Cisco 642-732 Online Practice Questions and Exam Preparation

Cisco 642-732 Online Questions & Answers

• Question 41:

  What is the optimal distance between APs for location services without taking into consideration the physical environment?

  A. 90 to 120 feet
  B. 80 to 100 feet
  C. 40 to 70 feet
  D. 10 to 25 feet
  E. 5 to 20 feet
  C. 40 to 70 feet

• Question 42:

  An engineer is conducting a passive survey. On what two items will data be collected? (Choose two.)

  A. RF interference
  B. rate shifting data rates
  C. roaming
  D. rouges
  E. encryption
  A. RF interference
  D. rouges

• Question 43:

  Refer to the exhibit.

  

  A company requires a multi-point bridge solution with Cisco 1400 series bridges. The central bridge (B1) is set to 10 dBm, the manufacturing remote bridge (B2) is set to 20 dBm, the inventory remote bridge (B3) is set to 20 dBm, and the shop remote bridge (B4) is set to 10 dBm. Which option is the maximum allowed power setting for all four bridges?

  A. B1=12dBmB2=12dBmB3=12dBmB4=12dBm
  B. B1=12dBmB2=24dBmB3=24dBmB4=24dBm
  C. B1=24dBmB2=12dBmB3=12dBmB4=12dBm
  D. B1=24dBmB2=24dBmB3=24dBmB4=24dBm
  E. B1=20dBmB2=20dBmB3=20dBmB4=20dBm
  F. B1=10dBmB2=24dBmB3=24dBmB4=24dBm
  B. B1=12dBmB2=24dBmB3=24dBmB4=24dBm

• Question 44:

  A new client has contacted you to design a WLAN solution for a new 30-foot high-bay warehouse that will use high-lift electric forklifts. The warehouse is currently empty except for storage racks. The customer is planning to continue to use their existing wireless barcode scanners and also deploy wireless IP phones for communication. Which four issues do you need to consider prior to performing the site survey? (Choose four.)

  A. Which protocol do the wireless barcode scanners and IP phones need to use?
  B. What is the proximity to other warehouses?
  C. Which types of goods will be stored in the warehouse and what is the expected average warehouse capacity?
  D. Do any planned WLC locations exceed 100 meter cable distances?
  E. Is there sufficient clearance between the roof and the top of the racks for placing APs?
  F. What is the expected humidity level in the warehouse on average during the year?
  G. Are there any secure enclosures that use chain-link fence that will require wireless access?
  A. Which protocol do the wireless barcode scanners and IP phones need to use?
  C. Which types of goods will be stored in the warehouse and what is the expected average warehouse capacity?
  E. Is there sufficient clearance between the roof and the top of the racks for placing APs?
  G. Are there any secure enclosures that use chain-link fence that will require wireless access?

• Question 45:

  Given an AP that can transmit at 100 mW and the client at 40 mW, which power setting should be used for a site survey?

  A. 10 mW
  B. 20 mW
  C. 40 mW
  D. 60 mW
  E. 80 mW
  F. 100 mW
  B. 20 mW

• Question 46:

  Refer to the exhibit. After performing a Layer 1 survey using Cisco Spectrum Expert, which result is indicated by the visual screen?

  

  A. Normal 802.11b activity
  B. Normal 802.11g activity
  C. Microwave oven interference
  D. Video camera interference
  E. Bluetooth device interference
  A. Normal 802.11b activity

• Question 47:

  An engineer is tasked with designing a WLAN. The customer is prioritizing data speeds to the desktop, but is also entertaining the idea of adding 802.11 phones in the future. Given this information, how should the engineer conduct the survey?

  A. consider the employee head count in congested office space and limit the edge of each cell to an RSSI of -67mW
  B. restrict AP cell edges to -67dB and be sure to strategically place APs in congested office spaces
  C. co-locate access points when possible to cover high user areas and place APs at each corner of the facility
  D. stagger the AP placements, and be sure to have a high signal to noise ratio that will accommodate the future VoIP devices
  B. restrict AP cell edges to -67dB and be sure to strategically place APs in congested office spaces

• Question 48:

  You have been asked to evaluate a new version 7.0 controller-based WLAN deployment. The customer wants to increase the number of indoor tags their network supports. How do you explain to the customer how wireless clients and RFID tags are licensed in the MSE?

  A. There is a 2:1 relationship between the number of clients and RFID tags that can be supported in the MSE.
  B. The number of clients and RFID tags are independent of each other and have separate license bases.
  C. There is a 3:1 relationship between the number of clients and RFID tags that can be supported in the MSE.
  D. The relationship between clients and RFID tags is balanced. So if you have more clients you have fewer RFID tags.
  E. RFID and wireless clients require separate dedicated MSE appliances.
  D. The relationship between clients and RFID tags is balanced. So if you have more clients you have fewer RFID tags.

• Question 49:

  An engineer needs to perform a site calibration using Cisco WCS. Which two types of data collection can be used? (Choose two.)

  A. data point
  B. area point
  C. radius point
  D. linear point
  E. hybrid point
  F. location point
  A. data point
  D. linear point

• Question 50:

  What is the vertical height that a MAP should not exceed for proper deployment?

  A. 15 ft
  B. 30 ft
  C. 45 ft
  D. 55 ft
  B. 30 ft