Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 341:

  Refer to the exhibit.

  

  When you assign this disk policy to Server 1/1, it fails. Which option describes the reason for this failure?

  A. The RAID controller does not support single disk configurations.
  B. Only RAID0 and RAID1 are supported.
  C. The server is equipped with a local disk.
  D. Protection is enabled on the existing disk.
  C. The server is equipped with a local disk.

• Question 342:

  Which statement about the converged network adapter is true?

  A. The converged network adapter is a multifunction adapter that combines the functions of Ethernet NICs and Fibre Channel host bus adapters.
  B. The converged network adapters are compatible only with Cisco UCS.
  C. The converged network adapter is a virtualized multifunction adapter that combines the functions of Ethernet NICs and iSCSI on the same card.
  D. The converged network adapter is a multifunction adapter that works with multiple network speeds and duplex settings, and it supports several storage and network protocols.
  A. The converged network adapter is a multifunction adapter that combines the functions of Ethernet NICs and Fibre Channel host bus adapters.

• Question 343:

  Which two statements about end-host mode in SAN connectivity in a Cisco UCS environment are true? (Choose two.)

  A. End-host mode is synonymous with NPV mode.
  B. In end-host mode, only hard pinning of vHBAs to Fibre Channel uplink ports is allowed.
  C. Making configuration changes between Fibre Channel switching mode and end-host mode is nondisruptive.
  D. End-host mode is the default Fibre Channel switching mode.
  A. End-host mode is synonymous with NPV mode.
  D. End-host mode is the default Fibre Channel switching mode.

• Question 344:

  Drag Drop

  Select and Place:

  

  

• Question 345:

  Which statement about the SAN Extension Tuner is true?

  A. The SET configuration is persistent across reboots.
  B. The virtual N Ports that are created will register the FC4 features that are supported with the name server.
  C. Only SCSI read and write commands are implemented.
  D. SET cannot be used if iSCSI is enabled.
  E. The data pattern that is used for the data that is generated between the virtual N Ports can be an all-zero pattern or an all-ones pattern. No other data patterns can be used.
  C. Only SCSI read and write commands are implemented.

• Question 346:

  What is the maximum combination of static vNICs and vHBAs for Cisco UCS Manager version 2.1 when using ESX 5.1?

  A. 18 eNICs and 8 fNICs
  B. 24 eNICs and 8 fNICs
  C. 12 eNICs and 8 fNICs
  D. 18 eNICs and 9 fNICs
  A. 18 eNICs and 8 fNICs

• Question 347:

  Which statement describes the graceful restart capability in Cisco NX-OS Software?

  A. In NX-OS Software, the OSPFv2 graceful restart extension is Cisco proprietary and is only compatible with other Cisco routers.
  B. A graceful restart allows OSPFv2 to remain in the data forwarding path through a process restart. When OSPFv2 needs to restart, it first sends a type 8 LSA, which includes a grace period that tells NSF helpers to keep all LSAs that originated from the restarting interface.
  C. Graceful restart helps keep an NX-OS system forwarding traffic transparently even if it experiences a cold reboot.
  D. If the restarting OSPFv2 interface does not come back up before the end of the grace period, or if the network experiences a topology change, the OSPFv2 neighbors tear down adjacency with the restarting OSPFv2 interface and treat it as a normal OSPFv2 restart.
  E. OSPFv3 graceful restart must be disabled before doing an ISSU.
  D. If the restarting OSPFv2 interface does not come back up before the end of the grace period, or if the network experiences a topology change, the OSPFv2 neighbors tear down adjacency with the restarting OSPFv2 interface and treat it as a normal OSPFv2 restart.

• Question 348:

  Which Cisco Nexus 1000v switch CLI command is used to verify the connection between the Cisco Nexus 1000v Series switch and Vmware?

  A. show module
  B. show svd console
  C. show svs connections
  D. show svs domain
  E. show svd domain
  C. show svs connections

• Question 349:

  Refer to the exhibit.

  

  What is the most likely reason that VSAN 88 is initializing?

  A. VSAN 88 is not mapped to a FCoE VLAN.
  B. No host has logged into the VSAN.
  C. The VSAN is shut down.
  D. VSAN 88 is not part of the trunk yet.
  B. No host has logged into the VSAN.

• Question 350:

  On the Cisco Nexus 7000 Series Switch, Control Plane Policing is enforced on which component?

  A. The supervisor module enforces CoPP before out-of-policy traffic reaches the CPU
  B. The fabric modules enforce CoPP in the fabric before out-of-policy traffic reaches the CPU
  C. The linecards enforce CoPP locally before out-of-policy traffic reaches the CPU
  D. The egress virtual output queue enforces CoPP locally before out-of-policy traffic reaches the CPU
  C. The linecards enforce CoPP locally before out-of-policy traffic reaches the CPU