Cisco 300-625 Online Practice Questions and Exam Preparation

Cisco 300-625 Online Questions & Answers

• Question 51:

  A network engineer is configuring a Cisco MDS switch for FCoE. Which two conditions must be considered during the implementation phase? (Choose two.)

  A. On Cisco MDS switches, system-defined class maps for class-FCoE and class-default are enabled but can be deleted.
  B. The QoS policy must be identical to other Cisco FCoE switches in the network.
  C. On the Cisco MDS, the MTU is set equal to 2112.
  D. VLAN 1 or the native VLAN can be mapped to an FCoE VSAN.
  E. FCoE is already enabled on a Cisco MDS switch.
  B. The QoS policy must be identical to other Cisco FCoE switches in the network.
  E. FCoE is already enabled on a Cisco MDS switch.

• Question 52:

  A storage network engineer is implementing disk-array data replication between two SAN environments in two different data centers not connected via Fibre Channel. Which SAN switch feature must be implemented?

  A. FCIP
  B. zoning merge over LAN
  C. VSAN scoping
  D. IVR
  A. FCIP

• Question 53:

  A storage administrator is connecting two previously configured switches to make a single fabric. When the E Ports are connected, the administrator sees a ZONE MERGE FAILURE message referring to the zoneset for VSAN 10 on each switch. Which command should the administrator use to allow these switches to work together?

  A. zoneset import interface fc1/1 vsan 10
  B. zoneset distribute full vsan 10
  C. zoneset overwrite-control vsan 10
  D. zoneset copy active-zoneset full-zoneset
  A. zoneset import interface fc1/1 vsan 10

• Question 54:

  Refer to the exhibit.

  

  A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?

  A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A. 2. shut/no shut interface fc1/11 on MDS-A.
  B. 1. Deactivate zone set Zoneset10-A on MDS-A. 2. shut/no shut interface fc1/11 on MDS-A.
  C. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A. 2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range.
  D. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command. 2. Activate the zone set Zoneset10-A.
  A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A. 2. shut/no shut interface fc1/11 on MDS-A.

• Question 55:

  Refer to the exhibit.

  

  What is the result of merging the fabric?

  A. The merged fabric IVR VSAN topology is set to activate.
  B. The merged fabric has NAT enabled.
  C. The merge is invalid.
  D. The merged fabric contains only service group Group1.
  D. The merged fabric contains only service group Group1.

• Question 56:

  What is the effect of a non-graceful virtual machine shutdown on a virtualized server that is connected to a SAN with Fibre Channel interfaces?

  A. NP Port reload connected to the upstream SAN switch
  B. out-of-service Fibre Channel interfaces on the SAN switch
  C. frames stuck in the storage system
  D. frames stuck in the HBA buffer of the server
  B. out-of-service Fibre Channel interfaces on the SAN switch

• Question 57:

  Which condition requires using a device alias rather than a Fibre Channel alias?

  A. The zone database must be distributed over the fabric.
  B. The same alias must be used in zoning as well as DPVM.
  C. All aliases being used are being configured in the same VSAN.
  D. Aliases must be saved within a central database on the fabric.
  A. The zone database must be distributed over the fabric.

• Question 58:

  What is the function of the 0xFFFFFC address in a Fibre Channel fabric?

  A. management server
  B. fabric controller
  C. name server
  D. time server
  C. name server

• Question 59:

  Which benefit of upgrading to the Cisco DCNM server-based advanced feature license for a Cisco MDS switch is correct?

  A. The license can be reassigned when a switch is replaced with a newer version within the same product family.
  B. The license can be assigned to either server MAC address or switch serial number.
  C. An unlimited number of devices can be added to the list of licensed devices.
  D. The license can be reassigned when the switch is replaced with a Cisco Nexus switch.
  A. The license can be reassigned when a switch is replaced with a newer version within the same product family.

• Question 60:

  A storage administrator is configuring inter-VSAN routing on a fabric that contains duplicate domain IDs. Which feature must be configured to ensure continued operation?

  A. auto topology
  B. transit VSANs
  C. IVR NAT
  D. virtual domains
  C. IVR NAT