Microsoft 70-643 Online Practice Questions and Exam Preparation

Microsoft 70-643 Online Questions & Answers

• Question 221:

  Your network contains a server that has the Remote Desktop Gateway (RD Gateway) role service installed.

  You plan to modify the Remote Desktop resource authorization policies (RD RAPs).

  You need to ensure that the new RD RAP settings are applied to all Remote Desktop sessions within one hour.

  What should you do?

  A. Configure the General settings of the Remote Desktop resource authorization policies (RD RAPs).
  B. Configure the Timeouts settings of the Remote Desktop connection authorization policies (RD CAPs).
  C. Configure the Network Resource settings of the Remote Desktop resource authorization policies (RD RAPs).
  D. Configure the Requirements settings of the Remote Desktop connection authorization policies (RD CAPs).
  B. Configure the Timeouts settings of the Remote Desktop connection authorization policies (RD CAPs).

  ---

  Section: Remote Desktop Services (RDS)

  

• Question 222:

  Your network contains an Active Directory domain. The domain contains client computers that run Windows 7. You activate Windows 7 and Microsoft Office 2010 on the client computers by using a Multiple Activation Key (MAK) key.

  You need to identify how many MAK activations remain.

  Which tool should you use?

  A. Group Policy Management Console (GPMC)
  B. Microsoft Office Activation Assistant (OAA)
  C. the Windows Activation wizard
  D. Volume Activation Management Tool (VAMT)
  D. Volume Activation Management Tool (VAMT)

  ---

  Volume Activation Management Tool (VAMT)

  Each MAK key has a predetermined number of allowed activations, based on an organization's volume licensing agreement. Each activation with Microsoft's hosted activation services reduces the MAK activation pool by one.

  MAK implementations should include how your organization plans to monitor the number of MAK activations that are left.

  Both MAK Independent and MAK Proxy activations can use VAMT to monitor this. VAMT is a standalone application that can run on Windows XP, Windows Server 2003, or Windows Vista. It reports on the license condition of all systems

  using MAK activation and tracks the MAK activation count.

  Source: http://technet.microsoft.com/en-us/library/cc303276.aspx#_Volume_Activation_Management_

• Question 223:

  Your network contains an Active Directory domain named conloso.com. The domain contains two member servers named Server1 and Server2.

  Server1 has the Remote Desktop Session Host (RD Session Host) role service installed. Server2 has the Remote Desktop Licensing (RD Licensing) role service installed. Server1 is configured to use Server2 as a Remote Desktop license server.

  A domain administrator configures the Default Domain Policy as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that Server1 continues to use Server2 as a Remote Desktop license server.

  What should you do?

  A. From Local Users and Groups on Server2, add Server1 to the Terminal Server Computers group.
  B. From Remote Desktop Session Host Configuration, modify the license settings of Server1.
  C. From Active Directory Users and Computers, add Server1 to the Terminal Server License Servers group.
  D. From Remote Desktop Licensing Manager, modify the properties of Server2.
  A. From Local Users and Groups on Server2, add Server1 to the Terminal Server Computers group.

  ---

  When the Remote Desktop Licensing role service is installed on the server, the Terminal Server Computers local group is created. The license server will respond only to requests for RDS CALs from Remote Desktop Session Host servers whose computer accounts are members of this group if the Computer Configuration \Administrative Templates\Windows Components\Remote Desktop Services\RD Licensing\License server security group Group Policy setting has been enabled and applied to the license server. By default, the Terminal Server Computers local group is empty.

  When the Remote Desktop Licensing role service is removed from the server, the Terminal Server Computers local group is deleted.

  Source: http://technet.microsoft.com/en-us/library/ee891291(WS.10).aspx

• Question 224:

  Your network contains a server named Web1 that has Microsoft SharePoint Foundation 2010 installed. Web1 has a site named Site1. You attempt to create an alert as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that alerts are sent as text messages. What should you do?

  A. From Central Administration, create a new trust relationship.
  B. From Site Settings, modify the RSS settings.
  C. From Site Settings, modify the site permissions.
  D. From Central Administration, modify the mobile account settings.
  D. From Central Administration, modify the mobile account settings.

  ---

  To configure or edit a mobile account for a server farm by using Central Administration Verify that you have the following administrative credentials:

  To configure a mobile account for a server farm, you must be a member of the Farm Administrators group on the computer that is running the SharePoint Central Administration Web site. On the Central Administration Home page, click

  System Settings. On the System Settings page, in the E-Mail and Text Messages (SMS) section, click Configure mobile account.

  On the Mobile Account Settings page, in the Text Message (SMS) Service Settings section, click the Microsoft Office Online link to access a list of service providers. On the Find an Office 2010 Mobile Service Provider page, in the Choose

  your wireless service provider's country/region list, select the country or region in which your wireless service provider is located.

