Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 271:

  Refer to the exhibit.

  

  An engineer reported suspicious behavior in a server farm that is deployed on the 198.19.1.0/24 subnet. The traffic must be captured only from the server with the IP address of 198.19.1.19/24. The traffic analyzer is connected to the same switch as the server farm.

  Which configuration set captures the traffic?

  A. switch(config)# ip access-list match_Server_pkts switch(config-acl)# permit ip 198.19.1.19 0.0.0.0 any switch(config)# monitor session 1 switch(config-monitor)# filter access-group span_filter
  B. switch(config)# ip access-list match_Server_pkts switch(config-acl)# permit ip 198.19.1.19 0.0.0.0 any switch(config)# monitor session 1 switch(config-monitor)# filter access-group 5
  C. switch(config)# ip access-list match_Server_pkts switch(config-acl)# permit ip 198.19.1.19 255.255.255.255 any switch(config)# monitor session 1 switch(config-monitor)# filter access-group span_filter
  D. switch(config)# ip access-list match_Server_pkts switch(config-acl)# permit ip 198.19.1.19 255.255.255.0 any switch(config)# monitor session 1 switch(config-monitor)# filter access-group span_filter
  A. switch(config)# ip access-list match_Server_pkts switch(config-acl)# permit ip 198.19.1.19 0.0.0.0 any switch(config)# monitor session 1 switch(config-monitor)# filter access-group span_filter

• Question 272:

  Refer to the exhibit.

  

  What is the result of implementing the configuration?

  A. RADIUS traffic is sourced from the VLAN 200 interface.
  B. The RADIUS server timeout value is 15 milliseconds.
  C. Only the RADIUS server is used for authentication.
  D. Users specify the RADIUS server when they log in.
  C. Only the RADIUS server is used for authentication.

• Question 273:

  An engineer evaluates a UI-based infrastructure management system capable of monitoring and deploying standardize VXLAN BGP EVPN deployments. The storage administrator also need the solution to manage the cisco MDS 9090 series Switches.

  Which solution meets these requirements?

  A. Intersight
  B. UCSD
  C. Tetration
  D. DCNM
  D. DCNM

• Question 274:

  DRAG DROP

  Drag and drop the command snippets from the bottom onto the boxes in the code to complete a Python script that displays a list of interfaces on a Cisco Nexus 9000 Series Switch using on-box Python. Not all command snippets are used.

  Select and Place:

  

  

• Question 275:

  Refer to the exhibit.

  

  What happens to the VRRP configuration when the router SW9621-2 becomes operational?

  

  A. The SW9621-2 router becomes a new active master.
  B. The SW9621-1 router becomes a new active master after 3 seconds.
  C. The SW9621-1 router remains an active master.
  D. The SW9621-2 router becomes an active master after 3 seconds.
  A. The SW9621-2 router becomes a new active master.

• Question 276:

  Refer to the exhibit.

  

  An engineer must implement VXIAN with anycast gateway. To accomplish this, an engineer must set up PIM Source-Specific Multicast for host reachability. Which IP address must be applied to interface loopback1 to accomplish this goal?

  A. 10.10.0.1/32
  B. 10.255.0.100
  C. 10.10.0.2/32
  D. 255.0.0.1/8
  B. 10.255.0.100

• Question 277:

  What is a disadvantage of deploying network-attached storage (NAS) versus Fibre Channel for storage?

  A. NAS lacks the scalability and performance of Fibre Channel.
  B. NAS centralizes storage devices which makes them easier to manage
  C. NAS is more complex and expensive to implement
  D. NAS operates independently of an organization's operating system
  A. NAS lacks the scalability and performance of Fibre Channel.

• Question 278:

  An engineer must implement a set of changes in a Cisco Nexus 9000 Series Switch so that:

  A snapshot must be taken locally before modifying the configuration.

  If the changes do not produce the expected outcome, the changes must be reverted even if any errors occur.

  Which set of actions meets these requirements?

  A. Create a user generated checkpoint. Rollback to this checkpoint with the best-effort option.
  B. Create a system generated checkpoint. Rollback to this checkpoint with the atomic option.
  C. Create a backup of the running configuration to an ftp server. Rollback to the configuration stored in the server.
  D. Create a copy of the running configuration in the startup configuration. Rollback to the startup configuration.
  B. Create a system generated checkpoint. Rollback to this checkpoint with the atomic option.

  ---

  
  

• Question 279:

  An engineer must affirm the identity of the Cisco UCS Manager after a valid CA-signed keyring for HTTPS access is created.

  Which action completes the configuration?

  A. Set Cipher Suite Mode
  B. Create a trusted point
  C. Implement SSLv3
  D. Enable TLSv1.2
  B. Create a trusted point

• Question 280:

  Refer to the exhibit.

  

  A network engineer must configure port E1/31-32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B. Port E1/31-32 is not reserved for any other traffic.

  Which port type must be configured to accomplish this goal?

  A. FCoE storage
  B. uplink
  C. unified uplink
  D. FCoE uplink
  D. FCoE uplink