Cisco 300-625 Online Practice Questions and Exam Preparation

Cisco 300-625 Online Questions & Answers

• Question 31:

  A storage network engineer is upgrading a Cisco MDS Director with dual supervisor modules. The install command is executed on the standby supervisor module but fails. Which action would have prevented this failure?

  A. All FCoE interfaces configured on the MDS must be shut down before starting the upgrade.
  B. The upgrade must be done on the active supervisor module only.
  C. Cisco Fabric Services must be disabled before starting the upgrade.
  D. Fabric Controller Service must be stopped before starting the upgrade.
  B. The upgrade must be done on the active supervisor module only.

• Question 32:

  A domain ID conflict is detected on a switch. Which action resolves the issue in the shortest possible time after the preferred domain ID is changed to a static domain ID?

  A. Issue an fcdomain disruptive restart.
  B. Issue an fcdomain nondisruptive restart.
  C. Enter the commands for a VSAN suspend / no-suspend.
  D. Enter the commands to complete a domain manager fast restart.
  A. Issue an fcdomain disruptive restart.

• Question 33:

  Refer to the exhibit.

  

  A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch. Which action is required for the configuration to give permission to the new colleague?

  A. permit vsan 1-1000 must be configured as rule 5.
  B. permit vsan 1-1000 must be configured as rule 1.
  C. permit vsan 1-1000 must be configured under the VSAN policy deny.
  D. permit vsan 1-1000 must be configured under the VSAN policy allow.
  C. permit vsan 1-1000 must be configured under the VSAN policy deny.

• Question 34:

  A Cisco MDS Series Switch with the POAP feature boots and does not find the startup configuration. Which location is checked first when the switch enters POAP mode?

  A. USB device that contains the software image files and the switch configuration file
  B. DHCP server to bootstrap the interface IP address, gateway, DNS server, and TFTP IP addresses
  C. TFTP server where the necessary configuration files are downloaded
  D. HTTP server where the URL is used to download the software image
  A. USB device that contains the software image files and the switch configuration file

• Question 35:

  A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch. Why is the new server failing to connect?

  A. The fabric data plane resets as part of the upgrade process.
  B. The new server is unable to log in to the fabric to receive an FC-ID.
  C. The upgrade process disables any currently unused ports.
  D. The zoning database is locked during the upgrade process.
  D. The zoning database is locked during the upgrade process.

• Question 36:

  A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?

  A. NTP must be configured on all devices or the configuration fails.
  B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
  C. All switches on the fabric must be configured for the same password.
  D. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
  B. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.

• Question 37:

  After a subordinate switch requests a domain ID form a principal switch, the requested domain ID becomes the runtime domain ID, and all interfaces on the affected VSAN are isolated. What is a solution to the issue?

  A. Add the received ID to the allowed list.
  B. Configure a static domain on the subordinate switch and reboot the switch.
  C. Enable the FICON feature on the affected VSAN.
  D. Configure IVR NAT on the affected VSAN.
  A. Add the received ID to the allowed list.

• Question 38:

  A storage network engineer is implementing SAN telemetry for a SAN infrastructure using Cisco DCNM for SAN. Which command is used to check the session status for telemetry operation?

  A. show telemetry pipeline stats
  B. show telemetry transport
  C. show telemetry control stats
  D. show analytics system-load
  B. show telemetry transport

• Question 39:

  After user account attributes are modified in Cisco NX-OS, when do changes to the user's session attributes take effect?

  A. immediately
  B. at the scheduled time
  C. when the user logs out of a session
  D. when the user creates a new session
  D. when the user creates a new session

• Question 40:

  DRAG DROP

  Drag and drop the FLOGI parameters from the left onto the descriptions from which they were-derived on the right.

  Select and Place: