Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 151:

  DRAG DROP

  Refer to the exhibit.

  

  An engineer must capture Fibre Channel traffic from the server and the supervisor to the Cisco MDS 9000 Series Switch fabric.

  The traffic must be forwarded to the analyzer

  Drag and drop the code snippets from the right onto the blanks in the code on the left to complete the configuration. Not all code snippets are used.

  Select and Place:

  

  

• Question 152:

  A customer undergoes an IT security review assessment. The auditor must have read-only access to the Cisco Nexus 9000 Series Switch to perform the configuration review. The customer implements this security role for the auditor:

  role name audit

  rule 1 permit command *

  rule 2 - Output omitted -- username auditor password C4SAFF1B05EB1968$c0 role audit Which configuration snippet must complete the configuration?

  A. deny command configure terminal
  B. deny command write *
  C. permit command show *
  D. permit command enable
  A. deny command configure terminal

• Question 153:

  A network engineer must restore the configuration of a Cisco Nexus 9300 Series Switch.

  The backup file is stored on an external server.

  The current configuration must be replaced without having to reload the switch.

  Which command must be used to accomplish this goal?

  A. Nexus01# copy tftp://10.10.1.1/config.back running-config
  B. Nexus01(config)# configure replace scp://10.10.1.1/config.back
  C. Nexus01(config)# boot tftp://10.10.1.1/config.back
  D. Nexus01# rollback running-config checkpoint pre-change atomic
  B. Nexus01(config)# configure replace scp://10.10.1.1/config.back

• Question 154:

  A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack Server. The power redundancy must support two power sources being used to power the server.

  Which configuration should be applied to meet the requirement?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  B. Option B

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Server-Mgmt/3-1/b_Cisco_UCS_Manager_Server_Mgmt_CLI_Guide/power_mgmt.html

  The command "N+1" is invalid. The command should be "n-plus-1"

  

• Question 155:

  An engineer must analyze packets arriving from a server port on a Cisco Nexus 9000 Series Switch. The packet sniffer is located on a different switch from the one the server is currently connected to. The packet capture must meet these requirements:

  It must capture all incoming packets on the switch port.

  It must capture the first 1000 bytes of the packet to conserve bandwidth.

  Which action must be taken to meet these requirements?

  A. Configure the marker-packet to 1000.
  B. Implement an ACL with the packet-length of 1000.
  C. Enable the MTU size of 1000.
  D. Set rate-limiting to 1000.
  B. Implement an ACL with the packet-length of 1000.

• Question 156:

  A Cisco UCS C-Series server is installed at a data center. The server should be managed by the Cisco UCS Manager by using a single cable for management and data traffic.

  Which configuration should be applied after the physical connection is established?

  A. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc # mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer
  B. UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis/cimc # scope mgmt-conn sideband UCS-A /chassis/cimc/mgmt-conn # mgmt-conn-state enabled UCS-A /chassis/cimc/mgmt-conn* # commit-buffer
  C. UCS-A# scope chassis 1 UCS-A /chassis# scope cimc UCS-A /chassis /cimc # set mgmt-conn-state enabled UCS-A /chassis /cimc/mgmt-conn* # commit-buffer
  D. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer
  D. UCS-A# scope server 1 UCS-A /server# scope cimc UCS-A /server/cimc # scope mgmt-conn sideband UCS-A /server/cimc/mgmt-conn #set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer

  ---

  Explanation

  UCS-A# scope server 1

  UCS-A /server # scope cimc UCS-A /server/cimc # scope mgm UCS-A /server/cimc # scope mgmt-conn UCS-A /server/cimc # scope mgmt-conn sideband

  UCS-A /server/cimc/mgmt-conn # set mgmt-conn-state enabled UCS-A /server/cimc/mgmt-conn* # commit-buffer UCS-A /server/cimc/mgmt-conn

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm3-1/b_C-Series-Integration_UCSM3-1/b_C-Series-Integration_UCSM3-1_chapter_010.html

• Question 157:

  An engineer is implementing the Cisco ACI fabric and wants to reduce the amount of TCAM resources consumed by the fabric.

  The engineer also needs to ensure that all EPGs m a VRF consume the same services Which action should be taken to meet these requirements?

  A. Configure a single contract provided and consumed in all EPGs
  B. Configure preferred groups in the VRF for al EPGs
  C. Implement an unenforced VRF
  D. Implement vzAny feature
  D. Implement vzAny feature

• Question 158:

  In a data center based on Cisco Nexus 9000 Series Switches, all endpoints support explicit congestion notifications.

  How does the Nexus switch respond when the ECN-enabled queue reaches the maximum WRED threshold?

  A. All the outgoing packets are marked.
  B. Low-priority incoming packets are dropped
  C. A congestion notification packet is sent to the sender
  D. A pause frame is sent to the source.
  A. All the outgoing packets are marked.

• Question 159:

  A network administrator must configure an extra keyring in Cisco UCS Manager. The key must provide a high level of encryption and secure authentication when users use the web interface.

  Which configuration command set must be applied to meet these requirements?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  B. Option B

  ---

  Explanation

  UCS-A# scope system

  UCS-A /system # scope services UCS-A /system/services # enable https UCS-A /system/services* # set https port 443

  Warning: When committed, this closes all the web sessions.

  UCS-A /system/services* # set https keyring kring7984 UCS-A /system/services* # set https cipher-suite-mode high UCS-A /system/services* # set https ssl-protocol tls1-2 UCS-A /system/services* # commit-buffer

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1/b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1_chapter_0110.html

• Question 160:

  An engineer must export the Cisco UCS Manager configuration for backup purposes. The requirement is to export the configuration that contains the AAA and RBAC configuration. Also the file must be stored a human-readable format.

  Much backup type must be selected to meet these requirements?

  A. logical configuration
  B. system configuration
  C. fun state
  D. all configuration
  A. logical configuration