350-601 Exam Details
-
Exam Code
:350-601 -
Exam Name
:Implementing and Operating Cisco Data Center Core Technologies (DCCOR) -
Certification
:CCIE Data Center -
Vendor
:Cisco -
Total Questions
:708 Q&As -
Last Updated
:May 28, 2026
Cisco 350-601 Online Questions & Answers
-
Question 381:
Refer to the exhibit.
Two Cisco Nexus Series Switches use EIGRP between their Eth1/1 interfaces. The switches are configured to support EIGRP authentication. Which set of CLI commands must be used to establish EIGRP neighborship?
A. Option A
B. Option B
C. Option C
D. Option D -
Question 382:
An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch. The solution must meet these conditions: It must use a challenge-response authentication protocol that uses MD5 hashing with an incrementally changing identifier.
The RADIUS configuration must be automatically shared with other MDS switches in the environment.
The RADIUS server is already defined.
Which command set completes the configuration?
A. aaa authentication login chap enable radius distribute radius commit
B. aaa authentication login pap enable distribute radius radius-server host 10.8.8.0 auth-port 1821
C. aaa authentication login mschapv2 enable radius propagate radius authentication port 1821
D. aaa authentication login mschap enable radius commit radius-server host 10.8.8.0 -
Question 383:
Refer to the exhibit.
Which command set must be used to complete the configuration that configures a Cisco Nexus 9000 Series server scheduler to perform the backup of its configuration every Wednesday at 8:00 am?
A. N9K(config-schedule)# time weekly 4:08:00 N9K(config-schedule)# job name backup-cfg
B. N9K(config-schedule)# time weekly 4:08:00 N9K(config-schedule)# job name Backup-CFG
C. N9K(config-schedule)# time weekly Wed:08:00 N9K(config-schedule)# job name Backup-CFG
D. N9K(config-job)# time weekly Wed:08:00 N9K(config-job)# job name backup-cfg -
Question 384:
An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge.
What is the result of this action?
A. The zone merge stops.
B. The zone merge pauses until the upgrade completes
C. The upgrade stops
D. The zone merge executes and then the upgrade completes. -
Question 385:
Refer to the exhibit.
An engineer must restrict users assigned to the sangroup role on the Cisco MDS 9000 Series Switch from issuing commands on VSANs 15 to 20.
Which command must the engineer run to achieve this objective?
A. permit vsan 15-20
B. no vsan policy deny
C. vsan policy deny vsan 15-20
D. no permit vsan 15-20 -
Question 386:
A network engineer must determine the cooling requirements for a Cisco UCS C-Series Rack Server. The server with PCIe cards is configured with a fan configuration policy.
Which configuration should be used for the fan policy of the server?
A. server # scope chassis server /chassis # scope fan-policy server /chassis/fan-policy # set fan-policy high-power server /chassis/fanpolicy* # commit
B. server # scope chassis server /chassis # scope fan-policy server /chassis/fan-policy # set fan-policy balanced server /chassis/fan-policy* # commit
C. server # scope server server /server # scope fan-policy server /server/fan-policy # set fan-policy acoustic server /server/fan-policy* # commit
D. server # scope server server /server # scope fan-policy server /server/fan-policy # set fan-policy low-power server /server/fan-policy* # commit -
Question 387:
DRAG DROP
Refer to the exhibit.
The VSAN 4041 and 4042 are exchanged between two Cisco MDS 9000 Series Switches called MDS-1 and MDS-2. The objective is to deploy a security mechanism on MDS-1 to allow MDS-2 to join the fabric exclusively.
Drag and drop the code snippets from the bottom onto the boxes in the code to complete the MDS-1 configuration. Not all code snippets are used.
Select and Place:
-
Question 388:
Refer to the exhibit.
A developer must create a Bash script that performs a Chef Client reload in the event of a system reset.
Which command completes the script?
A. Option A
B. Option B
C. Option C
D. Option D -
Question 389:
The engineer must configure SPAN on a cisco Nexus 5000 Series switch to get a capture of the traffic from these applications for an in-depth packet analysis.
Which two characteristics must be considered? (Choose two.)
A. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
B. The rx/tx option is available for VLAN or VSAN SPAN sessions.
C. SPAN source port can be monitored in multiple SPAN sessions.
D. Only Ethernet, FC, vFC, port channel port types can be a destination SPAN port.
E. A SPAN source port cannot be a destination SPAN port. -
Question 390:
The Cisco TACACS+ on a Cisco Nexus Series Switch must authenticate any user attempting to access the device and fail over to the local account if the TACACS+ sever becomes unavailable.
Which command accomplishes these goals?
A. aaa authentication login default fallback error local
B. aaa authentication login console group local
C. aaa authentication login default local
D. aaa authentication login default group ISE local
Tips on How to Prepare for the Exams
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.