Avaya 3605 Online Practice Questions and Exam Preparation

Avaya 3605 Online Questions & Answers

• Question 91:

  Traceroute allows a route to be traced to a network using an Ethernet Routing Switch (ERS) 8600 CLI command. How could you use it to limit the number of hops the traceroute reports?

  A. Configure the P (base UDP port) to the number of maximum number hops.
  B. Configure the q (number of probes per TTL) to the number maximum number of hops.
  C. Configure the m (maximum TTL value) to the number of maximum number of hops.
  D. Configure the w (wait time per probe) to the number of maximum number of hops.
  C. Configure the m (maximum TTL value) to the number of maximum number of hops.

• Question 92:

  Consider four software upgrade events on an Ethernet Routing Switch (ERS) 2500 series switch:

  1.

  Upgrade the software image

  2.

  The System Reboots

  3.

  Backup the binary configuration to a TFTP server

  4.

  Upgrade the boot/diagnostic code, if the new version is available Which sequence of events will correctly upgrade the software?

  A. 3.2.4. 1
  B. 3.4.2.1
  C. 3.2.1.4
  D. 1.2.4.3
  E. 1.4.2.3
  B. 3.4.2.1

• Question 93:

  Which statement describes the specific mechanism available for managing the switch using a common IP address, regardless of which CPU is the primary?

  A. The net mgmt port can be assigned a virtual address for management access.
  B. Virtual Router Redundancy Protocol (VRRP) provides a virtual IP address.
  C. Routed Split-Link Trunk Edge (ESMLT-Edge) provides access.
  D. The Virtual Routing Forwarding (VRF) feature includes a Circuit less IP address.
  A. The net mgmt port can be assigned a virtual address for management access.

• Question 94:

  After issuing a show mlt list stats (CLI) or show ist Stat (ACLI) command, it is determined that the running type is normal MLT and not 1ST. What are two causes of the IST not running properly? (Choose two)

  A. The IST is not enabled on both switches.
  B. The MLT ID does not match on both switches.
  C. The peer IP address is not the address of the peer switch IST VLAN.
  D. The peer IP addresses have to be 192.168.1.1/30 and 192.168.1.2/30.
  B. The MLT ID does not match on both switches.
  C. The peer IP address is not the address of the peer switch IST VLAN.

• Question 95:

  Ethernet Routing Switch (ERS) 5500 portfolio shares a number of common hardware features. Which feature is unique to the ERS 5530 and is not available on the other ERS 5500 switches?

  A. Universal Serial Bus (USB) port
  B. Network management Ethernet port
  C. User Interface push button
  D. Console serial port
  A. Universal Serial Bus (USB) port

• Question 96:

  What is the underlying dynamic link state routing protocol used for the implementation of the Avaya Enterprise Fabric?

  A. OSPF
  B. OSPFv3
  C. IS-IS
  D. SPBV
  B. OSPFv3

• Question 97:

  The goal of the Converged Campus architecture is to provide a highly reliable infrastructure with sub second failover preventing any interruption of traffic on the network. HMD primary benefits of this design goal? (Choose two)

  A. in the event of a failure, no loss of connectivity or application availability will be experienced by the end user
  B. The architecture provides high performance Layer 3 switching, resiliency, security, and services.
  C. This design goal provides numerous connectivity options including Asynchronous Transfer Mode (ATM), Packet over SONET (POS) and 10 gigabit Ethernet.
  D. The ability to provide hitless software upgrades for the core of the network.
  A. in the event of a failure, no loss of connectivity or application availability will be experienced by the end user
  D. The ability to provide hitless software upgrades for the core of the network.

• Question 98:

  Confirm that RSMLT will work on a set of VLANs. Which network design aspect should be considered?

  A. RSMLT is enabled on each SMLT VLAN on which the function is required
  B. RSMLT is enabled on the VLAN group.
  C. Router 1 always owns the network.
  D. RSMLT is enabled on all SMLT VLANs.
  A. RSMLT is enabled on each SMLT VLAN on which the function is required

• Question 99:

  Consider the following deployment requirements

  Support 40 100 Mb/s VoIP telephones, each with a power requirement of 6 Watt Support 40 directly connected 1000 Mb/s Ethernet workstations with UTP cable Support four 1Gb/s Ethernet uplinks to the core switch using multimode fiber.

  Which configuration is the minimum hardware required for an Ethernet Routing Switch (ERS) 8306 chassis that will support the above requirements?

  A. Two 8348TX-PWROne 8393SF
  B. One 8348GTxOne 8348Tx-PWROne 8393SF
  C. One 8348GTxOne 8348Tx-PWFOne 8308 XLOne 8393SF
  D. Two 8348GTx-PWFOne 8308XXOne 8393SF
  B. One 8348GTxOne 8348Tx-PWROne 8393SF

• Question 100:

  Which two functions describe VPFM? (Choose two.)

  A. It is a network health at a glance tool.
  B. It can correlate faults, traps, and provide notification.
  C. It is another term for the SNM credential.
  D. It is a device configuration tool.
  A. It is a network health at a glance tool.
  B. It can correlate faults, traps, and provide notification.