Cisco 300-080 Online Practice Questions and Exam Preparation

Cisco 300-080 Online Questions & Answers

• Question 301:

  Refer to the exhibit. Based on the ACK SDP output, what can be concluded?

  

  A. There is no DTMF support for the call.
  B. The total amount of bandwidth for the video channels is 192 kbps.
  C. High-definition video is configured for the endpoints
  D. This event is a multipoint video call with three participants.
  D. This event is a multipoint video call with three participants.

• Question 302:

  You discover that a CCD client is failing to learn patters with RTMT. Which two actions can you take to troubleshoot the problem? (Choose Two)

  A. Verify that SIP trunk between Cisco Unified Communications Manager and the Cisco Unified Presence Server is configured correctly.
  B. Verify that the trunk is selected for the CCD advertising service.
  C. Verify that the trunk is selected for the CCD requesting service.
  D. Verify that EIGRP topology information is available to the SAF Forwarders.
  E. Verify the SAF configuration.
  C. Verify that the trunk is selected for the CCD requesting service.
  E. Verify the SAF configuration.

• Question 303:

  Which set ensures that all SAF clients receive all service advertisements?

  A. (config)#router eigrp saf (config)#service-family ipv4 autonomous –system 208 (config-router-sf)# (config-router-sf)#sf-interface gigabitEthernet0/0 (config-router-sf)#hello-interval 10 (config-router-sf)#split-horizon
  B. (config)#router eigrp saf (config)#service-family ipv4 autonomous –system 208 (config-router-sf)# (config-router-sf)#sf-interface gigabitEthernet0/0 (config-router-sf)#hello-interval 10
  C. (config)#router eigrp saf (config)#service-family ipv4 autonomous –system 208 (config-router-sf)# (config-router-sf)#sf-interface gigabitEthernet0/0 (config-router-sf)#hello-interval 10 (config-router-sf)#no split-horizon
  D. (config)#router eigrp saf (config)#service-family ipv4 autonomous –system 208 (config-router-sf)# (config-router-sf)#sf-interface gigabitEthernet0/0 (config-router-sf)#hello-interval 50 (config-router-sf)#split-horizon
  C. (config)#router eigrp saf (config)#service-family ipv4 autonomous –system 208 (config-router-sf)# (config-router-sf)#sf-interface gigabitEthernet0/0 (config-router-sf)#hello-interval 10 (config-router-sf)#no split-horizon

• Question 304:

  You are troubleshooting why a user cannot make calls to the PSTN. You are reviewing trace files and you have found where the user's IP phone initiates the call but you never see the call go out the gateway. What is the next step in troubleshooting this issue?

  A. Look in the SDL trace file to see if there is a signal to another Cisco Unified CallManager node with the same time-stamp.
  B. Look in the SDL trace file to see if there is a signal to another Cisco Unified CallManager node with the same TCP handle.
  C. Look in the IP Voice Media Streaming App trace file to see if an MTP was invoked.
  D. Look in the MGCP trace file to determine which MGCP gateway the call was sent to.
  A. Look in the SDL trace file to see if there is a signal to another Cisco Unified CallManager node with the same time-stamp.

• Question 305:

  Replication is failing between the Cisco Unified Communications Manager Publisher and Subscriber servers. In which two ways can you verify the database replication status? (Choose two.)

  A. TRACERT
  B. CLI
  C. APIC-EM
  D. PING
  E. RTMT
  B. CLI
  E. RTMT

• Question 306:

  Refer to the exhibit. HQ_MRGL is assigned to the HQ IP phones BR_MRGL is assigned to the BR IP phones. The remote site BR IP phones only support G.711 codec. When a call is placed from an HQ phone to a BR phone, the call fails. Which statement indicates how this issue is resolved?

  

  A. Configure the transcoder at the HQ site and assign it to HQ_MRG
  B. A transcoder is not needed. The HQ phones will automatically change over to G.711 codec.
  C. The transcoder should be assigned to its own MRG, which should then be assigned to the default device pool at HQ.
  D. Configure the transcoder at the BR site and assign it to BR_MRG
  D. Configure the transcoder at the BR site and assign it to BR_MRG

• Question 307:

  Which tool or approach is the most effective to display detailed real-time output of CPU utilization of Cisco Unified Communications Manager servers for troubleshooting purposes?

  A. RTMT
  B. DNA
  C. creating trace files
  D. sniffer traces
  A. RTMT

• Question 308:

  Which statement about device mobility is true?

  A. When local route groups are used, there is no need to configure device mobility groups orphone device CSSs as long as phone line CSSs are used.
  B. When local route groups are used, you must configure device mobility groups and phone device CSSs.
  C. When the device mobility group at the home device pool and roaming device pool are not the same, the Phone will keep the home region.
  D. When device mobility groups at the home device pool and roaming device pool are the same, the phone will keep the home MRGL setting.
  A. When local route groups are used, there is no need to configure device mobility groups orphone device CSSs as long as phone line CSSs are used.

• Question 309:

  Refer to the exhibit. Cisco Unified Communication Manager has been configured with a SAF Security Profile and a SAF Forwarder. In which section of the R1 router configuration should the SAF Forwarder password be entered?

  

  A. interface loopback 0
  B. router eigrp saf
  C. service-family external client
  D. service-family ipv4
  C. service-family external client

• Question 310:

  Refer to the exhibit. After migrating a Cisco IP phone to a new cluster, the phone continues to register with its old Cisco Unified Communications Manager cluster. The Cisco IP phone status message indicates the error that is shown. What is a possible cause for this error condition?

  

  A. The phone cannot reach its new TFTP server.
  B. The phone is not provisioned correctly on the destination cluster.
  C. The new TFTP server is not in the ITL file.
  D. Cisco CallManager services are not running on the destination cluster.
  C. The new TFTP server is not in the ITL file.