Cisco 300-175 Online Practice Questions and Exam Preparation

Cisco 300-175 Online Questions & Answers

• Question 221:

  Which of the following are true concerning authentication within a Cisco Unified Computing System?

  A. Authentication domains are used to leverage individual authentication systems.
  B. You can create up to 64 authentication domains, each associated with a provider group and realm in Cisco Unified Computing System Manager.
  C. At login, the user can select the authentication domain to be used.
  D. Cisco Unified Computing System supports LDAP or RADIUS for remote authentication.
  E. A locally authenticated user account is authenticated directly through the fabric interconnect.
  E. A locally authenticated user account is authenticated directly through the fabric interconnect.

• Question 222:

  Which statement about fabric failover for Fibre Channel communication is true?

  A. You can enable hardware Fibre Channel failover.
  B. Cisco UCS load balances Fibre Channel traffic between the two fabrics.
  C. You must use a Fibre Channel multipath I/O driver.
  D. You do not have to use anything.
  C. You must use a Fibre Channel multipath I/O driver.

  ---

  https://supportforums.cisco.com/t5/unified-computing-system/san-multi-pathing-best-practices/td- p/1545645 https://www.cisco.com/c/en/us/support/docs/servers-unified-computing/unified-computing-system/116471- configure-npiv-00.html#anc9 https://kb.netapp.com/support/s/article/how-to-verify-windows-fibre-channel-configurations-with- multipathing-i-o-mpio?language=en_US

• Question 223:

  Which three components are parts of the Cisco UCS -Series Blade Server software bundle? (Choose three.)

  A. the adapter firmware
  B. the Kernel and system firmware for fabric interconnects
  C. the BIOS firmware
  D. the IOM firmware
  E. the Cisco UCS Manager software
  F. the board controller firmware
  A. the adapter firmware
  C. the BIOS firmware
  F. the board controller firmware

  ---

  http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_0100.html

• Question 224:

  Which command set must you use to launch the Auto Install of new firmware in a Cisco UCS environment?

  A. UCS-A# scope system UCS-A/system # scope install UCS-A/system/install # install infra infra-vers infrastructure-bundle-version
  B. UCS-A# scope firmware UCS-A/firmware # scope auto-install UCS-A/firmware/auto-install # install infra infra-vers infrastructure-bundle-version
  C. UCS-A# scope firmware UCS-A/firmware # scope install UCS-A/firmware/install # install infra infra-vers infrastructure-bundle-version
  D. UCS-A# scope system UCS-A/system # scope auto-install UCS-A/system/auto-install # install infra infra-vers infrastructure-bundle-version
  B. UCS-A# scope firmware UCS-A/firmware # scope auto-install UCS-A/firmware/auto-install # install infra infra-vers infrastructure-bundle-version

• Question 225:

  Which boot option is recommended for a boot policy because it offers the most service profile mobility within a system?

  A. iSCSI boot
  B. local disk boot
  C. LAN boot
  D. SAN boot
  D. SAN boot

• Question 226:

  You need to provision iSCSI initiator IP pools on a Cisco UCS system. How many iSCSI vNICs can you use per boot policy?

  A. 2
  B. 4
  C. 6
  D. 8
  A. 2

  ---

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/

  b_UCSM_GUI_Configuration_Guide_2_2_chapter_011111.html#task_B3A2111362F645AA9DA80153EDA14FA8

  You can add up to two iSCSI vNICs per boot policy. One vNIC acts as the primary iSCSI boot source, and the other acts as the secondary iSCSI boot source.

• Question 227:

  HOTSPOT

  

  Hot Area:

  

  

• Question 228:

  You have a Primary Fabric Interconnect named UCS-A and a Secondary Fabric Interconnect named UCS-B. You need to configure HTTPS secure management for Cisco UCS Manager by using a key ring named kr2016 and a key size of 1024 bits. Which command should you use?

  A. UCS-B# scope security UCS-B /security # create keyring kr2016 UCS-B /security/keyring* # set size mod1024
  B. UCS-A# scope security UCS-A /security # create keyring name kr2016 UCS-A /security/keyring *# set size 1024
  C. UCS-B# scope security UCS-B /security # create keyring kr2016 UCS-B /security/keyring * # set modulus mod1024
  D. UCS-A# scope security UCS-A /security # create keyring kr2016 UCS-A /security/keyring *# set modulus mod1024
  D. UCS-A# scope security UCS-A /security # create keyring kr2016 UCS-A /security/keyring *# set modulus mod1024

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/CLI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1/ b_Cisco_UCS_Manager_CLI_Administration_Mgmt_Guide_3_1_chapter_0110.html

• Question 229:

  From the Cisco UCS Manager GUI, which two configurations can be performed for Cisco UCS C-Series Rack-Mount Servers from the rack server discovery policy? (Choose two.)

  A. whether the server is discovered immediately or after the acknowledgement of the administrator
  B. defines the scrub policy to be used upon discovery
  C. defines the management IP address to be associated to the server upon discovery
  D. reverts a -Series server from Cisco UCS domain mode to standalone mode
  E. defines the Cisco Host Upgrade Utility ISO file for the rack servers connected to the fabric interconnects
  A. whether the server is discovered immediately or after the acknowledgement of the administrator
  B. defines the scrub policy to be used upon discovery

  ---

  http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_0 1100.html

• Question 230:

  Which two components can be specified in a host firmware package? (Choose two.)

  A. CPU
  B. BIOS
  C. Cisco Integrated Management Controller
  D. LOM
  E. DIMM
  B. BIOS
  C. Cisco Integrated Management Controller