Cisco 351-080 Online Practice
Questions and Exam Preparation
351-080 Exam Details
Exam Code
:351-080
Exam Name
:CCIE Data Center Written
Certification
:Cisco Certifications
Vendor
:Cisco
Total Questions
:473 Q&As
Last Updated
:Dec 16, 2021
Cisco 351-080 Online Questions &
Answers
Question 161:
Which three CLI configuration commands are for port profile as a private VLAN on Cisco Nexus 1000V Series switch? (Choose three.)
A. Switch (config-port-prof)# switchport private-vlan trunk allowed vlan vlan-range B. Switch (Config)# port-profiletypevethernetname C. Switch (config-port-prof)# switchport mode private-vlan host promiscuous D. Switch (config-port-prof)# switchport Private-vlan mapping primary_Vlan add secondary_vlan E. Switch (config-port-prof)# switchport Private-vlan host-association primary-vlan secondary-vlan
A. Switch (config-port-prof)# switchport private-vlan trunk allowed vlan vlan-range D. Switch (config-port-prof)# switchport Private-vlan mapping primary_Vlan add secondary_vlan E. Switch (config-port-prof)# switchport Private-vlan host-association primary-vlan secondary-vlan
Question 162:
Given the following configuration: port-profile type ethernet DATA-UPLINK vmware port-group switchport trunk allowed vlan 1-3967,4048-4093 channel-group auto mode on no shutdown state enabled port-profile type ethernet MGMT-UPLINK vmware port-group switchport trunk allowed vlan 10-12 channel-group auto mode on
no shutdown state enabled VEMs are seen to be joining and then are lost from the Cisco VSM. How would you resolve this issue?
A. Remove second NIC from each port profile B. Remove VEM from VSM (no vem X), remove NICs, and reinsert C. Ensure that VLANs on uplink profiles are not overlapping D. Reinstall VEM E. Issue the command "module vem X execute vemcmd set pinning module vsm 1"
C. Ensure that VLANs on uplink profiles are not overlapping
Question 163:
Which of the following are supported in Cisco Global Site Selector? (Choose three.)
A. Full DNS functionality as a replacement of a DNS B. Responds to a DNS query with A-record C. Forwards queries to a name server D. Multiple A-records E. DHCP functionality for the local hosts
B. Responds to a DNS query with A-record C. Forwards queries to a name server D. Multiple A-records
Question 164:
Which Sticky method is supported by Cisco ACE?
A. SIP B. SSL session ID C. scripted D. HTTP return code parsing
B. SSL session ID
Question 165:
Which statement about the converged network adapter is true?
A. The converged network adapter is a multifunction adapter that combines the functions of Ethernet NICs and Fibre Channel host bus adapters. B. The converged network adapters are compatible only with Cisco UCS. C. The converged network adapter is a virtualized multifunction adapter that combines the functions of Ethernet NICs and iSCSI on the same card. D. The converged network adapter is a multifunction adapter that works with multiple network speeds and duplex settings, and it supports several storage and network protocols.
A. The converged network adapter is a multifunction adapter that combines the functions of Ethernet NICs and Fibre Channel host bus adapters.
Question 166:
Which two statements about FabricPath are true? (Choose two.)
A. Multi-destination trees are built to create a loop-free topology for unicast traffic. B. FabricPath interfaces send and receive Ethernet and FabricPath encapsulated packets. C. FabricPath is supported on Cisco Nexus 7000 on all module types. D. FabricPath switch should always be the root for a spanning tree network attached to it. E. Spanning tree does not run inside a FabricPath network.
D. FabricPath switch should always be the root for a spanning tree network attached to it. E. Spanning tree does not run inside a FabricPath network.
Question 167:
Which three statements about Cisco FabricPath are correct? (Choose three.)
A. Only F1 or F2 ports can be used as FabricPath core ports. B. Only F1 or F2 ports can be used as edge ports to connect a legacy spanning tree domain (to switch traffic over the FabricPath domain). C. A FabricPath VLAN can exist on F1 or F2 ports only. D. Only M1 or M2 ports can be used as FabricPath core ports. E. Only F2 ports can be used as edge ports to connect a legacy spanning tree domain (to switch traffic over the FabricPath domain). F. A FabricPath VLAN can exist on F1 ports only.
A. Only F1 or F2 ports can be used as FabricPath core ports. B. Only F1 or F2 ports can be used as edge ports to connect a legacy spanning tree domain (to switch traffic over the FabricPath domain). C. A FabricPath VLAN can exist on F1 or F2 ports only.
Question 168:
What is the use of an "all configurations" backup in Cisco UCS?
A. Can be used to migrate from a 6120 to a 6140 and retain the same service profiles B. Can only be used on the fabric interconnect on which it was created C. Can be used to migrate from a 6120 to 6140 and retain system IP addresses and cluster information D. Can be used to match firmware versions between 6120 and 6140 during a migration
A. Can be used to migrate from a 6120 to a 6140 and retain the same service profiles
Question 169:
Refer to the exhibit.
Which two statements are true? (Choose two.)
A. Three pin groups are configured: one for the port-channel 10 in fabric interconnect B, one for int el/32 in fabric interconnect B, and one for int e1/31 in fabric interconnect B. B. Changing the target interface for an existing SAN pin group disrupts traffic for all vHBAs that use that pin group. The fabric interconnect performs a log in and log out for the Fibre Channel protocols to repin the traffic. C. To configure pinning for a server, you must include the SAN pin group in a vNIC policy. The vNIC policy is then included in the service profile assigned to that server. All traffic from the vNIC travels through the I/O module to the specified uplink Fibre channel port. D. In Fibre Channel switch mode, SAN pin groups are irrelevant. Any existing SAN pin groups are ignored. E. Edit this to show switch mode
B. Changing the target interface for an existing SAN pin group disrupts traffic for all vHBAs that use that pin group. The fabric interconnect performs a log in and log out for the Fibre Channel protocols to repin the traffic. D. In Fibre Channel switch mode, SAN pin groups are irrelevant. Any existing SAN pin groups are ignored.
Question 170:
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS?
A. Client IP B. Proxy IP C. Client and proxy IP D. Neither client nor proxy IP
Nowadays, the certification exams become more and more important and required by more and more
enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare
for the exam in a short time with less efforts? How to get a ideal result and how to find the
most reliable resources? Here on Vcedump.com, you will find all the answers.
Vcedump.com provide not only Cisco exam questions,
answers and explanations but also complete assistance on your exam preparation and certification
application. If you are confused on your 351-080 exam preparations
and Cisco certification application, do not hesitate to visit our
Vcedump.com to find your solutions here.