Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 211:

  A network engineer must migrate a Cisco WSA virtual appliance from one physical host to another physical host by using VMware vMotion.

  What is a requirement for both physical hosts?

  A. The hosts must run Cisco AsyncOS 10.0 or greater.
  B. The hosts must have access to the same defined network.
  C. The hosts must run different versions of Cisco AsyncOS.
  D. The hosts must use a different datastore than the virtual appliance
  B. The hosts must have access to the same defined network.

• Question 212:

  Refer to the exhibit. Two data center fabrics use VPC data center interconnect. The system MAC value on SW1 is 00:23:04:ee:be:20.

  Which value must be set to configure the system MAC address?

  

  A. 00:23:04:ee:be:14 on SW3
  B. 00:23:04:ee:be:20 on SW3
  C. 00:23:04:ee:be:14 on SW2
  D. 46:43:32:e5:92:80 on SW2
  A. 00:23:04:ee:be:14 on SW3

• Question 213:

  Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?

  A. Fibre Channel traffic is monitored only on one vHBA per server.
  B. The destination port for monitoring must be an unassigned Fibre Channel port.
  C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
  D. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
  D. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.

  ---

  Explanation

  You can monitor Fibre Channel traffic using either a Fibre Channel traffic analyzer or an Ethernet traffic analyzer. When Fibre Channel traffic is monitored with an Ethernet traffic monitoring session, at an Ethernet destination port, the destination traffic is FCoE. The Cisco UCS 6300 Fabric Interconnect supports FC SPAN only on the ingress side. A Fibre Channel port on a Cisco UCS 6248 Fabric Interconnect cannot be configured as a source port.

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/System-Monitoring/3-2/b_UCSM_GUI_System_Monitoring_Guide_3_2/b_UCSM_GUI_System_Monitoring_Guide_3_2_chapter_01101.pdf

• Question 214:

  A network engineer deploys a cloud service for a customer. The customer wants complete control over the underlying operating system data and application.

  Which cloud service model must be used to accomplish this goal?

  A. Infrastructure in a service
  B. storage as a service
  C. platform as a service
  D. software as a service
  A. Infrastructure in a service

• Question 215:

  An engineer configures an Intersight Virtual Appliance and must claim over 200 targets. The engineer starts the Claim New Target Procedure. The engineer has prepared this initial comma-separated value file to provision the targets:

  UCSFI,10.1.1.3,user-1,pwd5516b917

  IMC,10.1.1.5/26,user-2,pwdc65b1c43f

  HX,10.1.2.1/30,user-3,pwd39913690

  UCSD,1.1.1.1.

  user-4,pwd5003e9d5 Which information must be included in the comma-separated value file to provision the targets?

  A. target type, hostname or IP address, user name, password
  B. location, address, name, password
  C. FQDN, AD name, IP address, email
  D. certificate, user name, password, email
  A. target type, hostname or IP address, user name, password

  ---

  Explanation

  For each target, add a line containing Target Type, Hostname or IP Address, User Name, and Password. Use the CIDR notation to specify the IP Range. You can add as many lines with these details in the .csv file.

  https://intersight.com/help/appliance/getting_started/claim_targets

• Question 216:

  An engineer must add a new VRF (DC DC) to the network that runs with Multiprotocol Border Gateway Protocol (MP-BGP) and EVPN.The requirement for the new VRF is to allow communication of network prefixes between PE1 and PE2.

  Which two sets of steps should be taken to complete the VRF configuration? (Choose two)

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  E. Option E
  B. Option B
  D. Option D

• Question 217:

  Refer to the exhibit.

  

  A Cisco Nexus Dashboard Fabric Controller has been deployed to manage the configuration of the LAN through the management interface Mgmt0 of a Cisco Nexus switch. The Cisco Nexus Dashboard data interface is Layer-2 adjacent to the Nexus switch Mgmt0 interface. Which IP address must be allocated to the Mgmt0 interface?

  A. 172.18.1.10/24
  B. 192.168.2.1/24
  C. 10.17.10.10/24
  D. 10.5.74 10/24
  C. 10.17.10.10/24

• Question 218:

  DRAG DROP

  Refer to the exhibit.

  

  Drag and drop the CLI commands from the bottom onto the boxes to complete the configuration needed to monitor the traffic flow that enters interface eth 3/1.

  Not all commands arc used.

  Select and Place:

  

  

• Question 219:

  Which action does Cisco UCS Manager perform during the firmware Auto-Install process?

  A. It downloads new firmware versions automatically.
  B. It checks compatibility with third-party software.
  C. It sends email notifications to administrators.
  D. It upgrades firmware and reboots necessary components.
  D. It upgrades firmware and reboots necessary components.

• Question 220:

  A Cisco UCS C-Series server needs to be installed in a data center.

  The server must be managed by using Cisco UCS Manager with a single cable for management and data traffic.

  Which set of commands must be run on the server after a physical connection is established?

  A. UCS-A# scope chassis 2 UCS-A /chassis # scope cmc UCS-A /chassis/cmc # scope mgmt-conn sideband UCS-A /chassis/cmc/mgmt-conn # mgmt-conn-state enabled UCS-A /chassis/cmc/mgmt-conn* # commit-buffer
  B. UCS-A# scope server 2 UCS-A /server # scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn # set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer
  C. UCS-A# scope chassis 2 UCS-A /chassis # scope cmc UCS-A /chassis/cmc # set mgmt-conn-state enabled UCS-A /chassis/cmc/mgmt-conn* # commit-buffer
  D. UCS-A# scope server 2 UCS-A /server # scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc # mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer
  B. UCS-A# scope server 2 UCS-A /server # scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn # set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

  ---