Cisco 300-175 Online Practice Questions and Exam Preparation

Cisco 300-175 Online Questions & Answers

• Question 401:

  Scenario

  In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.

  Instructions

  To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.

  

  

  Refer to the screenshot in Exhibit 2. Which item is true about Boot Order in Cisco UCS -Series Rack Servers?

  A. Boot order configured in the BIOS will not be reflected in the Cisco IMC GUI.
  B. Boot options should not be disabled in the BIOS.
  C. The Boot Order set in the BIOS does not override the Cisco IMC.
  D. Boot Order should only be configured in the Cisco IMC GUI.
  A. Boot order configured in the BIOS will not be reflected in the Cisco IMC GUI.

• Question 402:

  Which Two Methods does Cisco UCS Manager use to create a fabric port channel? (Chose Two)

  A. By using the chassis connectivity policy settings for a spesific chassis after chassis discovery
  B. By using the LAN connectivity policy settings during chassis discovery
  C. By using the SAN policy settings during chassis discovery
  D. By using the global chassis discovery policy settings
  E. By using the lan connectivity policy settings for a spesific interface after chassis discovery
  A. By using the chassis connectivity policy settings for a spesific chassis after chassis discovery
  D. By using the global chassis discovery policy settings

  ---

  Fabric port channels allow you to group several of the physical links from an IOM to a fabric interconnect into one logical link for redundancy and bandwidth sharing. As long as one link in the fabric port channel remains active, the fabric port

  channel continues to operate.

  If the correct hardware is connected, fabric port channels are created byCisco UCS Managerin the following ways:

  During chassis discovery according to the settings configured in the chassis discovery policy.

  After chassis discovery according to the settings configured in the chassis connectivity policy for a specific chassis.

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/

  b_UCSM_GUI_Configuration_Guide_2_0_chapter_0101.html#concept_5D3D88341BFB43468B62B5A77876C67B

• Question 403:

  Which of the following is true concerning Fibre Channel communications on a Cisco Unified Computing System?

  A. Each VSAN requires a dedicated VLAN to carry FCoE traffic.
  B. FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System Manager.
  C. FCoE VLANs may overlap with Ethernet VLANs.
  D. Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.
  A. Each VSAN requires a dedicated VLAN to carry FCoE traffic.

• Question 404:

  Which BIOS setting is required for a VMware ESXi 5.0 host to support Cisco VM-FEX universal pasthrough mode?

  A. VT for Directed IO
  B. ACPI 10 Support
  C. VEMDPA Agent
  D. Execute Disabled Bit
  E. Processor C State
  A. VT for Directed IO

• Question 405:

  Under which condition can you select the option to "remove" a blade server from within the Cisco UCS Manager?

  A. The server has been decommissioned before physical removal.
  B. The server has been sent a diagnostic interrupt.
  C. The server has been physically removed before decommission.
  D. The server has been powered down.
  C. The server has been physically removed before decommission.

• Question 406:

  You are connecting a Fibre Channel storage array to Cisco UCS What is a prerequisite to configuring Fibre Channel traffic ?

  A. The VSAN requires a dedicated FCoE VLAN
  B. The VSAN ID must match the FCoE VLAN ID
  C. The VSAN ID must differ from the VLAN ID
  D. The VLANs and the FCoE VLANs can have the same ID
  A. The VSAN requires a dedicated FCoE VLAN

• Question 407:

  Which virtual hardware version is required for a VM to enter the Cisco VM-FEX universal passthrough mode?

  A. Version 5
  B. Version 6
  C. Version 7
  D. Version 8
  E. Version 9
  D. Version 8

• Question 408:

  You are configuring HTTPS access to Cisco UCS Manager. You create a key ring, you issue a certificate request for the key ring, and you create the certificate request for the key ring. You discover that you still receive untrusted connection

  messages when connecting to Cisco UCS Manager from a Firefox browser and a Google Chrome browser.

  What should you do to resolve the issue?

  A. Create a trusted point.
  B. Obtain a validated certificate from Cisco.
  C. Use only the Microsoft Internet Explorer browser.
  D. Sign the certificate by using Cisco UCS Manager.
  A. Create a trusted point.

  ---

  https://www.derekseaman.com/2012/04/install-trusted-ssl-certificate-in.html https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/ b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_0110.html#concept_6C39A204B75C4B6F99FBE1389BE66E1F

• Question 409:

  Which two are true with respect to the upgrade process for the Cisco Unified Computing System? (Choose two.)

  A. For easier manageability, Cisco provides one full bundle that contains the firmware images for all Cisco Unified Computing System components.
  B. You can choose from FTP, TFTP, SCP, and HTTP to copy the bundle image from a remote file system.
  C. When the bundle image is downloaded, it must be transferred to the flash file system of the active fabric interconnect.
  D. When the download is successful, Cisco Unified Computing System Manager expands the individual files from the archive and installs them in the correct flash file system partition.
  E. It is strongly recommended that you activate all components in all chassis at one time.
  F. The I/O module, CIMC, and adaptors update process operates strictly on the backup partition of Flash for a given component.
  C. When the bundle image is downloaded, it must be transferred to the flash file system of the active fabric interconnect.
  F. The I/O module, CIMC, and adaptors update process operates strictly on the backup partition of Flash for a given component.

• Question 410:

  Scenario

  In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.

  Instructions

  To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.

  

  

  Refer to the Exhibit 3 screenshot of UCS Manager. Which two items are required to configure an IPMI profile? (Choose two.)

  A. IPMI Type
  B. User
  C. Role
  D. Locale
  E. Administrative State
  B. User
  C. Role

  ---

  http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0 1 1100.html#d129007e3491a1635