivery by an application such as an ASP.NET application, or by a user, such as an administrator.

  5. If Deliver email to SMTP server is selected, do the following:

  a. Type the unique name of your SMTP server in the SMTP Server text box or select the Use localhost box to set the name to LocalHost. Setting the name to LocalHost means that ASP.NET will use an SMTP server on the local computer. Typically, this is the default SMTP virtual server. b. Enter a TCP port in the Port text box. Port 25 is the SMTP standard TCP port and is the default setting.

  More than one virtual server can use the same TCP port if all servers are configured by using different IP addresses.

  c. Under Authentication Settings, specify the authentication mode and credentials if your SMTP server requires these.

  6.

  If Store email in pickup directory is selected, type the batch email location in the Store email in pickup directory text box.

  7.

  Click Apply in the Actions pane.

  Source: http://technet.microsoft.com/en-us/library/cc772058(WS.10).aspx

• Question 207:

  Your network contains a Web server named Server1.

  You install a server certificate on Server1.

  You need to ensure that users can access the default Web site over HTTPS.

  What should you configure from Internet Information Services (IIS) Manager? To answer, select the appropriate component or action in the answer area.

  Hot Area:

  

  

• Question 208:

  Your network contains a server that runs Windows Server 2008 R2. The server has Microsoft SharePoint Foundation 2010 installed. You create a new Web application named WebApp1. Webapp1 is configured to use a service account named Service1.

  You need to ensure that the password for Service1 is automatically changed every 30 days.

  What should you modify from Central Administration?

  A. the Authentication Providers
  B. the Managed Accounts settings
  C. the Password Management Settings
  D. the Service Account settings
  B. the Managed Accounts settings

  ---

  Configure managed accounts You need to register managed accounts with the farm to make the accounts available to multiple services. You can register a managed account by using the Register Managed Account page in Central Administration. There are no options on the Register Managed Account page to create an account in Active Directory Domain Services, or on the local computer. The options can be used to register an existing account on the SharePoint Foundation 2010 farm. Perform the steps in the following procedure to use Central Administration to configure managed account settings. To configure managed account settings by using Central

  Administration

  1.

  Verify that the user account that is performing this procedure is a farm administrator.

  2.

  On the Central Administration Web site, select Security.

  3.

  Under General Security, click Configure managed accounts.

  4.

  On the Managed Accounts page, click Register Managed Account.

  5.

  In the Account Registration section of the Register Managed Account page, enter the service account credentials.

  6.

  In the Automatic Password Change section, select the Enable automatic password change check box to allow SharePoint Foundation 2010 to manage the password for the selected account. Next, enter a numeric value that indicates the number of days prior to password expiration that the automatic password change process will be initiated.

  7.

  In the Automatic Password Change section, select the Start notifying by email check box, and then enter a numeric value that indicates the number of days prior to the initiation of the automatic password change process that an email notification will be sent. You can then configure a weekly or monthly email notification schedule.

  8.

  Click OK.

  Source: http://technet.microsoft.com/en-us/library/ff607826.aspx

• Question 209:

  Your network contains a server named Server1 that has the Web Server (IIS) server role installed.

  You need to ensure that the IIS configuration of Server1 is backed up daily. The solution must minimize the size of the backup.

  What should you do?

  A. Create a scheduled task that runs appcmd.exe.
  B. Create a scheduled task that runs Get-WebConfiguration.
  C. Create a scheduled task that runs iisbback.vbs.
  D. Create a scheduled task that runs iisconfig.vbs.
  A. Create a scheduled task that runs appcmd.exe.

  ---

  Ref: http://learn.iis.net/page.aspx/114/getting-started-with-appcmdexe/#Managing (Managing Backups section)

• Question 210:

  Your company hosts a Web site on a server that runs Windows Server 2008 R2. The server has the Web Server (IIS) server role installed. SSL is configured on the Web site for virtual directories that require encryption.

  You are implementing a new Web application on the Web site. The new application has its own logon page named userlogin.aspx. You enable Forms Authentication in the Web site properties. You need to configure the Web site to use

  userlogin.aspx to authenticate user accounts.

  What should you do?

  A. Configure the Forms Authentication Settings to Require SSL.
  B. Configure the Name property of the Cookie Settings to the userlogin.aspx filename.
  C. Configure the Login URL property for the Forms Authentication Settings to the userlogin.aspx filename.
  D. Configure the Default Document setting to add the userlogin.aspx filename in the Web site properties.
  C. Configure the Login URL property for the Forms Authentication Settings to the userlogin.aspx filename.

  ---