  On the Find an Office 2010 Mobile Service Provider page, in the Choose your current wireless service provider list, select the wireless service provider that you want to use. After you make this selection, you are directed to the Web site of the

  service provider that you selected. On the Web site, you apply for the SMS service. When you receive the required information from the service provider, return to the Mobile Accounts Settings page. In the The URL of Text Message (SMS)

  Service box, type the URL of the SMS service. Note: Ensure that the service URL you enter is an HTTPS URL. In the User Name box and Password box, type the user name and password that you received from the SMS service provider.

  To confirm that the URL and user credentials are correct, click Test Service.

  Click OK.

  http://technet.microsoft.com/en-us/library/ee428323

• Question 225:

  Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Remote Desktop Session Host (RD Session Host) role service installed. Server1 hosts RemoteApp programs.

  Two hundred users connect to Server1 to run the RemoteApp programs.

  You need to use Performance Monitor to view the CPU usage of each RemoteApp program.

  Which Performance Monitor object should you monitor?

  A. Process
  B. Processor
  C. Terminal Services
  D. Terminal Services Session
  A. Process

• Question 226:

  You have a server that runs Windows Server 2008 R2. The server has the Hyper-V server role installed.

  You create a new virtual machine and perform an installation of Windows Server 2003 on the virtual machine.

  You configure the virtual machine to use the physical network card of the host server. You notice that you are unable to access network resources from the virtual machine. You need to ensure that the virtual host can connect to the physical

  network.

  What should you do?

  A. On the host server, install the Microsoft Loopback adapter.
  B. On the host server, enable the Multipath I/O feature.
  C. On the virtual machine, install the Microsoft Loopback adapter.
  D. On the virtual machine, install Microsoft Hyper-V Integration Components.
  D. On the virtual machine, install Microsoft Hyper-V Integration Components.

  ---

  Networking and virtual machines To connect a virtual machine to a virtual network, you add a virtual network adapter to the virtual machine and then connect the virtual network adapter to an existing virtual network. There are two types of network adapters available for Hyper-V: a network adapter and a legacy network adapter. The network adapter is designed specifically for Hyper-V and requires a virtual machine driver that is included with the Hyper-V integration services. This type of networking adapter provides better performance than a legacy network adapter and is the recommended choice when it can be used. Because this type of virtual network adapter requires integration services in the guest operating system, it can be used only with guest operating systems for which integration services are available.

  Note If a network adapter is configured for a virtual machine but integration services are not installed in the guest operating system, Device Manager lists the network adapter as an unknown device.

  Source: http://technet.microsoft.com/en-us/library/cc816585.aspx Integration services Integration services are available for supported guest operating systems as described in the following table.

  Windows 2003 SP2 Guest operating system - Device and service support Windows Server 2003 (x64 editions) with Service Pack 2 Drivers: IDE, SCSI, networking, video, and mouse

  Services:

  operating system shutdown, time synchronization, data exchange, heartbeat, and online backup Note This operating system does not support a legacy network adapter. Windows Server 2003 (x86 editions) with Service Pack 2 Drivers: IDE,

  SCSI, networking, video, and mouse Services:

  operating system shutdown, time synchronization, data exchange, heartbeat, and online backup Source: http://technet.microsoft.com/en-us/library/cc794868(WS.10).aspx

• Question 227:

  Your company has an Active Directory domain. All servers in the domain run Windows Server 2008 R2. The RD Gateway role service is installed on a server named Server1. The Remote Desktop Services server role is installed on servers named Server2 and Server3. Server2 and Server3 are configured in a load balancing Remote Desktop Server farm named Farm1. You install and configure the RD Connection Broker service on a new server named Server4. You need to configure Server2 and Server3 to join the RD Connection Broker.

  What should you do next?

  A. Configure Server2 and Server3 to use the RD Gateway role service to access RD Connection Broker.
  B. Create a new Group Policy object (GPO) that assigns Server4 to Server2 and Server3 as their connection broker server. Apply the GPO to Server2 and Server3.
  C. Configure a Group Policy object (GPO) to set the Set RD Gateway server address option in the Remote Desktop Services section to Server1. Apply the GPO to all client computers.
  D. Configure a Group Policy object (GPO) to set the Require secure RPC communications option in the Remote Desktop Services section to False. Apply the GPO to Server2 and Server3.
  B. Create a new Group Policy object (GPO) that assigns Server4 to Server2 and Server3 as their connection broker server. Apply the GPO to Server2 and Server3.

  ---

  Policy settings in this node control configuration of a Remote Desktop Session Host server that is a member of a load-balanced Remote Desktop Session Host server farm.

  Join RD Connection Broker

  This policy setting allows you to specify whether the RD Session Host server should join a farm in RD Connection Broker. RD Connection Broker tracks user sessions and allows a user to reconnect to their existing session in a load-balanced

  RD Session Host server farm. To participate in RD Connection Broker, the Remote Desktop Session Host role service must be installed on the server. If the policy setting is enabled, the RD Session Host server joins the farm that is specified

  in the

  Configure RD Connection Broker Farm

  Name setting. The farm exists on the RD Connection Broker server that is specified in the Configure RD Connection Broker Server name policy setting. If you enable this setting, you must also enable the "Configure RD Connection Broker

  Farm Name" and Configure RD Connection Broker Server name policy settings, or configure these settings by using either the Remote Desktop Session Host Configuration tool or the Terminal Services WMI provider. Configure RD

  Connection Broker farm name This policy setting allows you to specify the name of a farm to join in RD Connection Broker. RD Connection

  Broker uses the farm name to determine which RD Session Host servers are in the same RD Session Host server farm. Therefore, you must use the same farm name for all RD Session Host servers in the same loadbalanced farm. The farm

  name does not have to correspond to a name in Active Directory Domain Services.

