Cisco 300-101 Online Practice Questions and Exam Preparation

Cisco 300-101 Online Questions & Answers

• Question 471:

  Refer to the exhibit. Router DHCP is configured to lease IPv4 and IPv6 addresses to clients on ALS1 and ALS2. Clients on ALS2 receive IPv4 and IPv6 addresses. Clients on ALS1 receive IPv4 addresses. Which configuration on DSW1 allows clients on ALS1 to receive IPv6 addresses?

  

  A. DSW1 (config-if)# ipv6 helper address 2002:404:404::404:404
  B. DSW1 (config)#ipv6 route 2002:404:404::404:404/128 FastEthernet 1/0
  C. DSW1 (dhcp-config)# default-router 2002:A04:A01::A04:A01
  D. DSW1 (config-if)# ipv6 dhcp relay destination 2002:404:404::404:404 GigabitEthernet 1/2
  D. DSW1 (config-if)# ipv6 dhcp relay destination 2002:404:404::404:404 GigabitEthernet 1/2

• Question 472:

  Refer to the exhibit

  

  Which command allows hosts that are connected to FastEthernet0/2 to access the Internet?

  A. ip nat inside source list 10 interface FastEthernet0/1 overload
  B. ip nat outside source static 209.165.200.225 10.10.10.0 overload
  C. ip nat inside source list 10 interface FastEthernet0/2 overload
  D. ip nat outside source list 10 interface FastEthernet0/2 overload
  A. ip nat inside source list 10 interface FastEthernet0/1 overload

• Question 473:

  Which two packet type can an EIGRP router send when a route goes into the Active state ?(Choose two)

  A. update
  B. request
  C. hello
  D. query
  E. reply
  D. query
  E. reply

• Question 474:

  which value does Frame Relay use to identify a connection between a DTE and DCE?

  A. DLCI
  B. IP address
  C. MAC address
  D. VLAN ID
  A. DLCI

• Question 475:

  DRAG DROP

  Drag and drop the statements about authentication, authorization and accounting from the left into the correct categories on the right.

  Select and Place:

  

  

  ---

  AAA offers different solutions that provide access control to network devices. The following services are included within its modular architectural framework:

  + Authentication – The process of validating users based on their identity and predetermined credentials, such as passwords and other mechanisms like digital certificates. Authentication controls access by requiring valid user credentials, which are typically a username and password. With RADIUS, the ASA supports PAP, CHAP, MS-CHAP1, MS-CHAP2, that means Authentication supports encryption.

  + Authorization – The method by which a network device assembles a set of attributes that regulates what tasks the user is authorized to perform. These attributes are measured against a user database. The results are returned to the network device to determine the user's qualifications and restrictions. This database can be located locally on Cisco ASA or it can be hosted on a RADIUS or Terminal Access Controller Access-Control System Plus (TACACS+) server. In summary, Authorization controls access per user after users authenticate.

  + Accounting – The process of gathering and sending user information to an AAA server used to track login times (when the user logged in and logged off) and the services that users access. This information can be used for billing, auditing, and reporting purposes.

• Question 476:

  OSPF chooses routes in which order, regardless of route's administrative distance and metric?

  A. Intra-Area (O) - Inter-Area (O IA) - External Type 1 (E1) - External Type 2 (E2) - NSSA Type 1 (N1) - NSSA Type 2 (N2)
  B. Intra-Area (O) - Inter-Area (O IA) - NSSA Type 1 (N1) - NSSA Type 2 (N2) - External Type 1 (E1) - External Type 2 (E2)
  C. Intra-Area (O) - Inter-Area (O IA) - NSSA Type 1 (N1) - External Type 1 (E1) - NSSA Type 2 (N2) - External Type 2 (E2)
  D. Intra-Area (O) - NSSA Type 1 (N1) - External Type 1 (E1) - Inter-Area (O IA) - NSSA Type 2 (N2) - External Type 2 (E2)
  E. Intra-Area (O) - Inter-Area (O IA) - NSSA Type 1 (N1) - External Type 1 (E1) - NSSA Type 2 (N2) - External Type 2 (E2)
  F. NSSA Type 1 (N1) - NSSA Type 2 (N2) - Intra-Area (O) - Inter-Area (O IA) - External Type 1 (E1) - External Type 2 (E2)
  A. Intra-Area (O) - Inter-Area (O IA) - External Type 1 (E1) - External Type 2 (E2) - NSSA Type 1 (N1) - NSSA Type 2 (N2)

• Question 477:

  What is the range for private AS numbers?

  A. 64512 to 65535
  B. 1 to 64511
  C. 1024 to 65535
  D. 1 to 1024
  A. 64512 to 65535

• Question 478:

  Prior to enabling PPPoE in a virtual private dialup network group, which task must be completed?

  A. Disable CDP on the interface.
  B. Execute the vpdn enable command
  C. Execute the no switchport command.
  D. Enable QoS FIFO for PPPoE support.
  B. Execute the vpdn enable command

• Question 479:

  Which traffic characteristic is the reason that UDP traffic that carries voice and video is assigned to the queue only on a link that is at least 768 kbps?

  A. typically is not fragmented
  B. typically is fragmented
  C. causes windowing
  D. causes excessive delays for video traffic
  A. typically is not fragmented

• Question 480:

  Which technology supports overlapping IP address on a single interface?

  A. policy-based routing
  B. VRF-Lite
  C. On-Demand Routing
  D. QoS
  B. VRF-Lite