Cisco 200-301 Online Practice Questions and Exam Preparation

Cisco 200-301 Online Questions & Answers

• Question 891:

  Refer to the exhibit. An access list is required to permit traffic from any host on interface Gi0/0 and deny traffic from interface Gi0/1. Which access list must be applied?

  

  A. ip access-list standard 99 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.0.255.255
  B. ip access-list standard 99 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.255.255.255
  C. ip access-list standard 199 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.255.255.255
  D. ip access-list standard 199 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.0.255.255
  A. ip access-list standard 99 permit 10.100.100.0 0.0.0.255 deny 192.168.0.0 0.0.255.255

  ---

  
  

• Question 892:

  Which type of DNS record is used to map a host name to an IPv4 address?

  A. MX record
  B. CNAME record
  C. AAAA record
  D. A record
  D. A record

  ---

  An A (Address) record is used in the Domain Name System (DNS) to associate a domain name (hostname) with an IPv4 address. This record translates a user-friendly domain name into the corresponding numerical IP address, allowing browsers and other applications to locate and connect to the correct server.

• Question 893:

  Refer to the exhibit.

  

  Which next-hop IP address has the least desirable metric when sourced from R1?

  A. 10.10.10.5
  B. 10.10.10.3
  C. 10.10.10.4
  D. 10.10.10.2
  B. 10.10.10.3

  ---

  [110/100] = 100 = AD, 100 = metric the more we think about it the more it doesn't make much sense. least should be the one with the highest Metric... all we wanted was to much a normal revision with less debate its so unfortunate that ITEXAMS completes things

• Question 894:

  How does STP prevent forwarding loops at OSI Layer 2?

  A. TTL
  B. MAC address forwarding
  C. Collision avoidance
  D. Port blocking
  D. Port blocking

  ---

  Learned about looping in other training as well. Port blocking prevents traffic from getting stuck going in circles between other ports.

• Question 895:

  An implementer is preparing hardware for virtualization to create virtual machines on a host. What is needed to provide communication between hardware and virtual machines?

  A. hypervisor
  B. router
  C. straight cable
  D. switch
  A. hypervisor

• Question 896:

  Which command should you enter to configure an LLDP delay time of 5 seconds?

  A. lldp timer 5000
  B. lldp holdtime 5
  C. lldp reinit 5000
  D. lldp reinit 5
  D. lldp reinit 5

  ---

  1. lldp holdtime seconds: Specify the amount of time a receiving device should hold the information from your device before discarding it

  2. lldp reinit delay: Specify the delay time in seconds for LLDP to initialize on an interface

  3. lldp timer rate: Set the sending frequency of LLDP updates in seconds

  https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3560/software/release/12-2_55_se/configuration/guide/3560_scg/swlldp.html

• Question 897:

  Why is TCP desired over UDP for application that require extensive error checking, such as HTTPS?

  A. UDP operates without acknowledgments, and TCP sends an acknowledgment for every packet received.
  B. UDP reliably guarantees delivery of all packets, and TCP drops packets under heavy load.
  C. UDP uses flow control mechanisms for the delivery of packets, and TCP uses congestion control for efficient packet delivery.
  D. UDP uses sequencing data tor packets to arrive in order, and TCP offers trie capability to receive packets in random order.
  A. UDP operates without acknowledgments, and TCP sends an acknowledgment for every packet received.

  ---

  UDP does not use sequence numbers or windowing, so there is no need for a three-way handshake to set initial values. If a device using UDP becomes swamped by an excessive number of datagrams, it will simply drop those that it cannot process

• Question 898:

  DRAG DROP

  Refer to the exhibit.

  

  An engineer must configure a static network route between two networks so that host A communicates with host B.

  Drag and drop the commands from the left onto the routers where they must be configured on the right. Not all commands are used.

  Select and Place:

  

  

• Question 899:

  What is a specification for SSIDS?

  A. They are a Cisco proprietary security feature.
  B. They must include one number and one letter.
  C. They define the VLAN on a switch.
  D. They are case sensitive.
  D. They are case sensitive.

• Question 900:

  Which two protocols are used by an administrator for authentication and configuration on access points?

  A. Kerberos
  B. 802.1Q
  C. 802.1x
  D. TACACS+
  E. RADIUS
  D. TACACS+
  E. RADIUS