Cisco 642-732 Online Practice Questions and Exam Preparation

Cisco 642-732 Online Questions & Answers

• Question 51:

  When performing a post-installation audit with an auditing tool such as Ekahau, which three steps are associated with the passive portion of the audit? (Choose three.)

  A. Check for co-channel interference.
  B. Make sure you emulate your customer client.
  C. Survey by SSID to ensure roaming is taking place.
  D. Check that you have adequate signal levels as surveyed.
  E. Verify that the network traffic of physical data rate and packet loss meets user requirements.
  F. Verify AP announced data rate coverage.
  A. Check for co-channel interference.
  D. Check that you have adequate signal levels as surveyed.
  F. Verify AP announced data rate coverage.

• Question 52:

  Mesh APs are commonly mounted alongside a pole, meaning they are both vertically aligned and the pole could partially block the mesh AP RF signal. What is the maximum degree angle to allow for blockage of the antenna field of view?

  A. 2 degrees
  B. 5 degrees
  C. 10 degrees
  D. 15 degrees
  B. 5 degrees

• Question 53:

  Which tool can best provide throughput verification?

  A. WLC > Monitor > Clients > LinkTest
  B. WaveDeploy
  C. InSSIDer
  D. Xirrus Wi-Fi Inspector
  B. WaveDeploy

• Question 54:

  When performing a post-installation audit using the Ekahau Survey tool, which four steps are associated with the passive portion of the audit? (Choose four.)

  A. Check that all channels are supported by the APs regardless of client capabilities.
  B. Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.
  C. Verify that the real-world network traffic (for example, physical data rate, packet loss, etc.) meets user requirements.
  D. When you have completed the post-installation surveys, compare them to the surveys that were performed before the installation. They should look nearly identical.
  E. Check to see if the signal levels on other access points that are heard on the same channel are at least 19 dBm weaker than the access point that you are next to.
  F. Survey by SSID to ensure that smooth roaming is taking place.
  A. Check that all channels are supported by the APs regardless of client capabilities.
  B. Check for co-channel interference by standing near an access point on one channel and watching for other access points that are on the same channel.
  D. When you have completed the post-installation surveys, compare them to the surveys that were performed before the installation. They should look nearly identical.
  E. Check to see if the signal levels on other access points that are heard on the same channel are at least 19 dBm weaker than the access point that you are next to.

• Question 55:

  DRAG DROP

  Select and Place:

  

  

• Question 56:

  When ordering the software licenses for a Cisco WLAN project, what are the minimum software packages required if the location requires 390 lightweight APs, 100 of which will be used for location services, and a Cisco 3310 MSE?

  A. One 500 AP single server license package for the WCS and one 3000 device license for the MSE.
  B. One 1000 AP single server license package for the WCS and one 500 device license for the MSE.
  C. One 1000 AP single server license package for the WCS and one 3000 device license for the MSE.
  D. One 500 AP single server license package for the WCS and one 1000 device license for the MSE.
  E. One 1000 AP single server license package for the WCS and one 2000 device license for the MSE.
  A. One 500 AP single server license package for the WCS and one 3000 device license for the MSE.

• Question 57:

  A company has requested an indoor wireless survey that supports 5GHz radio, 3x4 MIMO technology, and 3 spatial streams. Which AP is used to perform this survey?

  A. 600
  B. 1242
  C. 1600
  D. 2600
  E. 3600
  D. 2600

• Question 58:

  What document is required to build the Statement of Work?

  A. pre-survey questionnaire
  B. post-survey questionnaire
  C. site survey report
  D. installation report
  A. pre-survey questionnaire

• Question 59:

  The customer has an existing 802.11b/g network with Cisco 2500 controllers. The customer would like to migrate to an 802.11a/b/g/n WLAN. Which network infrastructure issue might impact client performance in this proposed controller-based solution?

  A. The additional application load placed on servers by 802.11n clients.
  B. A bottleneck may occur if the access switch port to the AP only supports 100 Mb/s full duplex.
  C. The additional load placed on a RADIUS server by 802.1X authentication traffic on the first work day of each week.
  D. The added delay WDS imposes on the client when they roam from one AP to another.
  B. A bottleneck may occur if the access switch port to the AP only supports 100 Mb/s full duplex.

• Question 60:

  What three pieces of information should be included in an installation report? (Choose three.)

  A. software versions of each AP
  B. configuration files for each WLC
  C. switch connection for each MAP
  D. license file for each RAP
  E. radio status for each AP
  F. mobility group name for each WLC
  A. software versions of each AP
  B. configuration files for each WLC
  E. radio status for each AP