Cisco 300-175 Online Practice Questions and Exam Preparation

Cisco 300-175 Online Questions & Answers

• Question 241:

  You are configuring Cisco UCS connectivity. Which mode uses the LOM port to carry management traffic only?

  A. Dual-wire management
  B. Direct connect
  C. SingleConnect
  D. In-band
  A. Dual-wire management

• Question 242:

  Which two factors determine the recommended maximum number of virtual interfaces on a Cisco UCS system? (Choose two.)

  A. the number of compute blades in the system
  B. the number of interfaces sharing the uplinks
  C. the driver version on the OS running on the compute blade
  D. the number of uplinks between I/O Module and Fabric Interconnect
  C. the driver version on the OS running on the compute blade
  D. the number of uplinks between I/O Module and Fabric Interconnect

  ---

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-0-2/ b_UCSM_202_C-Integration/b_UCSM_202_C- Integration_chapter_01.html#reference_7F381038303B4825ACD303765905086A The number of uplinks between I/O Module and Fabric Interconnect https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/Reference- Docs/ Configuration-Limits/3-1/b_UCS_Configuration_Limits_3_1.html the driver version on the OS running on the compute blade

• Question 243:

  DRAG DROP

  You are integrating a data center infrastructure into Cisco UCS Director You must configure each infrastructure component by using the correct account type. Drag and drop the account types from the left onto the correct infrastructure components on the right.

  Select and Place:

  

  

• Question 244:

  You are implementing a UCS B-Series environment for a customer with both bare-metal and virtualized servers.

  The bare-metal servers require two vNICs and two vHBAs. Administrators of virtualized servers will be utilizing VN-Link technology.

  Which adapter should be recommended?

  A. Cisco UCS M81KR
  B. Cisco UCS M72KR-Q
  C. Cisco UCS M71KR-E
  D. Cisco UCS P81E
  E. Cisco UCS M51KR-B
  A. Cisco UCS M81KR

  ---

  M81KR (supports many adapters and VN-LINK)

  https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/ data_sheet_c78-525049.html M72KR-Q (supports only one adapter, does not support VN-LINK)

  https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/ data_sheet_c78-623738.html M71KR-E (supports only one adapter, does not support VN-LINK)

  https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade-servers/ data_sheet_c78-703582.html P81E (supports many adapters, does not support VN-LINK)

  https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-c-series-rack-servers/ data_sheet_c78-558230.html

  M51KR-B (this is not a converged network adapter CNA, and does not support vHBAs)

  https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-b-series-blade- servers/spec_sheet_c17-644236.pdf

• Question 245:

  Refer to the exhibit. Based on the output, which statement about the fabric interconnect is true?

  

  A. The fabric interconnect floods multicast traffic in VLAN 100.
  B. 10 groups in the fabric interconnect have been configured for VLAN 100 access.
  C. After adding VLAN 100, no other changes were made.
  D. IGMP snooping was enabled by the admin for VLAN 100.
  D. IGMP snooping was enabled by the admin for VLAN 100.

• Question 246:

  Which FEX connection mode do you use to pin the server-facing FEX ports to the connected uplink ports when the FEX is discovered?

  A. port channel
  B. soft pinning
  C. hard pinning
  D. vPC
  C. hard pinning

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-1/b_UCSM2-1_C-Integration/b_UCSM2-1_C-Integration_chapter_01.html

• Question 247:

  Which two descriptions of a WWN pool are true? (Choose two.)

  A. a collection of WWNs for use by the iSCSI interfaces in a Cisco UCS instance
  B. a collection of Ethernet MAC addresses assigned to the Ethernet adapters in a Cisco UCS instance
  C. a pool of WW port names, where WWPN is the port name assigned to the Fibre Channel port on the adapter
  D. a collection of management IP addresses used to connect to servers
  E. a pool of WW node names, where WWNN belongs to the node
  C. a pool of WW port names, where WWPN is the port name assigned to the Fibre Channel port on the adapter
  E. a pool of WW node names, where WWNN belongs to the node

  ---

  http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-3-1/b_UCSM_GUI_Configuration_Guide_1_3_1/UCSM_GUI_Configuration_Guide_1_3_1_chapter 22.html

• Question 248:

  You must implement a Dynamic FCoE topology that uses ECMP. Which ancillary technology do you use?

  A. OTV
  B. VXLAN
  C. FabricPath
  D. EIGRP
  C. FabricPath

• Question 249:

  Which two items can you provision in a vHBA Template? (Choose two.)

  A. Max Data Field Size
  B. SCSI I/O Queues
  C. FCoE VLAN
  D. vHBA Interrupt Mode
  E. Stats Threshold Policy
  F. FLOGI Timeout
  A. Max Data Field Size
  E. Stats Threshold Policy

• Question 250:

  Refer to the exhibit. What is the result of committing the configuration?

  

  A. A new boot table entry takes effect immediately
  B. The LUN ID is set to 2
  C. LUN ID associations are retained until the server reboots
  D. LUN ID associations are retained until they are removed manually
  D. LUN ID associations are retained until they are removed manually

  ---

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/cli/config/guide/1-2-1/b_Cisco_CIMC_CLI_Configuration_Guide_1_2_1/Cisco_CIMC_CLI_Configuration_Guide_1_2_1_chapter8.html