Cisco 350-001 Online Practice Questions and Exam Preparation

Cisco 350-001 Online Questions & Answers

• Question 101:

  Refer to the exhibit. Based on the above commands, when will the output of the show log command be saved?

  

  A. Each time the total CPU utilization goes below 50 percent
  B. Each time the total CPU utilization goes above 80 percent
  C. Every 5 minutes while the total CPU utilization is above 80 percent
  D. Every 5 seconds while the total CPU utilization is above 80 percent
  E. Every 5 minutes while the total CPU utilization is below 50 percent
  F. Every 5 seconds while the total CPU utilization is below 50 percent
  D. Every 5 seconds while the total CPU utilization is above 80 percent

• Question 102:

  Refer to the exhibit. The Layer 2 network uses VTP to manage its VLAN database. A network designer created all VLANs on the VTP server (switch 1) and it has been advertised through VTP to all other VTP clients (switches 2 through 4). Due to network growth, a network operator decided to add a new switch between switch 1 and switch 3. The network operator has been instructed to use a refurbished switch and use a VTP client. Which three of these has been instructed to use a refurbished switch and use a VTP client.

  Which three of these factors should the network operator consider to minimize the impact of adding a new switch? (Choose three.)

  

  A. Pay special attention to the VTP revision number, because the higher value takes the priority.
  B. Configure all VLANs manually on the new switch in order to avoid connectivity issues.
  C. A trunk should be established between the new switch and switches 1 and 3 as VTP only runs over trunk links.
  D. Set at least the VTP domain name and password to get the new switch synchronized.
  E. An ISL trunk should be established between the new switch and switches 1 and 3, because VTP only runs over ISL.
  F. Pay special attention to the VTP revision number, because the lower value takes the priority.
  A. Pay special attention to the VTP revision number, because the higher value takes the priority.
  C. A trunk should be established between the new switch and switches 1 and 3 as VTP only runs over trunk links.
  D. Set at least the VTP domain name and password to get the new switch synchronized.

• Question 103:

  Refer to the exhibit. Voice traffic is marked "precedence 5."

  How much bandwidth is allocated for voice traffic during periods of congestion?

  

  A. a minimum of 48 kb/s
  B. a maximum of 48 kb/s
  C. a minimum of 48% of the available bandwidth
  D. a maximum of 48% of the available bandwidth
  B. a maximum of 48 kb/s

• Question 104:

  Refer to the exhibit.

  

  

  Which two statements are correct? (Choose two.)

  A. The packet is received on the private interface.
  B. Zone-Based Firewall is configured on the router.
  C. Logging is enabled for the access list.
  D. Private is an identification of that ACE.
  E. The Telnet connection is successfully set up.
  C. Logging is enabled for the access list.
  D. Private is an identification of that ACE.

• Question 105:

  As a network administrator, can you tell me what the root guard feature provides in a bridged network?

  A. It ensures that BPDUs sent by the root bridge are forwarded in a timely manner
  B. It enforces the root bridge placement in the network
  C. It ensures that all ports receiving BPDUs from the root bridge are in the forwarding state.
  D. It ensures that the bridge is elected as root bridge in the network.
  B. It enforces the root bridge placement in the network

• Question 106:

  You are the network administrator of a large Layer 2 network. At certain times during the day, users complain that the network is responding very slowly. When troubleshooting the issue, you notice the election of a new root bridge with an unknown MAC address. Knowing that all access ports have the PortFast feature enabled, what should be done to resolve the issue without losing redundant links?

  A. Enable bpduguard globally.
  B. Enable rootguard.
  C. Enable loopguard.
  D. Enable spanning tree.
  E. Enable UDLD.
  A. Enable bpduguard globally.

• Question 107:

  How does an IPv6 router deal with a packet that is larger than the outgoing interface MTU?

  A. It will fragment the packet at Layer 2.
  B. It will fragment the packet at Layer 3.
  C. It will drop the packet and send an ICMPv6 message "packet too big" back to the source.
  D. It will drop the packet.
  C. It will drop the packet and send an ICMPv6 message "packet too big" back to the source.

• Question 108:

  Which two IPv6 address pairs can be assigned on a point-to-point link with a /125 mask? (Choose two.)

  A. 2001:DB8::1 and 2001:DB8::2
  B. 2001:DB8::9 and 2001:DB8::10
  C. 2001:DB8::10 and 2001:DB8::17
  D. 2001:DB8::1 and 2001:DB8::18
  A. 2001:DB8::1 and 2001:DB8::2
  C. 2001:DB8::10 and 2001:DB8::17

• Question 109:

  Which two of these are benefits of applying WRED? (Choose two.)

  A. provides minimal bandwidth guarantees
  B. provides bounded low latency
  C. helps to avoid TCP synchronization
  D. completely eliminates congestion
  E. allows a different drop profile to be manually enabled for each IP precedence or DSCP
  C. helps to avoid TCP synchronization
  E. allows a different drop profile to be manually enabled for each IP precedence or DSCP

• Question 110:

  Which one of the following potential issues is eliminated by using split horizon?

  A. Joined horizons
  B. Packet forwarding loops
  C. cisco Express Forwarding load-balancing inconsistency
  D. Asymmetric routing throughout the network
  B. Packet forwarding loops