Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 171:

  Which option describes the default predictor on ACE to select the best server to fulfill a client request?

  A. the hash cookie, which selects the server by using a hash value that is based on a cookie name
  B. least bandwidth, which selects the server that processed the least amount of network traffic
  C. round robin, which selects the next server in the list of real servers
  D. the hash DNS, which selects the server using a hash value that is based on FQDN
  C. round robin, which selects the next server in the list of real servers

• Question 172:

  DHCP snooping on Cisco Nexus 1000V Series Switches acts like a firewall between untrusted hosts and trusted DHCP servers by doing which of these? (Choose three.)

  A. validates DHCP messages received from untrusted sources and filters out invalid response messages from DHCP servers
  B. intercepts all ARP requests and responses on untrusted ports
  C. builds and maintains the DHCP snooping binding database, which contains information about untrusted hosts with leased IP addresses
  D. uses the DHCP snooping binding database to validate subsequent requests from untrusted hosts
  E. limits IP traffic on an interface to only those sources that have an IP-MAC address binding table entry or static IP source entry
  A. validates DHCP messages received from untrusted sources and filters out invalid response messages from DHCP servers
  C. builds and maintains the DHCP snooping binding database, which contains information about untrusted hosts with leased IP addresses
  D. uses the DHCP snooping binding database to validate subsequent requests from untrusted hosts

• Question 173:

  Refer to the exhibit.

  

  A port profile is created in the VSM, but it is not seen in vCenter and cannot be assigned to a virtual machine. Given the configuration in the exhibit, which VSM command will resolve this issue?

  A. vmware port-group
  B. vmware port-active
  C. profile-active
  D. port-group active
  E. shutdown / no shutdown
  A. vmware port-group

• Question 174:

  Refer to the exhibit.

  

  The customer is trying to configure a rendezvous point, but for some reason it is failing. Which configuration should be applied on both Nexus devices to configure the rendezvous point?

  A. RT-2(config)#ip pim send-rp-discovery loopback10 RT-2(config)#interface lo0
  B. RT-2(config-if)#ip pim-sparse RT-2(config)#ip pim send-rp-announce lo10 group-list 239.0.0.0/24 RT-2(config)#interface lo0 RT-2(config-if)#ip pim-sparse
  C. RT-2(config)#ip pim send-rp-discovery loopback10 RT-2(config)#interface lo0 RT-2(config-if)#ip pim-sparse
  D. RT-1(config)#interface Vlan106 RT-1(config-if)#no ip pim border RT-2(config)# ip pim send-rp-announce lo10 group-list 239.0.0.0/24 RT-2(config)#interface lo0 RT-2(config-if)#ip pim-sparse
  E. RT-1(config)#interface Vlan106
  F. RT-1(config-if)#no ip pim border RT-2(config)# ip pim send-rp-discovery loopback10
  G. RT-1(config)#interface Vlan106 RT-1(config-if)#no ip pim border
  C. RT-2(config)#ip pim send-rp-discovery loopback10 RT-2(config)#interface lo0 RT-2(config-if)#ip pim-sparse

• Question 175:

  Which statement about NPV on the Cisco Nexus 5000 Series Switches is true?

  A. By default, Cisco Nexus 5000 Series Switches operate in NPV mode. In this mode, the switch providesstandard Fibre Channel switching.
  B. In NPV mode, each switch that joins a SAN is assigned a domain ID. Each SAN (or VSAN) supports amaximum of 239 domain IDs, so the SAN has a limit of 239 switches.
  C. In NPV mode, the edge switch relays all traffic from server-side sports to the core switch. The core switchprovides TE Port functionality to the downstream NPV switch.
  D. In NPV mode, the edge switch appears as a Fibre Channel host to the core switch and as a regular FibreChannel switch to its connected devices.
  D. In NPV mode, the edge switch appears as a Fibre Channel host to the core switch and as a regular FibreChannel switch to its connected devices.

• Question 176:

  Refer to the exhibit.

  

  You are connecting a Cisco Nexus 2000 to an existing Cisco UCS Fabric Interconnect domain for C-Series integration. Which option describes the next Cisco Nexus 2000 that will be discovered?

  A. FEX0101
  B. FEX0003
  C. FEX0102
  D. FEX1000
  E. FEX1001
  B. FEX0003

• Question 177:

  What is the main function of the device-alias distribute command?

  A. This command distributes the device alias configuration on the existing switch to all the other switches in the Cisco Fabric Services region.
  B. This command enables distribution and will send the configuration after a commit is executed.
  C. This command changes the distribution mode for device aliases.
  D. There is no such command.
  B. This command enables distribution and will send the configuration after a commit is executed.

• Question 178:

  You are about to assign a static UUID to a service profile. This particular UUID is also defined within the range of a UUID pool. The duplicate UUID in the pool has not yet been allocated. What will be the result of applying the static UUID?

  A. Applying the static UUID will fail with an error stating that the UUID exists within a defined resource pool.
  B. Applying the static UUID will succeed with no warnings.
  C. Applying the static UUID will succeed and a minor fault will be raised.
  D. Applying the static UUID will succeed and an information fault will be raised.
  E. Applying the static UUID will fail with an error stating that the UUID is a duplicate UUID.
  B. Applying the static UUID will succeed with no warnings.

• Question 179:

  Where is FIP negotiated?

  A. between E Nodes and VF ports
  B. between E Nodes and F Nodes
  C. between VF ports
  D. between VN ports
  E. between VN ports and VF ports and FCFs
  E. between VN ports and VF ports and FCFs

• Question 180:

  Refer to the exhibit.

  

  Which two statements are true? (Choose two)

  A. No server ports are configured.
  B. Four port channels are configured and they all are up.
  C. One port is not configured.
  D. No uplink ports are configured.
  E. Two appliance ports are configured.
  B. Four port channels are configured and they all are up.
  C. One port is not configured.