Cisco 351-080 Online Practice Questions and Exam Preparation

Cisco 351-080 Online Questions & Answers

• Question 191:

  Which two statements about Fibre Channel Class 2 are true? (Choose two.)

  A. Fibre Channel Class 2 provides a connection-oriented class of service.
  B. The F_BSY frame is part of Class 2.
  C. Class 2 acknowledges frame delivery.
  D. BB_Credits do not exist in Class 2.
  E. Dedicated bandwidth is allocated when using Class 2.
  B. The F_BSY frame is part of Class 2.
  C. Class 2 acknowledges frame delivery.

• Question 192:

  Drag Drop

  Select and Place:

  

  

• Question 193:

  After configuring FabricPath, the following message appears in the syslog:

  %STP-2-L2GW_BACKBONE_BLOCK: L2 Gateway Backbone port inconsistency blocking port port-channel100 on VLAN0010.

  What is a possible reason for this message?

  A. Spanning tree must be disabled, and the message indicates that STP is enabled.
  B. STP is misconfigured. The root guard must be disabled.
  C. An inferior BPDU was received on a Cisco FabricPath edge port.
  D. A superior BPDU was received on a Cisco FabricPath edge port.
  D. A superior BPDU was received on a Cisco FabricPath edge port.

• Question 194:

  You have configured a Cisco UCS C460 M2 Rack-Mount Server with two VIC 1225 adapters for single-wire management with Cisco UCS Manager. Which statement correctly describes the operation of these adapters?

  A. One VIC is designated to carry management, and the other VIC is designated to carry data traffic.
  B. Both VICs will be used for management and data traffic.
  C. One VIC will carry management, and both VICs will carry data traffic.
  D. The Cisco UCS C460 M2 does not support two VIC 1225 adapters simultaneously.
  C. One VIC will carry management, and both VICs will carry data traffic.

• Question 195:

  Which command is used to determine if a host has logged in to the Fibre Channel fabric?

  A. show flogi database
  B. show system fc login
  C. show npv flogi-table
  D. show npv fcns database
  E. show interface vfc X flogi
  F. show interface flogi
  A. show flogi database

• Question 196:

  The OTV overlay interface is a logical multiaccess and multicast-capable interface that must be explicitly defined by the user, and is the location where the entire OTV configuration is applied. Which two statements about the OTV overlay interface are true? (Choose two.)

  A. When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the overlay interface.
  B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.
  C. When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the join interface.
  D. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the overlay interface toward the routed domain.
  E. The OTV edge device performs the static OTV encapsulation on the Layer 3 packet and sends it to the join interface toward the switching domain.
  A. When the OTV edge device receives a Layer 2 frame that is destined for a remote data center site, the frame is logically forwarded to the overlay interface.
  B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.

• Question 197:

  Which two options correctly display IOM-to-Fabric Interconnect connectivity? (Choose two.)

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  A. Option A
  B. Option B

• Question 198:

  Which two statements about Cisco Nexus 1000V Series Switches are correct? (Choose two.)

  A. When VSM interfaces are created for a virtual machine, the VMware vSwitch port-group configuration is used initially, which requires the creation of a port-group name for these interfaces and an appropriate VLAN. The simplest configuration is to create a single port group (for example, VSM-Interfaces), that includes all the interfaces that use this port group and the same VLAN.
  B. The mgmt0 interface on the VSM does not necessarily require its own VLAN. In fact, you can use the same VLAN to which the VMware vCenter Server belongs. The VSM management VLAN is really no different from any other virtual machine data VLAN. Alternatively, network administrators can designate a special VLAN for network device management.
  C. Always deploy the Cisco Nexus 1000V Series VSM in pairs, with one VSM that is defined as the primary module and the other that is defined as the secondary module on two separate hosts.
  D. The service console is a critical interface that resides on every logical server.
  B. The mgmt0 interface on the VSM does not necessarily require its own VLAN. In fact, you can use the same VLAN to which the VMware vCenter Server belongs. The VSM management VLAN is really no different from any other virtual machine data VLAN. Alternatively, network administrators can designate a special VLAN for network device management.
  C. Always deploy the Cisco Nexus 1000V Series VSM in pairs, with one VSM that is defined as the primary module and the other that is defined as the secondary module on two separate hosts.

• Question 199:

  Which two statements about Cisco Nexus 1000V Series Switches are correct? (Choose two.)

  A. When VSM interfaces are created for a virtual machine, the VMware vSwitch port-group configuration is used initially, which requires the creation of a port-group name for these interfaces and an appropriate VLAN. The simplest configuration is to create a single port group (for example, VSM-Interfaces), that includes all the interfaces that use this port group and the same VLAN.
  B. The mgmt0 interface on the VSM does not necessarily require its own VLAN. In fact, you can use the same VLAN to which the VMware vCenter Server belongs. The VSM management VLAN is really no different from any other virtual machine data VLAN. Alternatively, network administrators can designate a special VLAN for network device management.
  C. Always deploy the Cisco Nexus 1000V Series VSM in pairs, with one VSM that is defined as the primary module and the other that is defined as the secondary module on two separate hosts.
  D. The service console is a critical interface that resides on every logical server.
  E. mgmt 0 interface on the VSM always use VLAN 1 for communication with VEM modules.
  B. The mgmt0 interface on the VSM does not necessarily require its own VLAN. In fact, you can use the same VLAN to which the VMware vCenter Server belongs. The VSM management VLAN is really no different from any other virtual machine data VLAN. Alternatively, network administrators can designate a special VLAN for network device management.
  C. Always deploy the Cisco Nexus 1000V Series VSM in pairs, with one VSM that is defined as the primary module and the other that is defined as the secondary module on two separate hosts.

• Question 200:

  When building a NIC team (virtual port channel) between a host and a pair of Cisco Nexus 5000 Series Switches that will carry FCoE traffic, what is the maximum number of physical links that can exist in the team?

  A. 1
  B. 2
  C. 4
  D. 5
  E. 16
  B. 2