  If you specify a new farm name, a new farm is created in RD Connection Broker. If you specify an existing farm name, the server joins that farm in RD Connection Broker. If you enable this policy setting, you must specify the name of a farm in

  RD Connection Broker.

  Configure RD Connection Broker server name

  This policy setting allows you to specify the RD Connection Broker server that the RD Session Host server uses to track and redirect user sessions for a load-balanced RD Session Host server farm. The specified server must be running the

  Remote Desktop Connection Broker service. All RD Session Host servers in a load-balanced farm should use the same RD Connection Broker server. Source: http://technet.microsoft.com/en-us/library/ee791821(WS.10).aspx

• Question 228:

  Your network contains a single Active Directory domain. The domain contains four servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.

  

  You need to ensure that Server1 only issues Remote Desktop Services client access licenses (RDS CALs) to Server2. Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. On Server1, add Server2 to the Terminal Server Computers group.
  B. On Server1, enable the License Server Security Group Group Policy setting.
  C. In the domain, add Server2 to the Terminal Server License Servers group.
  D. In the domain, configure the Set the Remote Desktop licensing mode Group Policy setting.
  A. On Server1, add Server2 to the Terminal Server Computers group.
  B. On Server1, enable the License Server Security Group Group Policy setting.

  ---

  When the Remote Desktop Licensing role service is installed on the server, the Terminal Server Computers local group is created. The license server will respond only to requests for RDS CALs from Remote Desktop

  Session Host servers whose computer accounts are members of this group if the Computer Configuration \Administrative Templates\Windows Components\Remote Desktop Services\RD Licensing\License server security group Group Policy

  setting has been enabled and applied to the license server. By default, the Terminal Server Computers local group is empty.

  When the Remote Desktop Licensing role service is removed from the server, the Terminal Server Computers local group is deleted.

  Source: http://technet.microsoft.com/en-us/library/ee891291(WS.10).aspx

• Question 229:

  Your network contains an Active Directory domain named fabrikam.com. The domain contains a Web server named Web1 that runs Windows Server 2008 R2.

  You create four Web sites named Site1, Site2, Site3, and Site4.

  You associate each Web site to a different application pool.

  You need to view the amount of memory that each application pool is currently using.

  Which feature should you use?

  A. Management Service
  B. HTTP Response Headers
  C. Worker Processes
  D. Request Filtering
  C. Worker Processes

• Question 230:

  You deploy a server that has Microsoft SharePoint Foundation 2010 installed. Users report that they cannot configure the Alert Me option for SharePoint documents.

  You need to ensure that users can create alerts.

  What should you modify from Central Administration?

  A. Configure Send To Connections
  B. Information Rights Management
  C. the Outgoing Email Settings
  D. the Workflow Settings
  C. the Outgoing Email Settings

  ---

  Configure alert settings for a Web application To help users keep track of changes that are made to a Web site, Microsoft SharePoint Foundation 2010 includes the alerts feature, which is an email notification service. Users can configure

  which alerts they want to receive or send to communicate and track changes to items on a Web site. Users can create alerts on the following items in a site:

  Lists Users are notified of changes to the list, such as when an item is added, deleted, or changed in a list.

  List items Users are notified of changes to a particular item in a list. Document libraries Users are notified of changes to the document library, such as when a document is added, deleted, or changed in a document library or when Web

  discussions are added, changed, deleted, closed, or started for a document.

  Documents

  Users are notified of changes in a particular document such as when a document is changed, added, deleted, or closed.

  You can use Central Administration to configure alerts. You can turn on or turn off alerts, and you can specify how many alerts users can create.

  Before alerts can work for any Web site, outgoing email must be enabled for the server. To configure alert settings for a Web application by using Central Administration

  1.

  Verify that the user account that is performing this task is a member of the Farm Administrators SharePoint group.

  2.

  On the SharePoint Central Administration Web site, click Application Management.

  3.

  On the Application Management page, click Manage Web Applications.

  4.

  Click the Web application for which you want to configure alerts. The ribbon becomes active.

  5.

  On the ribbon, click the General Settings drop-down menu, and then click General Settings.

  6.

  On the Web Application General Settings page, in the Alerts section, configure the following settings:

  Specify whether alerts are On or Off. By default, alerts are On. Specify the Maximum number of alerts that a user can create in a SharePoint Web site. This value

  can be any integer from 1 through 2,000,000,000, or you can specify that the number of alerts is unlimited. The default value is 500 alerts.

  7.

  After you have finished configuring alerts, click OK. Source: http://technet.microsoft.com/en-us/library/cc287751.aspx