Cisco 200-301 Online Practice Questions and Exam Preparation

Cisco 200-301 Online Questions & Answers

• Question 881:

  A packet is destined for 10.10.1.22. Which static route does the router choose to forward the packet?

  A. ip route 10.10.1.0 255.255.255.240 10.10.255.1
  B. ip route 10.10.1.20 255.255.255.252 10.10.255.1
  C. ip route 10.10.1.16 255.255.255.252 10.10.255.1
  D. ip route 10.10.1.20 255.255.255.254 10.10.255.1
  B. ip route 10.10.1.20 255.255.255.252 10.10.255.1

  ---

  GROUP SIZE: 128 64 32 16 8 [ 4 ] 2 1
  
  SUBNET: 128 192 224 240 248 [ 252 ] 254 255
  
  CIDR: /25 /26 /27 /28 /29 [ /30 ] /31 /32

  10.10.1.20

  Group size is 4. Start at 0 and go up by 4: 4, 8, 12, 16, 20, 24.

  We land on 20, so that is the network.

  Notice I continued to .24 instead of stopping at .20.

  .24 is the next subnet. .23 is the broadcast. .22 is the last usable host. .21 is the first usable host. .20 is the network.

• Question 882:

  Which role does AI play in monitoring network data flow?

  A. It enhances data packet delivery speeds.
  B. It exclusively predicts device malfunctions.
  C. It simplifies traffic route mapping.
  D. It analyzes patterns for anomaly detection.
  D. It analyzes patterns for anomaly detection.

  ---

  AI and machine learning technologies are used in network monitoring to analyze large volumes of data and identify normal behavior patterns. Once these patterns are established, AI can detect anomalies or unusual behavior, such as traffic spikes, unauthorized access attempts, or other signs of potential security threats. This capability enables proactive management of network performance and security by alerting administrators to issues before they escalate.

• Question 883:

  Which configuration command can you apply to a HSRP router so that its local interface becomes active if all other routers in the group fail?

  A. no additional config is required
  B. standby 1 track ethernet
  C. standby 1 preempt
  D. standby 1 priority 250
  A. no additional config is required

  ---

  Simply because that will be the default behavior routers would follow in the event all other routers in the HSRP group fail, then it would not keep attributes such as priority or preemption. What preemption does in summary is to make sure that the configured Priority on all routers within the same HSRP group is always respected. That is, if R1 is configured on the HSRP group with a priority of 150 but he stands as active since all other routers currently subscribed to that group have a priority 150, then will router will preempt the current active router and will take over hence becoming the new active router. With preemption disabled, the new router does not preempt the current active router, unless routers in the group have to renegotiate their roles based on each router's priority at the time of negotiation.

• Question 884:

  What are two improvements provided by automation for network management in an SDN environment? (Choose two)

  A. Data collection and analysis tools establish a baseline for the network
  B. Artificial intelligence identifies and prevents potential design failures.
  C. Machine learning minimizes the overall error rate when automating troubleshooting processes
  D. New devices are onboarded with minimal effort
  E. Proprietary Cisco APIs leverage multiple network management tools.
  B. Artificial intelligence identifies and prevents potential design failures.
  E. Proprietary Cisco APIs leverage multiple network management tools.

• Question 885:

  Refer to the exhibit. What is the metric for the route to the 192.168.10.33 host?

  

  A. 84
  B. 110
  C. 192
  D. 193
  D. 193

• Question 886:

  Refer to the exhibit.

  

  A network engineer started to configure two directly-connected routers as shown. Which command sequence must the engineer configure on R2 so that the two routers become OSPF neighbors?

  A. interface GigabitEthernet0/1 ip ospf 1 area 1
  B. router ospf 1 network 192.168.12.1 0.0.0.0 area 1
  C. interface GigabitEthernet0/1 ip ospf 1 area 0
  D. router ospf 1 network 192.168.12.0 0.0.0.127 area 0
  A. interface GigabitEthernet0/1 ip ospf 1 area 1

  ---

  
  

  To configure ospf in the interface ip ospf process-id area area-id

• Question 887:

  Refer to the exhibit.

  

  With which metric does router R1 learn the route to host 172.16.0.202?

  A. 90
  B. 110
  C. 32445
  D. 3184439
  C. 32445

• Question 888:

  DRAG DROP

  Drag and drop the characteristic from the left onto the cable type on the right.

  Select and Place:

  

  

• Question 889:

  Which command prevents passwords from being stored in the configuration as plain text on a router or switch?

  A. enable secret
  B. enable password
  C. service password-encryption
  D. username cisco password encrypt
  C. service password-encryption

  ---

  Enable secret only encrypts the password used to enter privileged exec mode. Other passwords like line vty 0 4 password etc will have their passwords visible in the running configuration.

• Question 890:

  Refer to the exhibit.

  

  Which path is used by the router for Internet traffic?

  A. 209.165.200.0/27
  B. 10.10.10.0/28
  C. 0.0.0.0/0
  D. 10.10.13.0/24
  C. 0.0.0.0/0

  ---

  A default route is the route that takes effect when no other route is available for an IP destination address.