Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 451:

  A customer requires a solution to orchestrate the configuration of storage arrays, firewalls, and Cisco ACI networking. Additionally, the orchestration product must support open automation and a service catalog.

  Which solution meets these requirements?

  A. Cisco Workload Optimization Manager
  B. Cisco UCS Director
  C. Cisco Intersight
  D. Cisco Data Center Network Manager
  B. Cisco UCS Director

• Question 452:

  An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.

  Which action must be taken?

  A. The FCNS database must be disabled in the fabric.
  B. A port channel must be configured to the upstream switch.
  C. All switches in the fabric must be Cisco MDS switches.
  D. NPIV must be enabled on the upstream switch.
  D. NPIV must be enabled on the upstream switch.

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/int/nxos/cli_interfaces/npv.html

• Question 453:

  Refer to the exhibit.

  

  VLAN 10 is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  D. Option D

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide_7x_chapter_011100.html

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/4_2/nx-os/system_management/configuration/guide/sm_nx_os_cli/sm_15netflow.html

• Question 454:

  DRAG DROP

  Drag and drop the fields for configuring a full state backup file of the Cisco UCS Manager from the left onto the descriptions on the right.

  Select and Place:

  

  

• Question 455:

  The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders.

  What configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?

  A. fcoe fcf-priority 1024
  B. fcoe fcf-priority 512
  C. fcoe fcf-priority 0
  D. no fcoe fcf-priority
  C. fcoe fcf-priority 0

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/521n11/b_5k_FCoE_Config_521N11/b_5k_FCoE_Config_521N11_chapter_011.pdf

• Question 456:

  Refer to the exhibit.

  

  An engineer configures a Cisco C-Series UCS server.

  The company policy states that all C-Series servers must be configured so that Cisco IMC is reachable only from the management port of the server.

  Which NIC configuration must the engineer apply to meet this objective?

  A. NIC Mode: Shared OCP NIC Redundancy: Active-Active
  B. NIC Mode: Dedicated NIC Redundancy: None
  C. NIC Mode: Shared LOM NIC Redundancy: Active-Standby
  D. NIC Mode: Cisco Card NIC Reundancy: Active-Standby
  B. NIC Mode: Dedicated NIC Redundancy: None

• Question 457:

  Refer to the exhibit.

  

  What be connected to clear the HA NOT READY status?

  A. server chassis
  B. network uplinks
  C. management ports
  D. Layer 1-Layer 2 ports
  A. server chassis

• Question 458:

  Refer to the exhibit.

  

  An engineer must enable interlace Eth1/2 when the interface Ethi/1 is shut down using EEM on a Cisco Nexus 9000 Series Switch.

  Which command set accomplishes this goal?

  A. event syslog pattern Down_lnterface event manager applet "Interface Ethernetl/2. changed state to administratively down"
  B. event syslog pattern Down_lnteriace event manager applet "Interface Ethemetl/1, changed state to administratively down"
  C. event manager applet Down_lnterface event syslog pattern "Interface Ethernet 1 '1. changed state to administratively down"
  D. event manager applet Down interface event syslog pattern "Interface Ethernet 1/2, changed state to administratively down"
  C. event manager applet Down_lnterface event syslog pattern "Interface Ethernet 1 '1. changed state to administratively down"

  ---

  Explanation

  The goal is to automatically enable interface Eth1/2 whenever interface Eth1/1 is shut down. An EEM applet consists of an event (the trigger) and an action (the response).

  The Applet Name:

  The command event manager applet [name] initializes the applet.

  Options A and B incorrectly put the event syslog pattern before the applet definition. In NX-OS and IOS, you must first enter the applet configuration context before defining its parameters.

  The Event Trigger:

  The requirement is to trigger the script when Eth1/1 is shut down.

  Option C specifies event syslog pattern "Interface Ethernet 1/1, changed state to administratively down". This matches the standard syslog message generated when an interface is manually disabled.

  Option D is incorrect because it monitors Eth1/2 instead of Eth1/1 , meaning the script would only trigger if the interface it's trying to open was the one being shut .

  The Action Sequence (from the exhibit):

  The provided exhibit shows the actions that will be executed once the event occurs:

  action 1.0 cli command "enable" (Enter privileged mode).

  action 1.5 cli command "config t" (Enter configuration mode).

  action 2.0 cli command "interface Eth1/2" (Select the target interface).

  action 2.5 cli command "no shutdown" (Enable the target interface).

• Question 459:

  Refer to the exhibit.

  

  Which command must be used to restore configuration changes made by disabling the PIM feature and skipping any errors?

  A. rollback running-config checkpoint new-checkpoint stop-at-first-failure
  B. rollback running-config checkpoint new-checkpoint verbose
  C. rollback running-config checkpoint system-fm-pim-best-effort
  D. rollback running-config checkpoint system-fm-pim atomic
  C. rollback running-config checkpoint system-fm-pim-best-effort

• Question 460:

  Refer to the exhibit.

  

  An engineer must configure NX-I to accept only packets that exist in the routing table with the 9.9.9.2/32 source IP address and that are reachable via interface Eth 1/1.

  Which attribute to the ip verify unicast source command is needed to meet these requirements?

  A. interlace Elh1/2 with rx keyword
  B. interface Eth1/2 with allow-default keyword
  C. interface Eth1/1 with allow-default keyword
  D. interface Eth1/1 with rx keyword
  D. interface Eth1/1 with rx keyword