Cisco 350-001 Online Practice Questions and Exam Preparation

Cisco 350-001 Online Questions & Answers

• Question 421:

  Apart from interdomain multicast routing, what else is MSDP used for?

  A. Source Specific Multicast and IGMPv2
  B. Announcing multicast sources to BGP speakers
  C. Anycast RP
  D. Intradomain multicast routing
  C. Anycast RP

• Question 422:

  When receiving information from redistributed routes, a router will use all of these factors when building its routing table except for which one?

  A. Routing protocol process ID
  B. Administrative distance
  C. IP prefix lists
  D. The route metric
  E. Prefix length
  A. Routing protocol process ID

• Question 423:

  Which two options does Cisco PfR use to control the entrance link selection with inbound optimization? (Choose two.)

  A. Prepend extra AS hops to the BGP prefix.
  B. Advertise more specific BGP prefixes (longer mask).
  C. Add (prepend) one or more communities to the prefix that is advertised by BGP.
  D. Have BGP dampen the prefix.
  A. Prepend extra AS hops to the BGP prefix.
  C. Add (prepend) one or more communities to the prefix that is advertised by BGP.

• Question 424:

  Which types of prefixes will a router running BGP most likely advertise to an IBGP peer, assuming it is not configured as a route reflector?

  A. prefixes received from any other BGP peer and prefixes locally originated via network statements or redistributed
  B. all prefixes in its routing table
  C. prefixes received from EBGP peers and prefixes locally originated via network statements or redistributed
  D. prefixes received from EBGP peers and prefixes received from route reflectors
  E. prefixes received from other IBGP peers, prefixes received from EBGP peers, and prefixes redistributed to BGP
  F. prefixes received from other IBGP peers and prefixes received from route reflectors
  C. prefixes received from EBGP peers and prefixes locally originated via network statements or redistributed

• Question 425:

  Refer to the exhibit. In this network, all routers are configured to place all interfaces shown in OSPF Area0. If you examined the OSPF database on R4, what would the network (type 2) LSA generated by R3 contain?

  A. A connection to 10.1.5.0/24, and links to R3, R2, and R1
  B. A connection to 10.1.5.0/24, and links to R2 and R1
  C. Connections to 10.1.5.0/24 and 10.1.1.0/31
  D. R3 would not generate a network (type 2) LSA in this network.
  A. A connection to 10.1.5.0/24, and links to R3, R2, and R1

• Question 426:

  Refer to the exhibit.

  

  AS65000 has core network P1 - P6. The eBGP peers to another AS are through ASBR1A. ASBR1, ASBR2 and ASBR3, ASBR4, since they have eBGP peers to another AS
  B. P1, since it is in the center of the MPLS network
  C. a new pair of routers (RR1, RR2) dedicated as VPNv4 RR connected to P1, P2 since they are off the path
  D. in MPLS L3VPN, there is no requirement to have VPNv4 RR

  C. a new pair of routers (RR1, RR2) dedicated as VPNv4 RR connected to P1, P2 since they are off the path

• Question 427:

  Refer to the exhibit. R4 is configured as a receive-only EIGRP stub, and is adjacent with 209.165.202.139 (R3). However, R4 is not learning about network 209.165.201.0/27 from R3. What could be the cause of this issue?

  

  A. R4 should learn this route from 209.165.200.242, and not from R3.
  B. R3 is configured as a receive-only EIGRP stub.
  C. R3 and R4 may be using different EIGRP process numbers.
  D. R3 and R4 are asymmetrically adjacent neighbors.
  B. R3 is configured as a receive-only EIGRP stub.

• Question 428:

  What action will a BGP route reflector take when it receives a prefix marked with the community attribute NO ADVERTISE from a client peer?

  A. It will advertise the prefix to all other client peers and non-client peers.
  B. It will not advertise the prefix to EBGP peers.
  C. It will only advertise the prefix to all other IBGP peers.
  D. It will not advertise the prefix to any peers.
  D. It will not advertise the prefix to any peers.

• Question 429:

  Which statement is correct about an OSPF sham-link?

  A. A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
  B. A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
  C. A sham-link is a logical link between PE routers that carries OSPF LSAs and forwards customer traffic across it.
  D. A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.
  E. A sham-link is a point-to-multipoint link that provides an OSPF adjacency between the PE routers and forwards customer traffic across it.
  B. A sham-link is a logical link between PE routers that provides an OSPF adjacency between the PE routers and carries OSPF LSAs.

• Question 430:

  Which information will the Cisco IOS command show ip ospf rib display?

  A. only the local OSPF routes
  B. only the OSPF routes installed in the routing table
  C. only the remotely learned OSPF routes
  D. all the OSPF routes from the OSPF database that are eligible to be put in the routing table
  D. all the OSPF routes from the OSPF database that are eligible to be put in the routing table